1,296 research outputs found
Low latency reconfiguration mechanism for fine-grained processor internal functional units
The strive for performance, low power consumption, and less chip area have been diminishing the reliability and the time to fault occurrences due to wear out of electronic devices. Recent research has shown that functional units within processors usually execute a different amount of operations when running programs. Therefore, these units present different individual wear out during their lifetime. Most existent schemes for re-configuration of processors due to fault detection and other processor parameters are done at the level of cores which is a costly way to achieve redundancy. This paper presents a low latency (approximately 1 clock cycle) software controlled mechanism to reconfigure units within processor cores according to predefined parameters. Such reconfiguration capability delivers features like wear out balance of processor functional units, configuration of units according to the criticality of tasks running on an operating system and configurations to gain in performance (e.g. parallel execution) when possible. The focus of this paper is to show the implemented low latency reconfiguration mechanism and highlight its possible main features
Real-time dynamic hardware reconfiguration for processors with redundant functional units
The tiny logic elements in modern integrated circuits increase the rate of transient failures significantly. Therefore, redundancy on various levels is necessary to retain reliability. However, for mixed-criticality scenarios, the typical processor designs offer either too little fault-tolerance or too much redundancy for one part of the applications. Amongst others, we specifically address redundant processor internal functional units (FU) to cope with transient errors and support wear leveling. A real-time operating system (RTOS) was extended to control our prototypical hardware platform and, since it can be configured deterministically within few clock cycles, we are able to reconfigure the FUs dynamically, at process switching time, according to the specified critically of the running processes. Our mechanisms were integrated into the Plasma processor and the Plasma-RTOS. With few changes to the original software code, it was, for example, possible to quickly change from fault-detecting to fault-correcting modes of the processor on demand
Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)
ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability
DeSyRe: on-Demand System Reliability
The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints
Embedded electronic systems driven by run-time reconfigurable hardware
Abstract
This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen
Esta tesis doctoral abarca el diseño de sistemas electrĂłnicos embebidos basados en tecnologĂa hardware dinámicamente reconfigurable –disponible a travĂ©s de dispositivos lĂłgicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguraciĂłn que proporcione a la FPGA la capacidad de reconfiguraciĂłn dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicaciĂłn particionada en tareas multiplexadas en tiempo y en espacio, optimizando asĂ su implementaciĂłn fĂsica –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalĂşa el flujo de diseño de dicha tecnologĂa a travĂ©s del prototipado de varias aplicaciones de ingenierĂa (sistemas de control, coprocesadores aritmĂ©ticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotaciĂłn en la industria.Resum
Aquesta tesi doctoral estĂ orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinĂ micament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguraciĂł que proporcioni a la FPGA la capacitat de reconfiguraciĂł dinĂ mica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicaciĂł particionada en tasques multiplexades en temps i en espai, optimizant aixĂ la seva implementaciĂł fĂsica –à rea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estĂ tic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalĂşa el fluxe de disseny d’aquesta tecnologia a travĂ©s del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotaciĂł a la indĂşstria
Virtual Runtime Application Partitions for Resource Management in Massively Parallel Architectures
This thesis presents a novel design paradigm, called Virtual Runtime Application Partitions (VRAP), to judiciously utilize the on-chip resources. As the dark silicon era approaches, where the power considerations will allow only a fraction chip to be powered on, judicious resource management will become a key consideration in future designs. Most of the works on resource management treat only the physical components (i.e. computation, communication, and memory blocks) as resources and manipulate the component to application mapping to optimize various parameters (e.g. energy efficiency). To further enhance the optimization potential, in addition to the physical resources we propose to manipulate abstract resources (i.e. voltage/frequency operating point, the fault-tolerance strength, the degree of parallelism, and the configuration architecture). The proposed framework (i.e. VRAP) encapsulates methods, algorithms, and hardware blocks to provide each application with the abstract resources tailored to its needs. To test the efficacy of this concept, we have developed three distinct self adaptive environments: (i) Private Operating Environment (POE), (ii) Private Reliability Environment (PRE), and (iii) Private Configuration Environment (PCE) that collectively ensure that each application meets its deadlines using minimal platform resources. In this work several novel architectural enhancements, algorithms and policies are presented to realize the virtual runtime application partitions efficiently. Considering the future design trends, we have chosen Coarse Grained Reconfigurable Architectures (CGRAs) and Network on Chips (NoCs) to test the feasibility of our approach. Specifically, we have chosen Dynamically Reconfigurable Resource Array (DRRA) and McNoC as the representative CGRA and NoC platforms. The proposed techniques are compared and evaluated using a variety of quantitative experiments. Synthesis and simulation results demonstrate VRAP significantly enhances the energy and power efficiency compared to state of the art.Siirretty Doriast
New Design Techniques for Dynamic Reconfigurable Architectures
L'abstract è presente nell'allegato / the abstract is in the attachmen
- …