Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries

Engineering andPhysical Science ResearchCouncil (EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt to improve standard cell libraries aimed at operation in the subthreshold regime and in Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is examined, with particular emphasis on how subthreshold physical effects degrade robustness, variability and performance. How prevalent these physical effects are in a commercial 65nm library is then investigated by extensive modeling of a BSIM4.5 compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out and post-layout parasitically extracted models simulated to determine the advantages/disadvantages of each. Full custom ring oscillators are designed and manufactured. Measured results reveal a close correlation with the simulated results, with frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices respectively. The experiment provides the first silicon evidence of the improvement capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well as a mechanism of additional temperature stability in the subthreshold regime. A novel sizing strategy is proposed and pursued to determine whether it is able to produce a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit AES cores are synthesized from the novel sizing strategy and compared against a third AES core synthesized from a state-of-the-art subthreshold standard cell library used by ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in energy-per-cycle of 24% and frequency improvement of 8.65X. A comparison to prior art is then performed. Valid cases are presented where the proposed sizing strategy would be a candidate to produce superior subthreshold circuits

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

근사 컴퓨팅을 이용한 회로 노화 보상과 에너지 효율적인 신경망 구현

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 이혁재.Approximate computing reduces the cost (energy and/or latency) of computations by relaxing the correctness (i.e., precision) of computations up to the level, which is dependent on types of applications. Moreover, it can be realized in various hierarchies of computing system design from circuit level to application level. This dissertation presents the methodologies applying approximate computing across such hierarchies; compensating aging-induced delay in logic circuit by dynamic computation approximation (Chapter 1), designing energy-efficient neural network by combining low-power and low-latency approximate neuron models (Chapter 2), and co-designing in-memory gradient descent module with neural processing unit so as to address a memory bottleneck incurred by memory I/O for high-precision data (Chapter 3). The first chapter of this dissertation presents a novel design methodology to turn the timing violation caused by aging into computation approximation error without the reliability guardband or increasing the supply voltage. It can be realized by accurately monitoring the critical path delay at run-time. The proposal is evaluated at two levels: RTL component level and system level. The experimental results at the RTL component level show a significant improvement in terms of (normalized) mean squared error caused by the timing violation and, at the system level, show that the proposed approach successfully transforms the aging-induced timing violation errors into much less harmful computation approximation errors, therefore it recovers image quality up to perceptually acceptable levels. It reduces the dynamic and static power consumption by 21.45% and 10.78%, respectively, with 0.8% area overhead compared to the conventional approach. The second chapter of this dissertation presents an energy-efficient neural network consisting of alternative neuron models; Stochastic-Computing (SC) and Spiking (SP) neuron models. SC has been adopted in various fields to improve the power efficiency of systems by performing arithmetic computations stochastically, which approximates binary computation in conventional computing systems. Moreover, a recent work showed that deep neural network (DNN) can be implemented in the manner of stochastic computing and it greatly reduces power consumption. However, Stochastic DNN (SC-DNN) suffers from problem of high latency as it processes only a bit per cycle. To address such problem, it is proposed to adopt Spiking DNN (SP-DNN) as an input interface for SC-DNN since SP effectively processes more bits per cycle than SC-DNN. Moreover, this chapter resolves the encoding mismatch problem, between two different neuron models, without hardware cost by compensating the encoding mismatch with synapse weight calibration. A resultant hybrid DNN (SPSC-DNN) consists of SP-DNN as bottom layers and SC-DNN as top layers. Exploiting the reduced latency from SP-DNN and low-power consumption from SC-DNN, the proposed SPSC-DNN achieves improved energy-efficiency with lower error-rate compared to SC-DNN and SP-DNN in same network configuration. The third chapter of this dissertation proposes GradPim architecture, which accelerates the parameter updates by in-memory processing which is codesigned with 8-bit floating-point training in Neural Processing Unit (NPU) for deep neural networks. By keeping the high precision processing algorithms in memory, such as the parameter update incorporating high-precision weights in its computation, the GradPim architecture can achieve high computational efficiency using 8-bit floating point in NPU and also gain power efficiency by eliminating massive high-precision data transfers between NPU and off-chip memory. A simple extension of DDR4 SDRAM utilizing bank-group parallelism makes the operation designs in processing-in-memory (PIM) module efficient in terms of hardware cost and performance. The experimental results show that the proposed architecture can improve the performance of the parameter update phase in the training by up to 40% and greatly reduce the memory bandwidth requirement while posing only a minimal amount of overhead to the protocol and the DRAM area.근사 컴퓨팅은 연산의 정확도의 손실을 어플리케이션 별 적절한 수준까지 허용함으로써 연산에 필요한 비용 (에너지나 지연시간)을 줄인다. 게다가, 근사 컴퓨팅은 컴퓨팅 시스템 설계의 회로 계층부터 어플리케이션 계층까지 다양한 계층에 적용될 수 있다. 본 논문에서는 근사 컴퓨팅 방법론을 다양한 시스템 설계의 계층에 적용하여 전력과 에너지 측면에서 이득을 얻을 수 있는 방법들을 제안하였다. 이는, 연산 근사화 (computation Approximation)를 통해 회로의 노화로 인해 증가된 지연시간을 추가적인 전력소모 없이 보상하는 방법과 (챕터 1), 근사 뉴런모델 (approximate neuron model)을 이용해 에너지 효율이 높은 신경망을 구성하는 방법 (챕터 2), 그리고 메모리 대역폭으로 인한 병목현상 문제를 높은 정확도 데이터를 활용한 연산을 메모리 내에서 수행함으로써 완화시키는 방법을 (챕터3) 제안하였다. 첫 번째 챕터는 회로의 노화로 인한 지연시간위반을 (timing violation) 설계마진이나 (reliability guardband) 공급전력의 증가 없이 연산오차 (computation approximation error)를 통해 보상하는 설계방법론 (design methodology)를 제안하였다. 이를 위해 주요경로의 (critical path) 지연시간을 동작시간에 정확하게 측정할 필요가 있다. 여기서 제안하는 방법론은 RTL component와 system 단계에서 평가되었다. RTL component 단계의 실험결과를 통해 제안한 방식이 표준화된 평균제곱오차를 (normalized mean squared error) 상당히 줄였음을 볼 수 있다. 그리고 system 단계에서는 이미지처리 시스템에서 이미지의 품질이 인지적으로 충분히 회복되는 것을 보임으로써 회로노화로 인해 발생한 지연시간위반 오차가 에러의 크기가 작은 연산오차로 변경되는 것을 확인 할 수 있었다. 결론적으로, 제안된 방법론을 따랐을 때 0.8%의 공간을 (area) 더 사용하는 비용을 지불하고 21.45%의 동적전력소모와 (dynamic power consumption) 10.78%의 정적전력소모의 (static power consumption) 감소를 달성할 수 있었다. 두 번째 챕터는 근사 뉴런모델을 활용하는 고-에너지효율의 신경망을 (neural network) 제안하였다. 본 논문에서 사용한 두 가지의 근사 뉴런모델은 확률컴퓨팅과 (stochastic computing) 스파이킹뉴런 (spiking neuron) 이론들을 기반으로 모델링되었다. 확률컴퓨팅은 산술연산들을 확률적으로 수행함으로써 이진연산을 낮은 전력소모로 수행한다. 최근에 확률컴퓨팅 뉴런모델을 이용하여 심층 신경망 (deep neural network)를 구현할 수 있다는 연구가 진행되었다. 그러나, 확률컴퓨팅을 뉴런모델링에 활용할 경우 심층신경망이 매 클락사이클마다 (clock cycle) 하나의 비트만을 (bit) 처리하므로, 지연시간 측면에서 매우 나쁠 수 밖에 없는 문제가 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위하여 스파이킹 뉴런모델로 구성된 스파이킹 심층신경망을 확률컴퓨팅을 활용한 심층신경망 구조와 결합하였다. 스파이킹 뉴런모델의 경우 매 클락사이클마다 여러 비트를 처리할 수 있으므로 심층신경망의 입력 인터페이스로 사용될 경우 지연시간을 줄일 수 있다. 하지만, 확률컴퓨팅 뉴런모델과 스파이킹 뉴런모델의 경우 부호화 (encoding) 방식이 다른 문제가 있다. 따라서 본 논문에서는 해당 부호화 불일치 문제를 모델의 파라미터를 학습할 때 고려함으로써, 파라미터들의 값이 부호화 불일치를 고려하여 조절 (calibration) 될 수 있도록 하여 문제를 해결하였다. 이러한 분석의 결과로, 앞 쪽에는 스파이킹 심층신경망을 배치하고 뒷 쪽애는 확률컴퓨팅 심층신경망을 배치하는 혼성신경망을 제안하였다. 혼성신경망은 스파이킹 심층신경망을 통해 매 클락사이클마다 처리되는 비트 양의 증가로 인한 지연시간 감소 효과와 확률컴퓨팅 심층신경망의 저전력 소모 특성을 모두 활용함으로써 각 심층신경망을 따로 사용하는 경우 대비 우수한 에너지 효율성을 비슷하거나 더 나은 정확도 결과를 내면서 달성한다. 세 번째 챕터는 심층신경망을 8비트 부동소숫점 연산으로 학습하는 신경망처리유닛의 (neural processing unit) 파라미터 갱신을 (parameter update) 메모리-내-연산으로 (in-memory processing) 가속하는 GradPIM 아키텍쳐를 제안하였다. GradPIM은 8비트의 낮은 정확도 연산은 신경망처리유닛에 남기고, 높은 정확도를 가지는 데이터를 활용하는 연산은 (파라미터 갱신) 메모리 내부에 둠으로써 신경망처리유닛과 메모리간의 데이터통신의 양을 줄여, 높은 연산효율과 전력효율을 달성하였다. 또한, GradPIM은 bank-group 수준의 병렬화를 이루어 내 높은 내부 대역폭을 활용함으로써 메모리 대역폭을 크게 확장시킬 수 있게 되었다. 또한 이러한 메모리 구조의 변경이 최소화되었기 때문에 추가적인 하드웨어 비용도 최소화되었다. 실험 결과를 통해 GradPIM이 최소한의 DRAM 프로토콜 변화와 DRAM칩 내의 공간사용을 통해 심층신경망 학습과정 중 파라미터 갱신에 필요한 시간을 40%만큼 향상시켰음을 보였다.Chapter I: Dynamic Computation Approximation for Aging Compensation 1 1.1 Introduction 1 1.1.1 Chip Reliability 1 1.1.2 Reliability Guardband 2 1.1.3 Approximate Computing in Logic Circuits 2 1.1.4 Computation approximation for Aging Compensation 3 1.1.5 Motivational Case Study 4 1.2 Previous Work 5 1.2.1 Aging-induced Delay 5 1.2.2 Delay-Configurable Circuits 6 1.3 Proposed System 8 1.3.1 Overview of the Proposed System 8 1.3.2 Proposed Adder 9 1.3.3 Proposed Multiplier 11 1.3.4 Proposed Monitoring Circuit 16 1.3.5 Aging Compensation Scheme 19 1.4 Design Methodology 20 1.5 Evaluation 24 1.5.1 Experimental setup 24 1.5.2 RTL component level Adder/Multiplier 27 1.5.3 RTL component level Monitoring circuit 30 1.5.4 System level 31 1.6 Summary 38 Chapter II: Energy-Efficient Neural Network by Combining Approximate Neuron Models 40 2.1 Introduction 40 2.1.1 Deep Neural Network (DNN) 40 2.1.2 Low-power designs for DNN 41 2.1.3 Stochastic-Computing Deep Neural Network 41 2.1.4 Spiking Deep Neural Network 43 2.2 Hybrid of Stochastic and Spiking DNNs 44 2.2.1 Stochastic-Computing vs Spiking Deep Neural Network 44 2.2.2 Combining Spiking Layers and Stochastic Layers 46 2.2.3 Encoding Mismatch 47 2.3 Evaluation 49 2.3.1 Latency and Test Error 49 2.3.2 Energy Efficiency 51 2.4 Summary 54 Chapter III: GradPIM: In-memory Gradient Descent in Mixed-Precision DNN Training 55 3.1 Introduction 55 3.1.1 Neural Processing Unit 55 3.1.2 Mixed-precision Training 56 3.1.3 Mixed-precision Training with In-memory Gradient Descent 57 3.1.4 DNN Parameter Update Algorithms 59 3.1.5 Modern DRAM Architecture 61 3.1.6 Motivation 63 3.2 Previous Work 65 3.2.1 Processing-In-Memory 65 3.2.2 Co-design Neural Processing Unit and Processing-In-Memory 66 3.2.3 Low-precision Computation in NPU 67 3.3 GradPIM 68 3.3.1 GradPIM Architecture 68 3.3.2 GradPIM Operations 69 3.3.3 Timing Considerations 70 3.3.4 Update Phase Procedure 73 3.3.5 Commanding GradPIM 75 3.4 NPU Co-design with GradPIM 76 3.4.1 NPU Architecture 76 3.4.2 Data Placement 79 3.5 Evaluation 82 3.5.1 Evaluation Methodology 82 3.5.2 Experimental Results 83 3.5.3 Sensitivity Analysis 88 3.5.4 Layer Characterizations 90 3.5.5 Distributed Data Parallelism 90 3.6 Summary 92 3.6.1 Discussion 92 Bibliography 113 요약 114Docto

Reliable chip design from low powered unreliable components

The pace of technological improvement of the semiconductor market is driven by Moore’s Law, enabling chip transistor density to double every two years. The transistors would continue to decline in cost and size but increase in power. The continuous transistor scaling and extremely lower power constraints in modern Very Large Scale Integrated(VLSI) chips can potentially supersede the benefits of the technology shrinking due to reliability issues. As VLSI technology scales into nanoscale regime, fundamental physical limits are approached, and higher levels of variability, performance degradation, and higher rates of manufacturing defects are experienced. Soft errors, which traditionally affected only the memories, are now also resulting in logic circuit reliability degradation. A solution to these limitations is to integrate reliability assessment techniques into the Integrated Circuit(IC) design flow. This thesis investigates four aspects of reliability driven circuit design: a)Reliability estimation; b) Reliability optimization; c) Fault-tolerant techniques, and d) Delay degradation analysis. To guide the reliability driven synthesis and optimization of combinational circuits, highly accurate probability based reliability estimation methodology christened Conditional Probabilistic Error Propagation(CPEP) algorithm is developed to compute the impact of gate failures on the circuit output. CPEP guides the proposed rewriting based logic optimization algorithm employing local transformations. The main idea behind this methodology is to replace parts of the circuit with functionally equivalent but more reliable counterparts chosen from a precomputed subset of Negation-Permutation-Negation(NPN) classes of 4-variable functions. Cut enumeration and Boolean matching driven by reliability-aware optimization algorithm are used to identify the best possible replacement candidates. Experiments on a set of MCNC benchmark circuits and 8051 functional microcontroller units indicate that the proposed framework can achieve up to 75% reduction of output error probability. On average, about 14% SER reduction is obtained at the expense of very low area overhead of 6.57% that results in 13.52% higher power consumption. The next contribution of the research describes a novel methodology to design fault tolerant circuitry by employing the error correction codes known as Codeword Prediction Encoder(CPE). Traditional fault tolerant techniques analyze the circuit reliability issue from a static point of view neglecting the dynamic errors. In the context of communication and storage, the study of novel methods for reliable data transmission under unreliable hardware is an increasing priority. The idea of CPE is adapted from the field of forward error correction for telecommunications focusing on both encoding aspects and error correction capabilities. The proposed Augmented Encoding solution consists of computing an augmented codeword that contains both the codeword to be transmitted on the channel and extra parity bits. A Computer Aided Development(CAD) framework known as CPE simulator is developed providing a unified platform that comprises a novel encoder and fault tolerant LDPC decoders. Experiments on a set of encoders with different coding rates and different decoders indicate that the proposed framework can correct all errors under specific scenarios. On average, about 1000 times improvement in Soft Error Rate(SER) reduction is achieved. Last part of the research is the Inverse Gaussian Distribution(IGD) based delay model applicable to both combinational and sequential elements for sub-powered circuits. The Probability Density Function(PDF) based delay model accurately captures the delay behavior of all the basic gates in the library database. The IGD model employs these necessary parameters, and the delay estimation accuracy is demonstrated by evaluating multiple circuits. Experiments results indicate that the IGD based approach provides a high matching against HSPICE Monte Carlo simulation results, with an average error less than 1.9% and 1.2% for the 8-bit Ripple Carry Adder(RCA), and 8-bit De-Multiplexer(DEMUX) and Multiplexer(MUX) respectively

Urban Challenges and Urban Design Approaches for Resource-Efficient and Climate-Sensitive Urban Design in the MENA Region

Printausgabe unter ISBN 978-3-7983-2534-0, ISSN 2193-6099 erschienenIn an era defined by climate change, huge resource consumption, a lack of social cohesion, rapidly accelerating technological innovations, economic shifts, and the transformation of political systems, solutions must be pursued at every level of action. This book shows how solutions from urban design and planning can, by integrating the approaches of multiple disciplines, be the first steps toward envisioning the sustainable, energy-efficient, and climate-sensitive city of the future. This book is compiled for readers from a range of professional backgrounds. Its intended audience includes the government bodies, municipalities, urban planners, engineers, architects, civil servants, and citizens who are part of urban development, from initiation through implementation. The facts and findings presented herein are relevant to any national or international debate concerning urban development which aims to create sustainable, resource-efficient, and climate-sensitive urbanization processes. The text and visuals of this book are intended to serve as a comprehensive decision support tool, taking into account that current and future urban challenges and planning tasks can only be tackled through an interlinked and stakeholder driven iterative process. As a result of the Young Cities research project, this book acts as a multilayered reference manual by providing: (a) a brief outline of the MENA region’s urban challenges; (b) a proposal for generic principles and actions for creating an energy- and resource-efficient as well as environmentally sustainable urban environment; (c) the opportunities and impacts of each discipline involved in an integrated planning process; and (d) the findings of the applied principles in the 35 ha “Shahre Javan Community” pilot project

Clean energy and environment: combating climate change by Hong Kong researchers and professionals

published_or_final_versio

Multi-gigabit CMOS analog-to-digital converter and mixed-signal demodulator for low-power millimeter-wave communication systems

The objective of the research is to develop high-speed ADCs and mixed-signal demodulator for multi-gigabit communication systems using millimeter-wave frequency bands in standard CMOS technology. With rapid advancements in semiconductor technologies, mobile communication devices have become more versatile, portable, and inexpensive over the last few decades. However, plagued by the short lifetime of batteries, low power consumption has become an extremely important specification in developing mobile communication devices. The ever-expanding demand of consumers to access and share information ubiquitously at faster speeds requires higher throughputs, increased signal-processing functionalities at lower power and lower costs. In today’s technology, high-speed signal processing and data converters are incorporated in almost all modern multi-gigabit communication systems. They are key enabling technologies for scalable digital design and implementation of baseband signal processors. Ultimately, the merits of a high performance mixed-signal receiver, such as data rate, sensitivity, signal dynamic range, bit-error rate, and power consumption, are directly related to the quality of the embedded ADCs. Therefore, this dissertation focuses on the analysis and design of high-speed ADCs and a novel broadband mixed-signal demodulator with a fully-integrated DSP composed of low-cost CMOS circuitry. The proposed system features a novel dual-mode solution to demodulate multi-gigabit BPSK and ASK signals. This approach reduces the resolution requirement of high-speed ADCs, while dramatically reducing its power consumption for multi-gigabit wireless communication systems.PhDGee-Kung Chang - Committee Chair; Chang-Ho Lee - Committee Member; Geoffrey Ye Li - Committee Member; Paul A. Kohl - Committee Member; Shyh-Chiang Shen - Committee Membe