2,131 research outputs found
LTE as a potential standard for public safety indoor body-to-body networks
In this paper, a wideband indoor body-to-body communication channel is characterized and analyzed into detail by means of the RMS delay spread and the 50% correlation bandwidth. These body-to-body channel parameters are calculated based on high-resolution power delay profiles, directly provided by the Elektrobit channel sounder, and are further analyzed using a ray tracing algorithm. We have replicated a real-life rescue operation, performed by two firefighters as part of the Rapid Intervention Team searching for potential victims, operating at the same floor of an office block. Both firefighters, who were simultaneously moving around in the vicinity of each other, were equipped with two cavity-backed Substrate Integrated Waveguide textile antennas unobtrusively integrated in the front and back section of their jackets, allowing us to analyze four independent body-to-body links. Furthermore, we prove that the Long Term Evolution (LTE) and, by extension, the LTE -Device to Device (LTE-D2D) standard is compatible with this indoor body-to-body channel. This could provide high data rate indoor communication between rescuers, enabling multimedia broadcast and realtime communication of on-body sensor data in public safety networks
Wearable Communications in 5G: Challenges and Enabling Technologies
As wearable devices become more ingrained in our daily lives, traditional
communication networks primarily designed for human being-oriented applications
are facing tremendous challenges. The upcoming 5G wireless system aims to
support unprecedented high capacity, low latency, and massive connectivity. In
this article, we evaluate key challenges in wearable communications. A
cloud/edge communication architecture that integrates the cloud radio access
network, software defined network, device to device communications, and
cloud/edge technologies is presented. Computation offloading enabled by this
multi-layer communications architecture can offload computation-excessive and
latency-stringent applications to nearby devices through device to device
communications or to nearby edge nodes through cellular or other wireless
technologies. Critical issues faced by wearable communications such as short
battery life, limited computing capability, and stringent latency can be
greatly alleviated by this cloud/edge architecture. Together with the presented
architecture, current transmission and networking technologies, including
non-orthogonal multiple access, mobile edge computing, and energy harvesting,
can greatly enhance the performance of wearable communication in terms of
spectral efficiency, energy efficiency, latency, and connectivity.Comment: This work has been accepted by IEEE Vehicular Technology Magazin
Radio frequency radiation measurement for base tower station safety compliances: a case study in Pulau Pinang Malaysia
The residence of Pulau Pinang and Malaysia generally are worried with the possible health effects due to Base Tower Station (BTS) radiation. Particularly, the residents of Pulau Pinang are utilizing their mobile phones for multiple kind of tasks including communications, browsing the internet and other applications. With the recent advances in mobile communication technologies, the end user demanded a better coverage, great communication services, and faster speed for internet browsing. To fulfill the demand, service provider and communication companies are providing plenty of communication base tower leading to the beliefs of that the tower emitted radiation and cause harmful effect to human health and voiced out and complain to the municipal councils in Malaysia. In this paper, a measurement was conducted to study electromagnetic fields (EMF) radiation level in Pulau Pinang. The measurement is compared with the international standard provided by International Commission of Non-Ionizing Radiation Protection (ICNIRP). Far field measurement of different values of long term evolution (LTE) exposure was demonstrated in radiofrequency (RF) shielded environment. LTE850, LTE1800 and LTE2600 field exposure was compared in term of its’ electrical field and power density that adhere to the standard provided by ICNIRP
D2D-based Cooperative Positioning Paradigm for Future Wireless Systems: A Survey
Emerging communication network applications require a location accuracy of less than 1m in more than 95% of the service area. For this purpose, 5G New Radio (NR) technology is designed to facilitate high-accuracy continuous localization. In 5G systems, the existence of high-density small cells and the possibility of the device-to-device (D2D) communication between mobile terminals paves the way for cooperative positioning applications. From the standardization perspective, D2D technology is already under consideration (5G NR Release 16) for ultra-dense networks enabling cooperative positioning and is expected to achieve the ubiquitous positioning of below one-meter accuracy, thereby fulfilling the 5G requirements. In this survey, the strengths and weaknesses of D2D as an enabling technology for cooperative cellular positioning are analyzed (including two D2D approaches to perform cooperative positioning); lessons learned and open issues are highlighted to serve as guidelines for future research
Direct communication radio Iinterface for new radio multicasting and cooperative positioning
Cotutela: Universidad de defensa UNIVERSITA’ MEDITERRANEA DI REGGIO CALABRIARecently, the popularity of Millimeter Wave (mmWave) wireless networks has increased due to their capability to cope with the escalation of mobile data demands caused by the unprecedented proliferation of smart devices in the fifth-generation (5G). Extremely high frequency or mmWave band is a fundamental pillar in the provision of the expected gigabit data rates. Hence, according to both academic and industrial communities, mmWave technology, e.g., 5G New Radio (NR) and WiGig (60 GHz), is considered as one of the main components of 5G and beyond networks. Particularly, the 3rd Generation Partnership Project (3GPP) provides for the use of licensed mmWave sub-bands for the 5G mmWave cellular networks, whereas IEEE actively explores the unlicensed band at 60 GHz for the next-generation wireless local area networks. In this regard, mmWave has been envisaged as a new technology
layout for real-time heavy-traffic and wearable applications.
This very work is devoted to solving the problem of mmWave band communication system while enhancing its advantages through utilizing the direct communication radio interface for NR multicasting, cooperative positioning, and mission-critical applications. The main contributions presented in this work include: (i) a set of mathematical frameworks and simulation tools to characterize multicast traffic delivery in mmWave directional systems; (ii) sidelink
relaying concept exploitation to deal with the channel condition deterioration of dynamic multicast systems and to ensure mission-critical and ultra-reliable low-latency communications; (iii) cooperative positioning techniques analysis for enhancing cellular positioning accuracy for 5G+ emerging applications that require not only improved communication characteristics but also precise localization.
Our study indicates the need for additional mechanisms/research that can be utilized: (i) to further improve multicasting performance in 5G/6G systems; (ii) to investigate sideline aspects, including, but not limited to, standardization perspective and the next relay selection strategies; and (iii) to design cooperative positioning systems based on Device-to-Device (D2D) technology
- …