Local Oscillator Phase Noise Influence on Single Carrier and OFDM Modulations

Part 17: TelecommunicationsInternational audienceThis paper describes the influence of local oscillator phase noise on single and multi-carrier modulations schemes. The oscillator has the main role on modulation and demodulation process of the radio frequency channels. The synchronization of the entire system depends on the accuracy of this circuit. This work is based on the simulation of these two scenarios under influence of a non-ideal oscillator. The output of the simulation scenario results of error vector magnitude, bit error rate and symbol error rate. The relation of these metrics with the local oscillator phase noise allows the performance estimation the global system. A simple phase noise model is presented with configurable power spectral density and offset frequency

Calculation of the Performance of Communication Systems from Measured Oscillator Phase Noise

Oscillator phase noise (PN) is one of the major problems that affect the performance of communication systems. In this paper, a direct connection between oscillator measurements, in terms of measured single-side band PN spectrum, and the optimal communication system performance, in terms of the resulting error vector magnitude (EVM) due to PN, is mathematically derived and analyzed. First, a statistical model of the PN, considering the effect of white and colored noise sources, is derived. Then, we utilize this model to derive the modified Bayesian Cramer-Rao bound on PN estimation, and use it to find an EVM bound for the system performance. Based on our analysis, it is found that the influence from different noise regions strongly depends on the communication bandwidth, i.e., the symbol rate. For high symbol rate communication systems, cumulative PN that appears near carrier is of relatively low importance compared to the white PN far from carrier. Our results also show that 1/f^3 noise is more predictable compared to 1/f^2 noise and in a fair comparison it affects the performance less.Comment: Accepted in IEEE Transactions on Circuits and Systems-I: Regular Paper

Frequency-domain receiver design for doubly-selective channels

This work is devoted to the broadband wireless transmission techniques, which are serious candidates to be implemented in future broadband wireless and cellular systems, aiming at providing high and reliable data transmission and concomitantly high mobility. In order to cope with doubly-selective channels, receiver structures based on OFDM and SC-FDE block transmission techniques, are proposed, which allow cost-effective implementations, using FFT-based signal processing. The first subject to be addressed is the impact of the number of multipath components, and the diversity order, on the asymptotic performance of OFDM and SC-FDE, in uncoded and for different channel coding schemes. The obtained results show that the number of relevant separable multipath components is a key element that influences the performance of OFDM and SC-FDE schemes. Then, the improved estimation and detection performance of OFDM-based broadcasting systems, is introduced employing SFN (Single Frequency Network) operation. An initial coarse channel is obtained with resort to low-power training sequences estimation, and an iterative receiver with joint detection and channel estimation is presented. The achieved results have shown very good performance, close to that with perfect channel estimation. The next topic is related to SFN systems, devoting special attention to time-distortion effects inherent to these networks. Typically, the SFN broadcast wireless systems employ OFDM schemes to cope with severely time-dispersive channels. However, frequency errors, due to CFO, compromises the orthogonality between subcarriers. As an alternative approach, the possibility of using SC-FDE schemes (characterized by reduced envelope fluctuations and higher robustness to carrier frequency errors) is evaluated, and a technique, employing joint CFO estimation and compensation over the severe time-distortion effects, is proposed. Finally, broadband mobile wireless systems, in which the relative motion between the transmitter and receiver induces Doppler shift which is different or each propagation path, is considered, depending on the angle of incidence of that path in relation to the direction of travel. This represents a severe impairment in wireless digital communications systems, since that multipath propagation combined with the Doppler effects, lead to drastic and unpredictable fluctuations of the envelope of the received signal, severely affecting the detection performance. The channel variations due this effect are very difficult to estimate and compensate. In this work we propose a set of SC-FDE iterative receivers implementing efficient estimation and tracking techniques. The performance results show that the proposed receivers have very good performance, even in the presence of significant Doppler spread between the different groups of multipath components

Exploring the hot-carrier effect on the wireless transceivers

Phase noise can be regarded as the most severe cause of performance degradation in the wireless communication systems. The hot-carriers (HCs), found in the CMOS synchronization circuits, are the high-energy charge carriers that degrade the MOSFET devices’ performance by increasing the threshold voltage required to operate the MOSFETs. The HC effect manifests itself as the phase noise whose level increases with the continued MOSFET operation and such increases result in the performance degradation of the voltage-controlled oscillator (VCO) built on the MOSFETs. The HC effect is particularly evident in the short-channel MOSFET devices. In this dissertation, we analyze the wireless transceiver performances in the presence of the synchronization errors induced by the HC effect, for both single-carrier and multi-carrier communication systems. We derive the relationship between the corresponding system performances and the HC effect in terms of a crucial parameter, the MOSFET threshold voltage. We employ a new phase noise model for the wireless systems influenced by the HC effect, which is based on a new precise phase noise mask function. In addition, we analyze the impact of the phase noise arising from the HC effect on the single-carrier wireless systems in terms of the BER and the signal-to-interference-plus-noise ratio (SINR). We derive the exact BER expression and show the SINR degradation for the QPSK systems that suffer from the phase noise. We apply Monte Carlo simulations to verify our analysis. To study the HC effect thoroughly, we simplify the BER expression as a new asymptotical analysis as the signal-to-noise ratio approaches to infinity and obtain the lower bound of the achievable BER for the single-carrier wireless systems. For multi-carrier systems, we focus our discussions on the orthogonal frequency division multiplexing (OFDM) systems. According to our simulations, we show that the bit-error-rate (BER) evaluation for OFDM using our new phase noise model in the presence of the HCs can be very different up to three orders-of-magnitude from the existing models disregarding the HCs. We have also found that the ICI self-cancellation coding is very effective for combating the phase noise in the OFDM systems

Radio-Communications Architectures

Wireless communications, i.e. radio-communications, are widely used for our different daily needs. Examples are numerous and standard names like BLUETOOTH, WiFI, WiMAX, UMTS, GSM and, more recently, LTE are well-known [Baudoin et al. 2007]. General applications in the RFID or UWB contexts are the subject of many papers. This chapter presents radio-frequency (RF) communication systems architecture for mobile, wireless local area networks (WLAN) and connectivity terminals. An important aspect of today's applications is the data rate increase, especially in connectivity standards like WiFI and WiMAX, because the user demands high Quality of Service (QoS). To increase the data rate we tend to use wideband or multi-standard architecture. The concept of software radio includes a self-reconfigurable radio link and is described here on its RF aspects. The term multi-radio is preferred. This chapter focuses on the transmitter, yet some considerations about the receiver are given. An important aspect of the architecture is that a transceiver is built with respect to the radio-communications signals. We classify them in section 2 by differentiating Continuous Wave (CW) and Impulse Radio (IR) systems. Section 3 is the technical background one has to consider for actual applications. Section 4 summarizes state-of-the-art high data rate architectures and the latest research in multi-radio systems. In section 5, IR architectures for Ultra Wide Band (UWB) systems complete this overview; we will also underline the coexistence and compatibility challenges between CW and IR systems

Self-interference cancellation enabling high-throughput short-reach wireless full-duplex communication

In-band full-duplex (FD) wireless communication allows the simultaneous transmission and reception of data at the same frequency band, effectively doubling the spectral efficiency and data rate while reducing the latency. Previously published designs mostly target the self-interference (SI) cancellation in conventional wireless systems. In this paper, we focus on real-time SI cancellation for short-reach wireless FD systems. The superior signal quality of a point-to-point short-reach wireless system, allows the utilization of wideband communications to achieve a high throughput. Besides, in such wireless systems, the impacts of phase noise and nonlinear distortions are largely reduced, easing the SI cancellation. Moreover, the degradation of signal reception quality due to FD operation is experimentally evaluated in different environments. Experimental results of a prototype implementation show that a combination of antenna isolation and digital cancellation can already achieve an overall SI cancellation performance of 72.5 dB over a bandwidth of 123 MHz. This prototype can support a high-data-rate FD communication link of close to 1 Gbps up to 300 cm with an error vector magnitude lower than -26 dB in a typical indoor environment

Millimeter-Wave System for High Data Rate Indoor Communications

This paper presents the realization of a wireless Gigabit Ethernet communication system operating in the 60 GHz band. The system architecture uses a single carrier modulation. A differential encoded binary phase shift keying modulation and a differential demodulation scheme are adopted for the intermediate frequency blocks. The baseband blocks use Reed- Solomon RS (255, 239) coding and decoding for channel forward error correction (FEC). First results of bit error rate (BER) measurements at 875 Mbps, without channel coding, are presented for different antennas.Comment: 5 page