The Fundamental Limits of Broadcasting in Dense Wireless Mobile Networks

In this paper, we investigate the fundamental properties of broadcasting in {em mobile} wireless networks. In particular, we characterize broadcast capacity and latency of a mobile network, subject to the condition that the stationary node spatial distribution generated by the mobility model is uniform. We first study the intrinsic properties of broadcasting, and present the {sc RippleCast} broadcasting scheme that simultaneously achieves asymptotically optimal broadcast capacity and latency, subject to a weak upper bound on maximum node velocity and under the assumption of static broadcast source. We then extend {sc RippleCast} with the novel notion of center-casting, and prove that asymptotically optimal broadcast capacity and latency can be achieved also when the broadcast source is mobile. This study intendedly ignores the burden related to the selection of broadcast relay nodes within the mobile network, and shows that optimal broadcasting in mobile networks is, in principle, possible. We then investigate the broadcasting problem when the relay selection burden is taken into account, and present a combined distributed leader election and broadcasting scheme achieving a broadcast capacity and latency which is within a $Theta((log n)^{1+frac{2}{alpha}})$ factor from optimal, where $n$ is the number of mobile nodes and $alpha>2$ is the path loss exponent. However, this result holds only under the assumption that the upper bound on node velocity converges to zero (although with a very slow, poly-logarithmic rate) as $n$ grows to infinity

On the Data Gathering Capacity and Latency in Wireless

In this paper, we investigate the fundamental properties of data gathering in wirelesssensor networks, in terms of both transport capacity and latency. We consider a scenarioin which s(n) out of n total network nodes have to deliver data to a set of d(n) sink nodesat a constant rate f(n; s(n); d(n)). The goal is to characterize the maximum achievablerate, and the latency in data delivery. We present a simple data gathering scheme thatachieves asymptotically optimal data gathering capacity and latency with arbitrary net-work deployments when d(n) = 1, and for most scaling regimes of s(n) and d(n) whend(n) > 1 in case of square grid and random node deployments. Differently from mostprevious work, our results and the presented data gathering scheme do not sacrifice en-ergy efficiency to the need of maximizing capacity and minimizing latency. Finally, weconsider the effects of a simple form of data aggregation on data gathering performance,and show that capacity can be increased of a factor f(n) with respect to the case of nodata aggregation, where f(n) is the node density. To the best of our knowledge, theones presented in this paper are the first results showing that asymptotically optimal datagathering capacity and latency can be achieved in arbitrary networks in an energy efficientway

On the Fundamental Limits of Broadcasting in Wireless Mobile Networks

In this talk, we investigate the fundamental properties of broadcasting in mobile wireless networks. In particular, we characterize broadcast capacity and latency of a mobile network, subject to the condition that the stationary node spatial distribution generated by the mobility model is uniform. We first study the intrinsic properties of broadcasting, and present a broadcasting scheme, called RippleCast, that simultaneously achieves asymptotically optimal broadcast capacity and latency, subject to a weak upper bound on the maximum node velocity. This study intendedly ignores the burden related to the selection of broadcast relay nodes within the mobile network, and shows that optimal broadcasting in mobile networks is, in principle, possible. We then investigate the broadcasting problem when the relay selection burden is taken into account, and present a combined distributed leader election and broadcasting scheme achieving a broadcast capacity and latency which is within a $Theta((log n)^{1+frac{2}{alpha}})$ factor from optimal, where $n$ is the number of mobile nodes and $alpha>2$ is the path loss exponent. However, this result holds only under the assumption that the upper bound on node velocity converges to zero (although with a very slow, poly-logarithmic rate) as $n$ grows to infinity. To the best of our knowledge, our is the first paper investigating the effects of node mobility on the fundamental properties of broadcasting, and showing that, while optimal broadcasting in a mobile network is in principle possible, the coordination efforts related to the selection of broadcast relay nodes lead to sub-optimal broadcasting performance

A fast and reliable broadcast service for LTE-advanced exploiting multihop device-to-device transmissions

Several applications, from the Internet of Things for smart cities to those for vehicular networks, need fast and reliable proximity-based broadcast communications, i.e., the ability to reach all peers in a geographical neighborhood around the originator of a message, as well as ubiquitous connectivity. In this paper, we point out the inherent limitations of the LTE (Long-Term Evolution) cellular network, which make it difficult, if possible at all, to engineer such a service using traditional infrastructure-based communications. We argue, instead, that network-controlled device-to-device (D2D) communications, relayed in a multihop fashion, can efficiently support this service. To substantiate the above claim, we design a proximity-based broadcast service which exploits multihop D2D. We discuss the relevant issues both at the UE (User Equipment), which has to run applications, and within the network (i.e., at the eNodeBs), where suitable resource allocation schemes have to be enforced. We evaluate the performance of a multihop D2D broadcasting using system-level simulations, and demonstrate that it is fast, reliable and economical from a resource consumption standpoint

Optimal Control for Generalized Network-Flow Problems

We consider the problem of throughput-optimal packet dissemination, in the presence of an arbitrary mix of unicast, broadcast, multicast, and anycast traffic, in an arbitrary wireless network. We propose an online dynamic policy, called Universal Max-Weight (UMW), which solves the problem efficiently. To the best of our knowledge, UMW is the first known throughput-optimal policy of such versatility in the context of generalized network flow problems. Conceptually, the UMW policy is derived by relaxing the precedence constraints associated with multi-hop routing and then solving a min-cost routing and max-weight scheduling problem on a virtual network of queues. When specialized to the unicast setting, the UMW policy yields a throughput-optimal cycle-free routing and link scheduling policy. This is in contrast with the well-known throughput-optimal back-pressure (BP) policy which allows for packet cycling, resulting in excessive latency. Extensive simulation results show that the proposed UMW policy incurs a substantially smaller delay as compared with the BP policy. The proof of throughput-optimality of the UMW policy combines ideas from the stochastic Lyapunov theory with a sample path argument from adversarial queueing theory and may be of independent theoretical interest

Cross-layer schemes for performance optimization in wireless networks

Wireless networks are undergoing rapid progress and inspiring numerous applications. As the application of wireless networks becomes broader, they are expected to not only provide ubiquitous connectivity, but also support end users with certain service guarantees. End-to-end delay is an important Quality of Service (QoS) metric in multihop wireless networks. This dissertation addresses how to minimize end-to-end delay through joint optimization of network layer routing and link layer scheduling. Two cross-layer schemes, a loosely coupled cross-layer scheme and a tightly coupled cross-layer scheme, are proposed. The two cross-layer schemes involve interference modeling in multihop wireless networks with omnidirectional antenna. In addition, based on the interference model, multicast schedules are optimized to minimize the total end-to-end delay. Throughput is another important QoS metric in wireless networks. This dissertation addresses how to leverage the spatial multiplexing function of MIMO links to improve wireless network throughput. Wireless interference modeling of a half-duplex MIMO node is presented. Based on the interference model, routing, spatial multiplexing, and scheduling are jointly considered in one optimization model. The throughput optimization problem is first addressed in constant bit rate networks and then in variable bit rate networks. In a variable data rate network, transmitters can use adaptive coding and modulation schemes to change their data rates so that the data rates are supported by the Signal to Noise and Interference Ratio (SINR). The problem of achieving maximum throughput in a millimeter-wave wireless personal area network is studied --Abstract, page iv

Infocast: A New Paradigm for Collaborative Content Distribution from Roadside Units to Vehicular Networks Using Rateless Codes

In this paper, we address the problem of distributing a large amount of bulk data to a sparse vehicular network from roadside infostations, using efficient vehicle-to-vehicle collaboration. Due to the highly dynamic nature of the underlying vehicular network topology, we depart from architectures requiring centralized coordination, reliable MAC scheduling, or global network state knowledge, and instead adopt a distributed paradigm with simple protocols. In other words, we investigate the problem of reliable dissemination from multiple sources when each node in the network shares a limited amount of its resources for cooperating with others. By using \emph{rateless} coding at the Road Side Unit (RSU) and using vehicles as data carriers, we describe an efficient way to achieve reliable dissemination to all nodes (even disconnected clusters in the network). In the nutshell, we explore vehicles as mobile storage devices. We then develop a method to keep the density of the rateless codes packets as a function of distance from the RSU at the desired level set for the target decoding distance. We investigate various tradeoffs involving buffer size, maximum capacity, and the mobility parameter of the vehicles

Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan