Future benefits and applications of intelligent on-board processing to VSAT services

The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified

Performance Improvements for FDDI and CSMA/CD Protocols

The High-Performance Computing Initiative from the White House Office of Science and Technology Policy has defined 20 major challenges in science and engineering which are dependent on the solutions to a number of high-performance computing problems. One of the major areas of focus of this initiative is the development of gigabit rate networks to be used in environments such as the space station or a National Research and Educational Network (NREN). The strategy here is to use existing network designs as building blocks for achieving higher rates, with the ultimate goal being a gigabit rate network. Two strategies which contribute to achieving this goal are examined in detail.1 FDDI2 is a token ring network based on fiber optics capable of a 100 Mbps rate. Both media access (MAC) and physical layer modifications are considered. A method is presented which allows one to determine maximum utilization based on the token-holding timer settings. Simulation results show that employing the second counter-rotating ring in combination with destination removal has a multiplicative effect greater than the effect which either of the factors have individually on performance. Two 100 Mbps rings can handle loads in the range of 400 to 500 Mbps for traffic with a uniform distribution and fixed packet size. Performance is dependent on the number of nodes, improving as the number increases. A wide range of environments are examined to illustrate robustness, and a method of implementation is discussed

Medium Access Control Layer Implementation on Field Programmable Gate Array Board for Wireless Networks

Triple play services are playing an important role in modern telecommunications systems. Nowadays, more researchers are engaged in investigating the most efficient approaches to integrate these services at a reduced level of operation costs. Field Programmable Gate Array (FPGA) boards have been found as the most suitable platform to test new protocols as they offer high levels of flexibility and customization. This thesis focuses on implementing a framework for the Triple Play Time Division Multiple Access (TP-TDMA) protocol using the Xilinx FPGA Virtex-5 board. This flexible framework design offers network systems engineers a reconfigiirable platform for triple-play systems development. In this work, MicorBlaze is used to perform memory and connectivity tests aiming to ensure the establishment of the connectivity as well as board’s processor stability. Two different approaches are followed to achieve TP-TDMA implementa­tion: systematic and conceptual. In the systematic approach, a bottom-to-top design is chosen where four subsystems are built with various components. Each component is then tested individually to investigate its response. On the other hand, the concep­tual approach is designed with only two components, in which one of them is created with the help of Xilinx Integrated Software Environment (ISE) Core Generator. The system is integrated and then tested to check its overall response. In summary, the work of this thesis is divided into three sections. The first section presents a testing method for Virtex-5 board using MicroBlaze soft processor. The following two sections concentrate on implementing the TP-TDMA protocol on the board by using two design approaches: one based on designing each component from scratch, while the other one focuses more on the system’s broader picture

Using the ethernet protocol for real-time communications in embedded systems

Doutoramento em Engenharia ElectrotécnicaOs Sistemas Computacionais de Controlo Distribuído (SCCD) estão muito disseminados em aplicações que vão desde o controlo de processos e manufactura a automóveis, aviões e robôs. Muitas aplicações são de natureza tempo-real, ou seja, impõem fortes restrições às propriedades subjacentes aos sistemas de controlo, gerando a necessidade de fornecer um comportamento temporal previsível durante períodos alargados de tempo. Em particular, dependendo da aplicação, uma falha em garantir as restrições pode causar importantes perdas económicas ou mesmo pôr vidas humanas em risco. Actualmente, a quantidade e funcionalidade dos modernos SCCD têm crescido firmemente. Esta evolução é motivada por uma nova classe de aplicações que requer maior demanda de recursos tais como aplicações de multimedia (por exemplo visão), bem como pela tendência em usar grande número de processadres simples e interconectados, em vez de poucos e poderosos processadores, encapsulando cada funcionalidade num único processador. Consequentemente, a quantidade de informação que deve ser trocada entre os nós da rede também cresceu drasticamente nos últimos anos e está agora atingindo os limites que podem ser obtidos por tradicionais barramentos de campo, como por exempo CAN, WorldFIP, PROFIBUS. Outras alternativas são pois requeridas para suportar a necessidade de largura de banda e a manutenção de exigências dos sistemas de comunicação tempo-real: previsibilidade, pontualidade, atraso e variação de período limitados. Uma das linhas de trabalho tem apostado na Ethernet, tirando vantagem dos baixos custos dos circuitos, da elevada largura de banda, da fácil integração com a Internet, e da simplicidade em promover expansões e compatibilidade com redes usadas na estrutura administrativa das empresas industriais. Porém, o mecanismo padronizado de acesso ao meio da Ethernet (CSMA/CD) é destrutivo e não determinístico, o que impede seu uso directo ao nível de campo ou pelo menos em aplicações de comunicação tempo-real. Apesar disso, muitas abordagens diferentes têm sido propostas e usadas para obter comportamento tempo-real em Ethernet. As abordagens actuais para dotar de comportamento tempo-real Ethernet partilhada apresentam desvantagens tais como: exigência de hardware especializado, fornecimento de garantias temporais estatísticas, ineficiência na utilização da largura de banda ou na reposta tempo-real. São ainda por vezes inflexíveis com respeito às propriedades de tráfego bem como com as políticas de escalonamento. Podem exigir processadores com elevado poder de cálculo. Finalmente não permitem que estações tempo-real possam coexistir com estações Ethernet standard no mesmo segmento. Uma proposta recente, o algoritmo hBEB, permite a coexistência de estações tempo-real e standard no mesmo segmento. Contudo, apenas uma estação tempo-real pode estar activa, o que é inaceitável para aplicações de automação e controlo. Esta tese discute uma nova solução para promover tempo-real em Ethernet partilhada, baseando-se na passagem implícita de testemunho de forma similar à usada pelo protocolo P-NET. Esta técnica é um mecanismo de acesso ao meio físico pouco exigente em termos de processamento, sendo portanto adequada para implementar uma rede de dispositivos baseados em processadores de baixo poder de cálculo e controladores Ethernet standard. Esta tese apresenta ainda uma proposta de implementação do VTPE em IP core para superar algumas dificuldades derivadas de funcionalidades que não são suportadas por controladores standard, nomeadamente a arbitragem do meio físico durante a transmissão de uma trama. Esta nova proposta pode aumentar muito a eficiência do VTPE no uso da largura de banda. O VTPE, assim como P-NET ou protocolos similares, permite a uma estação apenas comunicar uma vez por cada circulação do testemunho. Esta imposição pode causar bloqueios de comunicação por períodos inaceitáveis em aplicações com tráfego isócrono, por exemplo multimedia. Uma solução proposta permite que uma estação possa aceder ao meio físico mais de uma vez por cada circulação do token. Os resultados experimentais a as análises desenvolvidas mostram que o bloqueio pode ser drasticamente reduzido. Por último esta tese discute uma variante do protocolo VTPE, o VTPE/h- BEB, que permite que mais de uma estação hBEB possa coexistir com diversas estações Ethernet standard num mesmo segmento partilhado. Um demonstrador para prova de conceito bem como uma aplicação foram também implementados.Distributed Computer-Control Systems (DCCS) are widely disseminated in applications ranging from automation and control to automotive, avionics and robotics. Many of these applications are real-time, posing stringent constraints to the properties of underlying control systems, which arise from the need to provide predictable behaviour during extended time periods. Depending on the particular type of application, a failure to meet these constraints can cause important economic losses or can even put human life in risk. Currently the number and functionality of modern DCCSs have been increasing steadily. This evolution has been motivated for a new class of applications of more resource demanding applications, such as multimedia (e.g. machine vision), as well as by the trend to use large numbers of simple interconnected processors, instead of a few powerful ones, encapsulating each functionality in one single processor. Consequently, the amount of information that must be exchanged among the network nodes has also increased dramatically and is now reaching the limits achievable by traditional fieldbuses. Therefore, other alternatives are required to support higher bandwidth demands while keeping the main requirements of a real-time communication system: predictability, timeliness, bounded delays and jitter. Efforts have been made with Ethernet to take advantage of the low cost of the silicon, high bandwidth, easy integration with the Internet, easy expansion and compatibility with the networks used at higher layers in the factory structure. However its standardized media access control (CSMA/CD) is destructive and not deterministic, impairing its direct use at field level at least for real-time communication. Despite this, many solutions have been proposed to achieve real-time behavior in Ethernet. However they present several disadvantages: requiring specialized hardware, providing statistical timeliness guarantees only, being bandwidth or response-time inefficient, being inflexible concerning traffic properties and/or scheduling policy, or finally not allowing real-time stations to coexist with standard Ethernet stations in the same segment. A recent proposal, the hBEB algorithm, allows the coexistence of real-time and standard Ethernet stations in the same shared segment. However hBEB limits at most one real-time station per segment which is unacceptable for applications in industrial automation and process control. This thesis discusses a new real-time shared Ethernet solution based on the virtual token passing technique similarly to the one used by the P-NET protocol. This technique is a medium access control mechanism that requires small processing power, being suitable to implement devices based on processors with small processing power. The solution is called Virtual Token Passing Ethernet or VTPE. This proposal discusses the modifications required in the Ethernet frame format, the temporal analysis to guarantee real-time communication and the implementation of two demonstrators based on microcontrollers and standard Ethernet controllers. This thesis also presents a proposal to implement VTPE in an IP Core to overcome some difficulties derived from limitations of standard Ethernet controllers, namely to allow medium access control during a frame transmission. This proposal can increase the bandwidth efficiency of VTPE. VTPE, as well as P-NET or any other protocol based on circular token rotation technique, only allows a station to communicate once for each token round. This design imposition can cause unacceptable communication blocking in applications with isochronous traffic such as multimedia. An improvement in the VTPE proposal enables a station to access the medium more than once per token round. The experimental results as well as the temporal analysis show that the blocking can be drastically reduced. This improvement can also be used in the P-NET protocol. Finally this thesis proposes a variant of VTPE, named VTPE/hBEB, to be implemented in Ethernet controllers that are able to support the hBEB algorithm. The VTPE/hBEB allows more than one hBEB station to coexist with several standard Ethernet stations in the same shared Ethernet segment. A demonstrator for the VTPE/hBEB validation, as well as an application, are also presented and discussed

Fiber optic networks: fairness, access controls and prototyping

Fiber optic technologies enabling high-speed, high-capacity digital information transport have only been around for about 3 decades but in their short life have completely revolutionized global communications. To keep pace with the growing demand for digital communications and entertainment, fiber optic networks and technologies continue to grow and mature. As new applications in telecommunications, computer networking and entertainment emerge, reliability, scalability, and high Quality of Service (QoS) requirements are increasing the complexity of optical transport networks.;This dissertation is devoted to providing a discussion of existing and emerging technologies in modern optical communications networks. To this end, we first outline traditional telecommunication and data networks that enable high speed, long distance information transport. We examine various network architectures including mesh, ring and bus topologies of modern Local, Metropolitan and Wide area networks. We present some of the most successful technologies used in todays communications networks, outline their shortcomings and introduce promising new technologies to meet the demands of future transport networks.;The capacity of a single wavelength optical signal is 10 Gbps today and is likely to increase to over 100 Gbps as demonstrated in laboratory settings. In addition, Wavelength Division Multiplexing (WDM) techniques, able to support over 160 wavelengths on a single optical fiber, have effectively increased the capacity of a single optical fiber to well over 1 Tbps. However, user requirements are often of a sub-wavelength order. This mis-match between individual user requirements and single wavelength offerings necessitates bandwidth sharing mechanisms to efficiently multiplex multiple low rate streams on to high rate wavelength channels, called traffic grooming.;This dissertation examines traffic grooming in the context of circuit, packet, burst and trail switching paradigms. Of primary interest are the Media Access Control (MAC) protocols used to provide QoS and fairness in optical networks. We present a comprehensive discussion of the most recognized fairness models and MACs for ring and bus networks which lay the groundwork for the development of the Robust, Dynamic and Fair Network (RDFN) protocol for ring networks. The RDFN protocol is a novel solution to fairly share ring bandwidth for bursty asynchronous data traffic while providing bandwidth and delay guarantees for synchronous voice traffic.;We explain the light-trail (LT) architecture and technology introduced in [37] as a solution to providing high network resource utilization, seamless scalability and network transparency for metropolitan area networks. The goal of light-trails is to eliminate Optical Electronic Optical (O-E-O) conversion, minimize active switching, maximize wavelength utilization, and offer protocol and bit-rate transparency to address the growing demands placed on WDM networks. Light-trail technology is a physical layer architecture that combines commercially available optical components to allow multiple nodes along a lightpath to participate in time multiplexed communication without the need for burst or packet level switch reconfiguration. We present three medium access control protocols for light-trails that provide collision protection but do not consider fair network access. As an improvement to these light-trail MAC protocols we introduce the Token LT and light-trail Fair Access (LT-FA) MAC protocols and evaluate their performance. We illustrate how fairness is achieved and access delay guarantees are made to satisfy the bandwidth budget fairness model. The goal of light-trails and our access control solution is to combine commercially available components with emerging network technologies to provide a transparent, reliable and highly scalable communication network.;The second area of discussion in this dissertation deals with the rapid prototyping platform. We discuss how the reconfigurable rapid prototyping platform (RRPP) is being utilized to bridge the gap between academic research, education and industry. We provide details of the Real-time Radon transform and the Griffin parallel computing platform implemented using the RRPP. We discuss how the RRPP provides additional visibility to academic research initiatives and facilitates understanding of system level designs. As a proof of concept, we introduce the light-trail testbed developed at the High Speed Systems Engineering lab. We discuss how a light-trail test bed has been developed using the RRPP to provide additional insight on the real-world limitations of light-trail technology. We provide details on its operation and discuss the steps required to and decisions made to realize test-bed operation. Two applications are presented to illustrate the use of the LT-FA MAC in the test-bed and demonstrate streaming media over light-trails.;As a whole, this dissertation aims to provide a comprehensive discussion of current and future technologies and trends for optical communication networks. In addition, we provide media access control solutions for ring and bus networks to address fair resource sharing and access delay guarantees. The light-trail testbed demonstrates proof of concept and outlines system level design challenges for future optical networks

Medium access control mechanisms for high speed metropolitan area networks

In this dissertation novel Medium Access Control mechanisms for High Speed Metropolitan Area networks are proposed and their performance is investigated under the presence of single and multiple priority classes of traffic. The proposed mechanisms are based on the Distributed Queue Dual Bus network, which has been adopted by the IEEE standardization committee as the 802.6 standard for Metropolitan Area Networks, and address most of its performance limitations. First, the Rotating Slot Generator scheme is introduced which uses the looped bus architecture that has been proposed for the 802.6 network. According to this scheme the responsibility for generating slots moves periodically from station to station around the loop. In this way, the positions of the stations relative to the slot generator change continuously, and therefore, there are no favorable locations on the busses. Then, two variations of a new bandwidth balancing mechanism, the NSW_BWB and ITU_NSW are introduced. Their main advantage is that their operation does not require the wastage of channel slots and for this reason they can converge very fast to the steady state, where the fair bandwidth allocation is achieved. Their performance and their ability to support multiple priority classes of traffic are thoroughly investigated. Analytic estimates for the stations\u27 throughputs and average segment delays are provided. Moreover, a novel, very effective priority mechanism is introduced which can guarantee almost immediate access for high priority traffic, regardless of the presence of lower priority traffic. Its performance is thoroughly investigated and its ability to support real time traffic, such as voice and video, is demonstrated. Finally, the performance under the presence of erasure nodes of the various mechanisms that have been proposed in this dissertation is examined and compared to the corresponding performance of the most prominent existing mechanisms

A Novel Approach to Pci Simulation Using ScriptSim

In recent years, the Peripheral Component Interconnect (PCI) has become one of the most widely used bus architectures in modern computers. Simulation of the PCI bus, however, has been limited in both research and development. Current commercial PCI simulation software is designed towards compliance and verification testing rather than accurately mimicking PCI bus systems. In addition, most PCI simulation software is inflexible and offers no graphical user interface, instead relying on text files for configuration. This paper presents a novel approach to PCI simulation using ScriptSim, an open-source PCI simulation tool that supports all the features offered by the PCI Local Specification Version 2.2. In addition to extending ScriptSim to include PCI-X functionality and a web-based graphical interface, we introduce techniques that allow us to accurately simulate real-world systems

Technology Directions for the 21st Century

New technologies will unleash the huge capacity of fiber-optic cable to meet growing demands for bandwidth. Companies will continue to replace private networks with public network bandwidth-on-demand. Although asynchronous transfer mode (ATM) is the transmission technology favored by many, its penetration will be slower than anticipated. Hybrid networks - e.g., a mix of ATM, frame relay, and fast Ethernet - may predominate, both as interim and long-term solutions, based on factors such as availability, interoperability, and cost. Telecommunications equipment and services prices will decrease further due to increased supply and more competition. Explosive Internet growth will continue, requiring additional backbone transmission capacity and enhanced protocols, but it is not clear who will fund the upgrade. Within ten years, space-based constellations of satellites in Low Earth orbit (LEO) will serve mobile users employing small, low-power terminals. 'Little LEO's' will provide packet transmission services and geo-position determination. 'Big LEO's' will function as global cellular telephone networks, with some planning to offer video and interactive multimedia services. Geosynchronous satellites also are proposed for mobile voice grade links and high-bandwidth services. NASA may benefit from resulting cost reductions in components, space hardware, launch services, and telecommunications services

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

On Energy Efficient Computing Platforms

In accordance with the Moore's law, the increasing number of on-chip integrated transistors has enabled modern computing platforms with not only higher processing power but also more affordable prices. As a result, these platforms, including portable devices, work stations and data centres, are becoming an inevitable part of the human society. However, with the demand for portability and raising cost of power, energy efficiency has emerged to be a major concern for modern computing platforms. As the complexity of on-chip systems increases, Network-on-Chip (NoC) has been proved as an efficient communication architecture which can further improve system performances and scalability while reducing the design cost. Therefore, in this thesis, we study and propose energy optimization approaches based on NoC architecture, with special focuses on the following aspects. As the architectural trend of future computing platforms, 3D systems have many bene ts including higher integration density, smaller footprint, heterogeneous integration, etc. Moreover, 3D technology can signi cantly improve the network communication and effectively avoid long wirings, and therefore, provide higher system performance and energy efficiency. With the dynamic nature of on-chip communication in large scale NoC based systems, run-time system optimization is of crucial importance in order to achieve higher system reliability and essentially energy efficiency. In this thesis, we propose an agent based system design approach where agents are on-chip components which monitor and control system parameters such as supply voltage, operating frequency, etc. With this approach, we have analysed the implementation alternatives for dynamic voltage and frequency scaling and power gating techniques at different granularity, which reduce both dynamic and leakage energy consumption. Topologies, being one of the key factors for NoCs, are also explored for energy saving purpose. A Honeycomb NoC architecture is proposed in this thesis with turn-model based deadlock-free routing algorithms. Our analysis and simulation based evaluation show that Honeycomb NoCs outperform their Mesh based counterparts in terms of network cost, system performance as well as energy efficiency.Siirretty Doriast