Active timing margin management to improve microprocessor power efficiency

Improving power/performance efficiency is critical for today’s micro- processors. From edge devices to datacenters, lower power or higher performance always produces better systems, measured by lower cost of ownership or longer battery time. This thesis studies improving microprocessor power/performance efficiency by optimizing the pipeline timing margin. In particular, this thesis focuses on improving the efficacy of Active Timing Margin, a young technology that dynamically adjusts the margin. Active timing margin trims down the pipeline timing margin with a control loop that adjusts voltage and frequency based on real-time chip environment monitoring. The key insight of this thesis is that in order to maximize active timing margin’s efficiency enhancement benefits, synergistic management from processor architecture design and system software scheduling are needed. To that end, this thesis covers the major consumers of pipeline timing margin, including temperature, voltage, and process variation. For temperature variation, the thesis proposes a table-lookup based active timing margin mechanism, and an associated temperature management scheme to minimize power consumption. For voltage variation, the thesis characterizes the limiting factors of adaptive clocking’s power saving and proposes application scheduling to maximize total system power reduction. For process variation, the thesis proposes core-level adaptive clocking reconfiguration to automatically expose inter-core variation and discusses workload scheduling and throttling management to control critical application performance. The author believes the optimization presented in this thesis can potentially benefit a variety of processor architectures as the conclusions are based on the solid measurement on state-of-the-art processors, and the research objective, active timing margin, already has wide applicability in the latest microprocessors by the time this thesis is written.Electrical and Computer Engineerin

Modeling industry 4.0 based fog computing environments for application analysis and deployment

The extension of the Cloud to the Edge of the network through Fog Computing can have a significant impact on the reliability and latencies of deployed applications. Recent papers have suggested a shift from VM and Container based deployments to a shared environment among applications to better utilize resources. Unfortunately, the existing deployment and optimization methods pay little attention to developing and identifying complete models to such systems which may cause large inaccuracies between simulated and physical run-time parameters. Existing models do not account for application interdependence or the locality of application resources which causes extra communication and processing delays. This paper addresses these issues by carrying out experiments in both cloud and edge systems with various scales and applications. It analyses the outcomes to derive a new reference model with data driven parameter formulations and representations to help understand the effect of migration on these systems. As a result, we can have a more complete characterization of the fog environment. This, together with tailored optimization methods than can handle the heterogeneity and scale of the fog can improve the overall system run-time parameters and improve constraint satisfaction. An Industry 4.0 based case study with different scenarios was used to analyze and validate the effectiveness of the proposed model. Tests were deployed on physical and virtual environments with different scales. The advantages of the model based optimization methods were validated in real physical environments. Based on these tests, we have found that our model is 90% accurate on load and delay predictions for application deployments in both cloud and edge

Post-Quantum Cryptography for Internet of Things: A Survey on Performance and Optimization

Due to recent development in quantum computing, the invention of a large quantum computer is no longer a distant future. Quantum computing severely threatens modern cryptography, as the hard mathematical problems beneath classic public-key cryptosystems can be solved easily by a sufficiently large quantum computer. As such, researchers have proposed PQC based on problems that even quantum computers cannot efficiently solve. Generally, post-quantum encryption and signatures can be hard to compute. This could potentially be a problem for IoT, which usually consist lightweight devices with limited computational power. In this paper, we survey existing literature on the performance for PQC in resource-constrained devices to understand the severeness of this problem. We also review recent proposals to optimize PQC algorithms for resource-constrained devices. Overall, we find that whilst PQC may be feasible for reasonably lightweight IoT, proposals for their optimization seem to lack standardization. As such, we suggest future research to seek coordination, in order to ensure an efficient and safe migration toward IoT for the post-quantum era.Comment: 13 pages, 3 figures and 7 tables. Formatted version submitted to ACM Computer Survey

System software techniques to enhance reliability of modern platforms

192

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Designing energy-efficient computing systems using equalization and machine learning

As technology scaling slows down in the nanometer CMOS regime and mobile computing becomes more ubiquitous, designing energy-efficient hardware for mobile systems is becoming increasingly critical and challenging. Although various approaches like near-threshold computing (NTC), aggressive voltage scaling with shadow latches, etc. have been proposed to get the most out of limited battery life, there is still no “silver bullet” to increasing power-performance demands of the mobile systems. Moreover, given that a mobile system could operate in a variety of environmental conditions, like different temperatures, have varying performance requirements, etc., there is a growing need for designing tunable/reconfigurable systems in order to achieve energy-efficient operation. In this work we propose to address the energy- efficiency problem of mobile systems using two different approaches: circuit tunability and distributed adaptive algorithms. Inspired by the communication systems, we developed feedback equalization based digital logic that changes the threshold of its gates based on the input pattern. We showed that feedback equalization in static complementary CMOS logic enabled up to 20% reduction in energy dissipation while maintaining the performance metrics. We also achieved 30% reduction in energy dissipation for pass-transistor digital logic (PTL) with equalization while maintaining performance. In addition, we proposed a mechanism that leverages feedback equalization techniques to achieve near optimal operation of static complementary CMOS logic blocks over the entire voltage range from near threshold supply voltage to nominal supply voltage. Using energy-delay product (EDP) as a metric we analyzed the use of the feedback equalizer as part of various sequential computational blocks. Our analysis shows that for near-threshold voltage operation, when equalization was used, we can improve the operating frequency by up to 30%, while the energy increase was less than 15%, with an overall EDP reduction of ≈10%. We also observe an EDP reduction of close to 5% across entire above-threshold voltage range. On the distributed adaptive algorithm front, we explored energy-efficient hardware implementation of machine learning algorithms. We proposed an adaptive classifier that leverages the wide variability in data complexity to enable energy-efficient data classification operations for mobile systems. Our approach takes advantage of varying classification hardness across data to dynamically allocate resources and improve energy efficiency. On average, our adaptive classifier is ≈100× more energy efficient but has ≈1% higher error rate than a complex radial basis function classifier and is ≈10× less energy efficient but has ≈40% lower error rate than a simple linear classifier across a wide range of classification data sets. We also developed a field of groves (FoG) implementation of random forests (RF) that achieves an accuracy comparable to Convolutional Neural Networks (CNN) and Support Vector Machines (SVM) under tight energy budgets. The FoG architecture takes advantage of the fact that in random forests a small portion of the weak classifiers (decision trees) might be sufficient to achieve high statistical performance. By dividing the random forest into smaller forests (Groves), and conditionally executing the rest of the forest, FoG is able to achieve much higher energy efficiency levels for comparable error rates. We also take advantage of the distributed nature of the FoG to achieve high level of parallelism. Our evaluation shows that at maximum achievable accuracies FoG consumes ≈1.48×, ≈24×, ≈2.5×, and ≈34.7× lower energy per classification compared to conventional RF, SVM-RBF , Multi-Layer Perceptron Network (MLP), and CNN, respectively. FoG is 6.5× less energy efficient than SVM-LR, but achieves 18% higher accuracy on average across all considered datasets