A Four-Transistor Level Converter for Dual-Voltage Low-Power Design

Power dissipation in digital circuits has become a primary concern in electronic design. With increasing usage of portable devices, there are severe restrictions being placed on the size, weight and power of batteries. In this work, we propose a design of a dual V th feedback type four-transistor level converter (DVF4) with reduced delay and power overheads. The use of DVF4 enhances the effectiveness of a dual-voltage low-power design. The level converter can be used in a circuit with multi supply voltage system where low supply gates may feed into high supply gates resulting in lower power and higher speed than with previously published level converters. The proposed level converter is based on a feedback circuit and employs multi-V th technique. To portray the advantages, we compare the proposed level converter with a previously published level converter for various supply voltages and observe 17.44% to 53% power savings and around 50% delay reduction over the best 32 nm CMOS design available in the literature. The impact of process variations is also examined. When used with dual VDD designs, the new level converter renders up to 61% more energy savings for benchmark circuits in comparison when level converters are not allowed. Furthermore, a level converter flip-flop combination performs better than an existing level converting flip-flop. A single-threshold alternative of the new level converter still remains effective, though over a reduced voltage range

ILP-based Supply and Threshold Voltage Assignment For Total Power Minimization

In this paper we present an ILP-based method to simultaneously assign supply and threshold voltages to individual gates for dynamic and leakage power minimization. In our three-step approach, low power min-flipflop (FF) retiming is first performed to reduce the clock period while taking the FF delay/power into consideration. Next, the subsequent voltage assignment formulated in ILP makes the best possible supply/threshold voltage assignment under the given clock period constraint set by the retiming. Finally, a post-process further refines the voltage assignment solution by exploiting the remaining timing slack in the circuit. Related experiments show that the min-FF retiming plus simultaneous Vdd/Vth assignment approach outperforms the existing max-FF retiming plus Vdd-only assignment approach

A nano-CMOS based universal voltage level converter for multi-VDD SoCs.

Power dissipation of integrated circuits is the most demanding issue for very large scale integration (VLSI) design engineers, especially for portable and mobile applications. Use of multiple supply voltages systems, which employs level converter between two voltage islands is one of the most effective ways to reduce power consumption. In this thesis work, a unique level converter known as universal level converter (ULC), capable of four distinct level converting operations, is proposed. The schematic and layout of ULC are built and simulated using CADENCE. The ULC is characterized by performing three analysis such as parametric, power, and load analysis which prove that the design has an average power consumption reduction of about 85-97% and capable of producing stable output at low voltages like 0.45V even under varying load conditions

Tangle: Route-oriented dynamic voltage minimization for variation-afflicted, energy-efficient on-chip networks

On-chip networks are especially vulnerable to within-die pa-rameter variations. Since they connect distant parts of the chip, they need to be designed to work under the most unfavorable parameter values in the chip. This results in energy-inefficient designs. To improve the energy efficiency of on-chip networks, this paper presents a novel approach that relies on monitoring the errors of messages as they traverse the network. Based on the observed errors of messages, the system dynamically decreases or increases the voltage (Vdd) of groups of network routers. With this approach, called Tangle, the differentVdd val-ues applied to different groups of network routers progressively converge to their lowest, variation-aware, error-free values — always keeping the network frequency unchanged. This saves substantial network energy. In a simulated 64-router network with 4 Vdd domains, Tangle reduces the network energy con-sumption by an average of 22 % with negligible performance impact. In a future network design with one Vdd domain per router, Tangle lowers the network Vdd by an average of 21%, reducing the network energy consumption by an average of 28 % with negligible performance impact. 1

Design of variation-tolerant synchronizers for multiple clock and voltage domains

PhD ThesisParametric variability increasingly affects the performance of electronic circuits as the fabrication technology has reached the level of 32nm and beyond. These parameters may include transistor Process parameters (such as threshold voltage), supply Voltage and Temperature (PVT), all of which could have a significant impact on the speed and power consumption of the circuit, particularly if the variations exceed the design margins. As systems are designed with more asynchronous protocols, there is a need for highly robust synchronizers and arbiters. These components are often used as interfaces between communication links of different timing domains as well as sampling devices for asynchronous inputs coming from external components. These applications have created a need for new robust designs of synchronizers and arbiters that can tolerate process, voltage and temperature variations. The aim of this study was to investigate how synchronizers and arbiters should be designed to tolerate parametric variations. All investigations focused mainly on circuit-level and transistor level designs and were modeled and simulated in the UMC90nm CMOS technology process. Analog simulations were used to measure timing parameters and power consumption along with a “Monte Carlo” statistical analysis to account for process variations. Two main components of synchronizers and arbiters were primarily investigated: flip-flop and mutual-exclusion element (MUTEX). Both components can violate the input timing conditions, setup and hold window times, which could cause metastability inside their bistable elements and possibly end in failures. The mean-time between failures is an important reliability feature of any synchronizer delay through the synchronizer. The MUTEX study focused on the classical circuit, in addition to a number of tolerance, based on increasing internal gain by adding current sources, reducing the capacitive loading, boosting the transconductance of the latch, compensating the existing Miller capacitance, and adding asymmetry to maneuver the metastable point. The results showed that some circuits had little or almost no improvements, while five techniques showed significant improvements by reducing τ and maintaining high tolerance. Three design approaches are proposed to provide variation-tolerant synchronizers. wagging synchronizer proposed to First, the is significantly increase reliability over that of the conventional two flip-flop synchronizer. The robustness of the wagging technique can be enhanced by using robust τ latches or adding one more cycle of synchronization. The second approach is the Metastability Auto-Detection and Correction (MADAC) latch which relies on swiftly detecting a metastable event and correcting it by enforcing the previously stored logic value. This technique significantly reduces the resolution time down from uncertain synchronization technique is proposed to transfer signals between Multiple- Voltage Multiple-Clock Domains (MVD/MCD) that do not require conventional level-shifters between the domains or multiple power supplies within each domain. This interface circuit uses a synchronous set and feedback reset protocol which provides level-shifting and synchronization of all signals between the domains, from a wide range of voltage-supplies and clock frequencies. Overall, synchronizer circuits can tolerate variations to a greater extent by employing the wagging technique or using a MADAC latch, while MUTEX tolerance can suffice with small circuit modifications. Communication between MVD/MCD can be achieved by an asynchronous handshake without a need for adding level-shifters.The Saudi Arabian Embassy in London, Umm Al-Qura University, Saudi Arabi

Integrated Circuits and Systems for Smart Sensory Applications

Connected intelligent sensing reshapes our society by empowering people with increasing new ways of mutual interactions. As integration technologies keep their scaling roadmap, the horizon of sensory applications is rapidly widening, thanks to myriad light-weight low-power or, in same cases even self-powered, smart devices with high-connectivity capabilities. CMOS integrated circuits technology is the best candidate to supply the required smartness and to pioneer these emerging sensory systems. As a result, new challenges are arising around the design of these integrated circuits and systems for sensory applications in terms of low-power edge computing, power management strategies, low-range wireless communications, integration with sensing devices. In this Special Issue recent advances in application-specific integrated circuits (ASIC) and systems for smart sensory applications in the following five emerging topics: (I) dedicated short-range communications transceivers; (II) digital smart sensors, (III) implantable neural interfaces, (IV) Power Management Strategies in wireless sensor nodes and (V) neuromorphic hardware

Circuit and Architecture Co-Design of STT-RAM for High Performance and Low Energy

Spin-Transfer Torque Random Access Memory (STT-RAM) has been proved a promising emerging nonvolatile memory technology suitable for many applications such as cache mem- ory of CPU. Compared with other conventional memory technology, STT-RAM offers many attractive features such as nonvolatility, fast random access speed and extreme low leakage power. However, STT-RAM is still facing many challenges. First of all, programming STT-RAM is a stochastic process due to random thermal fluctuations, so the write errors are hard to avoid. Secondly, the existing STT-RAM cell designs can be used for only single-port accesses, which limits the memory access bandwidth and constraints the system performance. Finally, while other memory technology supports multi-level cell (MLC) design to boost the storage density, adopting MLC to STT-RAM brings many disadvantages such as requirement for large transistor and low access speed. In this work, we proposed solutions on both circuit and architecture level to address these challenges. For the write error issues, we proposed two probabilistic methods, namely write-verify- rewrite with adaptive period (WRAP) and verify-one-while-writing (VOW), for performance improvement and write failure reduction. For dual-port solution, we propose the design methods to support dual-port accesses for STT-RAM. The area increment by introducing an additional port is reduced by leveraging the shared source-line structure. Detailed analysis on the performance/reliability degrada- tion caused by dual-port accesses is performed, and the corresponding design optimization is provided. To unleash the potential of MLC STT-RAM cache, we proposed a new design through a cross-layer co-optimization. The memory cell structure integrated the reversed stacking of magnetic junction tunneling (MTJ) for a more balanced device and design trade-off. In architecture development, we presented an adaptive mode switching mechanism: based on application’s memory access behavior, the MLC STT-RAM cache can dynamically change between low latency SLC mode and high capacity MLC mode. Finally, we present a 4Kb test chip design which can support different types and sizes of MTJs. A configurable sensing solution is used in the test chip so that it can support wide range of MTJ resistance. Such test chip design can help to evaluate various type of MTJs in the future

Variability-aware low-power techniques for nanoscale mixed-signal circuits.

New circuit design techniques that accommodate lower supply voltages necessary for portable systems need to be integrated into the semiconductor intellectual property (IP) core. Systems that once worked at 3.3 V or 2.5 V now need to work at 1.8 V or lower, without causing any performance degradation. Also, the fluctuation of device characteristics caused by process variation in nanometer technologies is seen as design yield loss. The numerous parasitic effects induced by layouts, especially for high-performance and high-speed circuits, pose a problem for IC design. Lack of exact layout information during circuit sizing leads to long design iterations involving time-consuming runs of complex tools. There is a strong need for low-power, high-performance, parasitic-aware and process-variation-tolerant circuit design. This dissertation proposes methodologies and techniques to achieve variability, power, performance, and parasitic-aware circuit designs. Three approaches are proposed: the single iteration automatic approach, the hybrid Monte Carlo and design of experiments (DOE) approach, and the corner-based approach. Widely used mixed-signal circuits such as analog-to-digital converter (ADC), voltage controlled oscillator (VCO), voltage level converter and active pixel sensor (APS) have been designed at nanoscale complementary metal oxide semiconductor (CMOS) and subjected to the proposed methodologies. The effectiveness of the proposed methodologies has been demonstrated through exhaustive simulations. Apart from these methodologies, the application of dual-oxide and dual-threshold techniques at circuit level in order to minimize power and leakage is also explored

Energy efficient core designs for upcoming process technologies

Energy efficiency has been a first order constraint in the design of micro processors for the last decade. As Moore's law sunsets, new technologies are being actively explored to extend the march in increasing the computational power and efficiency. It is essential for computer architects to understand the opportunities and challenges in utilizing the upcoming process technology trends in order to design the most efficient processors. In this work, we consider three process technology trends and propose core designs that are best suited for each of the technologies. The process technologies are expected to be viable over a span of timelines. We first consider the most popular method currently available to improve the energy efficiency, i.e. by lowering the operating voltage. We make key observations regarding the limiting factors in scaling down the operating voltage for general purpose high performance processors. Later, we propose our novel core design, ScalCore, one that can work in high performance mode at nominal Vdd, and in a very energy-efficient mode at low Vdd. The resulting core design can operate at much lower voltages providing higher parallel performance while consuming lower energy. While lowering Vdd improves the energy efficiency, CMOS devices are fundamentally limited in their low voltage operation. Therefore, we next consider an upcoming device technology -- Tunneling Field-Effect Transistors (TFETs), that is expected to supplement CMOS device technology in the near future. TFETs can attain much higher energy efficiency than CMOS at low voltages. However, their performance saturates at high voltages and, therefore, cannot entirely replace CMOS when high performance is needed. Ideally, we desire a core that is as energy-efficient as TFET and provides as much performance as CMOS. To reach this goal, we characterize the TFET device behavior for core design and judiciously integrate TFET units, CMOS units in a single core. The resulting core, called HetCore, can provide very high energy efficiency while limiting the slowdown when compared to a CMOS core. Finally, we analyze Monolithic 3D (M3D) integration technology that is widely considered to be the only way to integrate more transistors on a chip. We present the first analysis of the architectural implications of using M3D for core design and show how to partition the core across different layers. We also address one of the key challenges in realizing the technology, namely, the top layer performance degradation. We propose a critical path based partitioning for logic stages and asymmetric bit/port partitioning for storage stages. The result is a core that performs nearly as well as a core without any top layer slowdown. When compared to a 2D baseline design, an M3D core not only provides much higher performance, it also reduces the energy consumption at the same time. In summary, this thesis addresses one of the fundamental challenges in computer architecture -- overcoming the fact that CMOS is not scaling anymore. As we increase the computing power on a single chip, our ability to power the entire chip keeps decreasing. This thesis proposes three solutions aimed at solving this problem over different timelines. Across all our solutions, we improve energy efficiency without compromising the performance of the core. As a result, we are able to operate twice as many cores with in the same power budget as regular cores, significantly alleviating the problem of dark silicon