49 research outputs found
Resource allocation and feedback in wireless multiuser networks
This thesis focuses on the design of algorithms for resource allocation and feedback in wireless multiuser and heterogeneous networks. In particular, three key design challenges expected to have a major impact on future wireless networks are considered: cross-layer scheduling; structured quantization codebook design for MU-MIMO networks with limited feedback; and resource allocation to provide physical layer security. The first design challenge is cross-layer scheduling, where policies are proposed for two network architectures: user scheduling in single-cell multiuser networks aided by a relay; and base station (BS) scheduling in CoMP. These scheduling policies are then analyzed to guarantee satisfaction of three performance metrics: SEP; packet delay; and packet loss probability (PLP) due to buffer overflow. The concept of the τ-achievable PLP region is also introduced to explicitly describe the tradeoff in PLP between different users. The second design challenge is structured quantization codebook design in wireless networks with limited feedback, for both MU-MIMO and CoMP. In the MU-MIMO network, two codebook constructions are proposed, which are based on structured transformations of a base codebook. In the CoMP network, a low-complexity construction is proposed to solve the problem of variable codebook dimensions due to changes in the number of coordinated BSs. The proposed construction is shown to have comparable performance with the standard approach based on a random search, while only requiring linear instead of exponential complexity. The final design challenge is resource allocation for physical layer security in MU-MIMO. To guarantee physical layer security, the achievable secrecy sum-rate is explicitly derived for the regularized channel inversion (RCI) precoder. To improve performance, power allocation and precoder design are jointly optimized using a new algorithm based on convex optimization techniques
Resource allocation and feedback in wireless multiuser networks
This thesis focuses on the design of algorithms for resource allocation and feedback in wireless multiuser and heterogeneous networks. In particular, three key design challenges expected to have a major impact on future wireless networks are considered: cross-layer scheduling; structured quantization codebook design for MU-MIMO networks with limited feedback; and resource allocation to provide physical layer security. The first design challenge is cross-layer scheduling, where policies are proposed for two network architectures: user scheduling in single-cell multiuser networks aided by a relay; and base station (BS) scheduling in CoMP. These scheduling policies are then analyzed to guarantee satisfaction of three performance metrics: SEP; packet delay; and packet loss probability (PLP) due to buffer overflow. The concept of the τ-achievable PLP region is also introduced to explicitly describe the tradeoff in PLP between different users. The second design challenge is structured quantization codebook design in wireless networks with limited feedback, for both MU-MIMO and CoMP. In the MU-MIMO network, two codebook constructions are proposed, which are based on structured transformations of a base codebook. In the CoMP network, a low-complexity construction is proposed to solve the problem of variable codebook dimensions due to changes in the number of coordinated BSs. The proposed construction is shown to have comparable performance with the standard approach based on a random search, while only requiring linear instead of exponential complexity. The final design challenge is resource allocation for physical layer security in MU-MIMO. To guarantee physical layer security, the achievable secrecy sum-rate is explicitly derived for the regularized channel inversion (RCI) precoder. To improve performance, power allocation and precoder design are jointly optimized using a new algorithm based on convex optimization techniques
MSE minimized joint transmission in coordinated multipoint systems with sparse feedback and constrained backhaul requirements
In a joint transmission coordinated multipoint (JT-CoMP) system, a shared spectrum is utilized by all neighbor cells. In the downlink, a group of base stations (BSs) coordinately transmit the users’ data to avoid serious interference at the users in the boundary of the cells, thus substantially improving area fairness. However, this comes at the cost of high feedback and backhaul load; In a frequency division duplex system, all users at the cell boundaries have to collect and send feedback of the downlink channel state information (CSI). In centralized JT-CoMP, although with capabilities for perfect coordination, a central coordination node have to send the computed precoding weights and corresponding data to all cells which can overwhelm the backhaul resources. In this paper, we design a JT-CoMP scheme, by which the sum of the mean square error (MSE) at the boundary users is minimized, while feedback and backhaul loads are constrained and the load is balanced between BSs. Our design is based on the singular value decomposition of CSI matrix and optimization of a binary link selection matrix to provide sparse feedback—constrained backhaul link. For comparison, we adopt the previously presented schemes for feedback and backhaul reduction in the physical layer. Extensive numerical evaluations show that the proposed scheme can reduce the MSE with at least 25 % , compared to the adopted and existing schemes
Recommended from our members
Improving next-generation wireless network performance and reliability with deep learning
A rudimentary question whether machine learning in general, or deep learning in particular, could add to the well-established field of wireless communications, which has been evolving for close to a century, is often raised. While the use of deep learning based methods is likely to help build intelligent wireless solutions, this use becomes particularly challenging for the lower layers in the wireless communication stack. The introduction of the fifth generation of wireless communications (5G) has triggered the demand for “network intelligence” to support its promises for very high data rates and extremely low latency. Consequently, 5G wireless operators are faced with the challenges of network complexity, diversification of services, and personalized user experience. Industry standards have created enablers (such as the network data analytics function), but these enablers focus on post-mortem analysis at higher stack layers and have a periodicity in the time scale of seconds (or larger). The goal of this dissertation is to show a solution for these challenges and how a data-driven approach using deep learning could add to the field of wireless communications. In particular, I propose intelligent predictive and prescriptive abilities to boost reliability and eliminate performance bottlenecks in 5G cellular networks and beyond, show contributions that justify the value of deep learning in wireless communications across several different layers, and offer in-depth analysis and comparisons with baselines and industry standards. First, to improve multi-antenna network reliability against wireless impairments with power control and interference coordination for both packetized voice and beamformed data bearers, I propose the use of a joint beamforming, power control, and interference coordination algorithm based on deep reinforcement learning. This algorithm uses a string of bits and logic operations to enable simultaneous actions to be performed by the reinforcement learning agent. Consequently, a joint reward function is also proposed. I compare the performance of my proposed algorithm with the brute force approach and show that similar performance is achievable but with faster run-time as the number of transmit antennas increases. Second, in enhancing the performance of coordinated multipoint, I propose the use of deep learning binary classification to learn a surrogate function to trigger a second transmission stream instead of depending on the popular signal to interference plus noise measurement quantity. This surrogate function improves the users' sum-rate through focusing on pre-logarithmic terms in the sum-rate formula, which have larger impact on this rate. Third, performance of band switching can be improved without the need for a full channel estimation. My proposal of using deep learning to classify the quality of two frequency bands prior to granting the band switching leads to a significant improvement in users' throughput. This is due to the elimination of the industry standard measurement gap requirement—a period of silence where no data is sent to the users so they could measure the frequency bands before switching. In this dissertation, a group of algorithms for wireless network performance and reliability for downlink are proposed. My results show that the introduction of user coordinates enhance the accuracy of the predictions made with deep learning. Also, the choice of signal to interference plus noise ratio as the optimization objective may not always be the best choice to improve user throughput rates. Further, exploiting the spatial correlation of channels in different frequency bands can improve certain network procedures without the need for perfect knowledge of the per-band channel state information. Hence, an understanding of these results help develop novel solutions to enhancing these wireless networks at a much smaller time scale compared to the industry standards todayElectrical and Computer Engineerin
Advanced wireless communications using large numbers of transmit antennas and receive nodes
The concept of deploying a large number of antennas at the base station, often called massive multiple-input multiple-output (MIMO), has drawn considerable interest because of its potential ability to revolutionize current wireless communication systems. Most literature on massive MIMO systems assumes time division duplexing (TDD), although frequency division duplexing (FDD) dominates current cellular systems. Due to the large number of transmit antennas at the base station, currently standardized approaches would require a large percentage of the precious downlink and uplink resources in FDD massive MIMO be used for training signal transmissions and channel state information (CSI) feedback. First, we propose practical open-loop and closed-loop training frameworks to reduce the overhead of the downlink training phase. We then discuss efficient CSI quantization techniques using a trellis search. The proposed CSI quantization techniques can be implemented with a complexity that only grows linearly with the number of transmit antennas while the performance is close to the optimal case. We also analyze distributed reception using a large number of geographically separated nodes, a scenario that may become popular with the emergence of the Internet of Things. For distributed reception, we first propose coded distributed diversity to minimize the symbol error probability at the fusion center when the transmitter is equipped with a single antenna. Then we develop efficient receivers at the fusion center using minimal processing overhead at the receive nodes when the transmitter with multiple transmit antennas sends multiple symbols simultaneously using spatial multiplexing
INTERFERENCE MANAGEMENT IN LTE SYSTEM AND BEYOUND
The key challenges to high throughput in cellular wireless communication system are interference, mobility and bandwidth limitation. Mobility has never been a problem until recently, bandwidth has been constantly improved upon through the evolutions in cellular wireless communication system but interference has been a constant limitation to any improvement that may have resulted from such evolution. The fundamental challenge to a system designer or a researcher is how to achieve high data rate in motion (high speed) in a cellular system that is intrinsically interference-limited.
Multi-antenna is the solution to data on the move and the capacity of multi-antenna system has been demonstrated to increase proportionally with increase in the number of antennas at both transmitter and receiver for point-to-point communications and multi-user environment. However, the capacity gain in both uplink and downlink is limited in a multi-user environment like cellular system by interference, the number of antennas at the base station, complexity and space constraint particularly for a mobile terminal.
This challenge in the downlink provided the motivation to investigate successive interference cancellation (SIC) as an interference management tool LTE system and beyond. The Simulation revealed that ordered successive interference (OSIC) out performs non-ordered successive interference cancellation (NSIC) and the additional complexity is justified based on the associated gain in BER performance of OSIC. The major drawback of OSIC is that it is not efficient in network environment employing power control or power allocation. Additional interference management techniques will be required to fully manage the interference.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Linear Transmit-Receive Strategies for Multi-user MIMO Wireless Communications
Die Notwendigkeit zur Unterdrueckung von Interferenzen auf der einen Seite
und zur Ausnutzung der durch Mehrfachzugriffsverfahren erzielbaren Gewinne
auf der anderen Seite rueckte die raeumlichen Mehrfachzugriffsverfahren
(Space Division Multiple Access, SDMA) in den Fokus der Forschung. Ein
Vertreter der raeumlichen Mehrfachzugriffsverfahren, die lineare
Vorkodierung, fand aufgrund steigender Anzahl an Nutzern und Antennen in
heutigen und zukuenftigen Mobilkommunikationssystemen besondere Beachtung,
da diese Verfahren das Design von Algorithmen zur Vorcodierung
vereinfachen. Aus diesem Grund leistet diese Dissertation einen Beitrag zur
Entwicklung linearer Sende- und Empfangstechniken fuer MIMO-Technologie mit
mehreren Nutzern. Zunaechst stellen wir ein Framework zur Approximation des
Datendurchsatzes in Broadcast-MIMO-Kanaelen mit mehreren Nutzern vor. In
diesem Framework nehmen wir das lineare Vorkodierverfahren regularisierte
Blockdiagonalisierung (RBD) an. Durch den Vergleich von Dirty Paper Coding
(DPC) und linearen Vorkodieralgorithmen (z.B. Zero Forcing (ZF) und
Blockdiagonalisierung (BD)) ist es uns moeglich, untere und obere Schranken
fuer den Unterschied bezueglich Datenraten und bezueglich Leistung zwischen
beiden anzugeben. Im Weiteren entwickeln wir einen Algorithmus fuer
koordiniertes Beamforming (Coordinated Beamforming, CBF), dessen Loesung
sich in geschlossener Form angeben laesst. Dieser CBF-Algorithmus basiert
auf der SeDJoCo-Transformation und loest bisher vorhandene Probleme im
Bereich CBF. Im Anschluss schlagen wir einen iterativen CBF-Algorithmus
namens FlexCoBF (flexible coordinated beamforming) fuer
MIMO-Broadcast-Kanaele mit mehreren Nutzern vor. Im Vergleich mit bis dato
existierenden iterativen CBF-Algorithmen kann als vielversprechendster
Vorteil die freie Wahl der linearen Sende- und Empfangsstrategie
herausgestellt werden. Das heisst, jede existierende Methode der linearen
Vorkodierung kann als Sendestrategie genutzt werden, waehrend die Strategie
zum Empfangsbeamforming frei aus MRC oder MMSE gewaehlt werden darf. Im
Hinblick auf Szenarien, in denen Mobilfunkzellen in Clustern
zusammengefasst sind, erweitern wir FlexCoBF noch weiter. Hier wurde das
Konzept der koordinierten Mehrpunktverbindung (Coordinated Multipoint
(CoMP) transmission) integriert. Zuletzt stellen wir drei Moeglichkeiten
vor, Kanalzustandsinformationen (Channel State Information, CSI) unter
verschiedenen Kanalumstaenden zu erlangen. Die Qualitaet der
Kanalzustandsinformationen hat einen starken Einfluss auf die Guete des
Uebertragungssystems. Die durch unsere neuen Algorithmen erzielten
Verbesserungen haben wir mittels numerischer Simulationen von Summenraten
und Bitfehlerraten belegt.In order to combat interference and exploit large multiplexing gains of the
multi-antenna systems, a particular interest in spatial division multiple
access (SDMA) techniques has emerged. Linear precoding techniques, as one
of the SDMA strategies, have obtained more attention due to the fact that
an increasing number of users and antennas involved into the existing and
future mobile communication systems requires a simplification of the
precoding design. Therefore, this thesis contributes to the design of
linear transmit and receive strategies for multi-user MIMO broadcast
channels in a single cell and clustered multiple cells. First, we present a
throughput approximation framework for multi-user MIMO broadcast channels
employing regularized block diagonalization (RBD) linear precoding.
Comparing dirty paper coding (DPC) and linear precoding algorithms (e.g.,
zero forcing (ZF) and block diagonalization (BD)), we further quantify
lower and upper bounds of the rate and power offset between them as a
function of the system parameters such as the number of users and antennas.
Next, we develop a novel closed-form coordinated beamforming (CBF)
algorithm (i.e., SeDJoCo based closed-form CBF) to solve the existing open
problem of CBF. Our new algorithm can support a MIMO system with an
arbitrary number of users and transmit antennas. Moreover, the application
of our new algorithm is not only for CBF, but also for blind source
separation (BSS), since the same mathematical model has been used in BSS
application.Then, we further propose a new iterative CBF algorithm (i.e.,
flexible coordinated beamforming (FlexCoBF)) for multi-user MIMO broadcast
channels. Compared to the existing iterative CBF algorithms, the most
promising advantage of our new algorithm is that it provides freedom in the
choice of the linear transmit and receive beamforming strategies, i.e., any
existing linear precoding method can be chosen as the transmit strategy and
the receive beamforming strategy can be flexibly chosen from MRC or MMSE
receivers. Considering clustered multiple cell scenarios, we extend the
FlexCoBF algorithm further and introduce the concept of the coordinated
multipoint (CoMP) transmission. Finally, we present three strategies for
channel state information (CSI) acquisition regarding various channel
conditions and channel estimation strategies. The CSI knowledge is required
at the base station in order to implement SDMA techniques. The quality of
the obtained CSI heavily affects the system performance. The performance
enhancement achieved by our new strategies has been demonstrated by
numerical simulation results in terms of the system sum rate and the bit
error rate
Aumento de capacidade em sistemas MIMO coordenados para advanced LTE com utilização de repetidores fixos
Com vista a revolucionar o sector das comunicações móveis, muito à custa dos elevados débitos prometidos, a tecnologia LTE recorre a uma técnica que se prevê que seja bastante utilizada nas futuras redes de comunicações móveis: Relaying. Juntamente com esta técnica, o LTE recorre à técnica MIMO, para melhorar a qualidade da transmissão em ambientes hostis e oferecer elevados ritmos de transmissão.
No planeamento das próximas redes LTE, o recurso à técnica Relaying é frequente. Esta técnica, tem como objectivo aumentar a cobertura e/ou capacidade da rede, e ainda melhorar o seu desempenho em condições de fronteira de célula. A performance de uma RS depende da sua localização, das condições de propagação do canal rádio a que tanto a RS como o EU estão sujeitos, e ainda da capacidade que a RS tem de receber, processar e reencaminhar a informação.
O objectivo da tese é estudar a relação existente entre o posicionamento de uma RS e o seu desempenho. Desta forma, pretende-se concluir qual a posição ideal de uma RS (tanto do tipo AF como SDF). Para além deste estudo, é apresentado um comparativo do desempenho dos modos MIMO TD e OL-SM, onde se conclui em que condições deverão ser utilizados, numa rede LTE equipada com FRSs.With the aim of providing high data rates, the Long Term Evolution (LTE) standard makesuse of relaying as one of the important techniques for new mobile networks. LTE will alsomake use of the Multiple-Input Multiple-Output (MIMO) technique, to improve the transmission’s quality in hostile environments and to offer very high data rates.
The relay solution in mobile networks planning is a highly used technique in next LTEnetworks. This technique has the aim of increasing the network coverage and/or capacityand improves the cell edge throughput. The Relay Station (RS) performance depends on itsposition in the cell, the radio conditions to which the RS and the User Equipment (UE) are
subjected, and the RS capability to receive process and forward the information.
The aim of this thesis is to conclude about the optimized position in which a RS (fromtypes Amplify and Forward (AF)/ Selective Decode and Forward (SDF)) should be placed,with the aim of maximizing the UE throughput. Furthermore, to compare the performanceof Transmit Diversity (TD) versus Open-Loop Spatial Multiplexing (OL-SM) MIMO in LTE,and under which conditions they should be used, in a network equipped with Fixed RelayStations (FRSs)
Resource Allocation in Multi-user MIMO Networks: Interference Management and Cooperative Communications
Nowadays, wireless communications are becoming so tightly integrated in our daily lives, especially with the global spread of laptops, tablets and smartphones. This has paved the way to dramatically increasing wireless network dimensions in terms of subscribers and amount of flowing data. Therefore, the two important fundamental requirements for the future 5G wireless networks are abilities to support high data traffic and exceedingly low latency. A likely candidate to fulfill these requirements is multicell multi-user multi-input multiple-output (MU-MIMO); also termed as coordinated multi-point (CoMP) transmission and reception. To achieve the highest possible performance in MU-MIMO networks, a properly designed resource allocation algorithm is needed. Moreover, with the rapidly growing data traffic, interference has become a major limitation in wireless networks. Interference alignment (IA) has been shown to significantly manage the interference and improve the network performance. However, how practically use IA to mitigate interference in a downlink MU-MIMO network still remains an open problem. In this dissertation, we improve the performance of MU-MIMO networks in terms of spectral efficiency, by designing and developing new beamforming algorithms that can efficiently mitigate the interference and allocate the resources. Then we mathematically analyze the performance improvement of MUMIMO networks employing proposed techniques. Fundamental relationships between network parameters and the network performance is revealed, which provide guidance on the wireless networks design. Finally, system level simulations are conducted to investigate the performance of the proposed strategies