1,333 research outputs found
Modeling and inverse feedforward control for conducting polymer actuators with hysteresis
Conducting polymer actuators are biocompatible with a small footprint, and operate in air or liquid media under low actuation voltages. This makes them excellent actuators for macro- and micro-manipulation devices, however, their positioning ability or accuracy is adversely affected by their hysteresis non-linearity under open-loop control strategies. In this paper, we establish a hysteresis model for conducting polymer actuators, based on a rate-independent hysteresis model known as the Duhem model. The hysteresis model is experimentally identified and integrated with the linear dynamics of the actuator. This combined model is inverted to control the displacement of the tri-layer actuators considered in this study, without using any external feedback. The inversion requires an inverse hysteresis model which was experimentally identified using an inverse neural network model. Experimental results show that the position tracking errors are reduced by more than 50% when the hysteresis inverse model is incorporated into an inversion-based feedforward controller, indicating the potential of the proposed method in enabling wider use of such smart actuators
Use of multilayer feedforward neural networks in identification and control of Wiener model
Includes bibliographical references (page 258).The problem of identification and control of a Wiener model is studied. The proposed identification model uses a hybrid model consisting of a linear autoregressive moving average model in cascade with a multilayer feed forward neural network. A two-step procedure is proposed to estimate the linear and nonlinear parts separately. Control of the Wiener model can be achieved by inserting the inverse of the static nonlinearity in the appropriate loop locations. Simulation results illustrate the performance of the proposed method
Medical imaging analysis with artificial neural networks
Given that neural networks have been widely reported in the research community of medical imaging, we provide a focused literature survey on recent neural network developments in computer-aided diagnosis, medical image segmentation and edge detection towards visual content analysis, and medical image registration for its pre-processing and post-processing, with the aims of increasing awareness of how neural networks can be applied to these areas and to provide a foundation for further research and practical development. Representative techniques and algorithms are explained in detail to provide inspiring examples illustrating: (i) how a known neural network with fixed structure and training procedure could be applied to resolve a medical imaging problem; (ii) how medical images could be analysed, processed, and characterised by neural networks; and (iii) how neural networks could be expanded further to resolve problems relevant to medical imaging. In the concluding section, a highlight of comparisons among many neural network applications is included to provide a global view on computational intelligence with neural networks in medical imaging
Neural networks in control engineering
The purpose of this thesis is to investigate the viability of integrating neural networks into control structures. These networks are an attempt to create artificial intelligent systems with the ability to learn and remember. They mathematically model the biological structure of the brain and consist of a large number of simple interconnected processing units emulating brain cells. Due to the highly parallel and consequently computationally expensive nature of these networks, intensive research in this field has only become feasible due to the availability of powerful personal computers in recent years. Consequently, attempts at exploiting the attractive learning and nonlinear optimization characteristics of neural networks have been made in most fields of science and engineering, including process control. The control structures suggested in the literature for the inclusion of neural networks in control applications can be divided into four major classes. The first class includes approaches in which the network forms part of an adaptive mechanism which modulates the structure or parameters of the controller. In the second class the network forms part of the control loop and replaces the conventional control block, thus leading to a pure neural network control law. The third class consists of topologies in which neural networks are used to produce models of the system which are then utilized in the control structure, whilst the fourth category includes suggestions which are specific to the problem or system structure and not suitable for a generic neural network-based-approach to control problems. Although several of these approaches show promising results, only model based structures are evaluated in this thesis. This is due to the fact that many of the topologies in other classes require system estimation to produce the desired network output during training, whereas the training data for network models is obtained directly by sampling the system input(s) and output(s). Furthermore, many suggested structures lack the mathematical motivation to consider them for a general structure, whilst the neural network model topologies form natural extensions of their linear model based origins. Since it is impractical and often impossible to collect sufficient training data prior to implementing the neural network based control structure, the network models have to be suited to on-line training during operation. This limits the choice of network topologies for models to those that can be trained on a sample by sample basis (pattern learning) and furthermore are capable of learning even when the variation in training data is relatively slow as is the case for most controlled dynamic systems. A study of feedforward topologies (one of the main classes of networks) shows that the multilayer perceptron network with its backpropagation training is well suited to model nonlinear mappings but fails to learn and generalize when subjected to slow varying training data. This is due to the global input interpretation of this structure, in which any input affects all hidden nodes such that no effective partitioning of the input space can be achieved. This problem is overcome in a less flexible feedforward structure, known as regular Gaussian network. In this network, the response of each hidden node is limited to a -sphere around its center and these centers are fixed in a uniform distribution over the entire input space. Each input to such a network is therefore interpreted locally and only effects nodes with their centers in close proximity. A deficiency common to all feedforward networks, when considered as models for dynamic systems, is their inability to conserve previous outputs and states for future predictions. Since this absence of dynamic capability requires the user to identify the order of the system prior to training and is therefore not entirely self-learning, more advanced network topologies are investigated. The most versatile of these structures, known as a fully recurrent network, re-uses the previous state of each of its nodes for subsequent outputs. However, despite its superior modelling capability, the tests performed using the Williams and Zipser training algorithm show that such structures often fail to converge and require excessive computing power and time, when increased in size. Despite its rigid structure and lack of dynamic capability, the regular Gaussian network produces the most reliable and robust models and was therefore selected for the evaluations in this study. To overcome the network initialization problem, found when using a pure neural network model, a combination structure· _in which the network operates in parallel with a mathematical model is suggested. This approach allows the controller to be implemented without any prior network training and initially relies purely on the mathematical model, much like conventional approaches. The network portion is then trained during on-line operation in order to improve the model. Once trained, the enhanced model can be used to improve the system response, since model exactness plays an important role in the control action achievable with model based structures. The applicability of control structures based on neural network models is evaluated by comparing the performance of two network approaches to that of a linear structure, using a simulation of a nonlinear tank system. The first network controller is developed from the internal model control (IMC) structure, which includes a forward and inverse model of the system to be controlled. Both models can be replaced by a combination of mathematical and neural topologies, the network portion of which is trained on-line to compensate for the discrepancies between the linear model _ and nonlinear system. Since the network has no dynamic ·capacity, .former system outputs are used as inputs to the forward and inverse model. Due to this direct feedback, the trained structure can be tuned to perform within limits not achievable using a conventional linear system. As mentioned previously the IMC structure uses both forward and inverse models. Since the control law requires that these models are exact inverses, an iterative inversion algorithm has to be used to improve the values produced by the inverse combination model. Due to deadtimes and right-half-plane zeroes, many systems are furthermore not directly invertible. Whilst such unstable elements can be removed from mathematical models, the inverse network is trained directly from the forward model and can not be compensated. These problems could be overcome by a control structure for which only a forward model is required. The neural predictive controller (NPC) presents such a topology. Based on the optimal control philosophy, this structure uses a model to predict several future outputs. The errors between these and the desired output are then collected to form the cost function, which may also include other factors such as the magnitude of the change in input. The input value that optimally fulfils all the objectives used to formulate the cost function, can then be found by locating its minimum. Since the model in this structure includes a neural network, the optimization can not be formulated in a closed mathematical form and has to be performed using a numerical method. For the NPC topology, as for the neural network IMC structure, former system outputs are fed back to the model and again the trained network approach produces results not achievable with a linear model. Due to the single network approach, the NPC topology furthermore overcomes the limitations described for the neural network IMC structure and can be extended to include multivariable systems. This study shows that the nonlinear modelling capability of neural networks can be exploited to produce learning control structures with improved responses for nonlinear systems. Many of the difficulties described are due to the computational burden of these networks and associated algorithms. These are likely to become less significant due to the rapid development in computer technology and advances in neural network hardware. Although neural network based control structures are unlikely to replace the well understood linear topologies, which are adequate for the majority of applications, they might present a practical alternative where (due to nonlinearity or modelling errors) the conventional controller can not achieve the required control action
Harnessing machine learning for fiber-induced nonlinearity mitigation in long-haul coherent optical OFDM
© 2018 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).Coherent optical orthogonal frequency division multiplexing (CO-OFDM) has attracted a lot of interest in optical fiber communications due to its simplified digital signal processing (DSP) units, high spectral-efficiency, flexibility, and tolerance to linear impairments. However, CO-OFDM’s high peak-to-average power ratio imposes high vulnerability to fiber-induced non-linearities. DSP-based machine learning has been considered as a promising approach for fiber non-linearity compensation without sacrificing computational complexity. In this paper, we review the existing machine learning approaches for CO-OFDM in a common framework and review the progress in this area with a focus on practical aspects and comparison with benchmark DSP solutions.Peer reviewe
Physics-Guided Neural Networks for Inversion-based Feedforward Control applied to Linear Motors
Ever-increasing throughput specifications in semiconductor manufacturing
require operating high-precision mechatronics, such as linear motors, at higher
accelerations. In turn this creates higher nonlinear parasitic forces that
cannot be handled by industrial feedforward controllers. Motivated by this
problem, in this paper we develop a general framework for inversion-based
feedforward controller design using physics-guided neural networks (PGNNs). In
contrast with black-box neural networks, the developed PGNNs embed prior
physical knowledge in the input and hidden layers, which results in improved
training convergence and learning of underlying physical laws. The PGNN
inversion-based feedforward control framework is validated in simulation on an
industrial linear motor, for which it achieves a mean average tracking error
twenty times smaller than mass-acceleration feedforward in simulation.Comment: Submitted to 2021 IEEE Conference on Control Technology and
Application
Ecological models at fish community and species level to support effective river restoration
RESUMEN
Los peces nativos son indicadores de la salud de los ecosistemas acuáticos, y se han
convertido en un elemento de calidad clave para evaluar el estado ecológico de los rÃos. La
comprensión de los factores que afectan a las especies nativas de peces es importante para la
gestión y conservación de los ecosistemas acuáticos. El objetivo general de esta tesis es analizar
las relaciones entre variables biológicas y de hábitat (incluyendo la conectividad) a través de
una variedad de escalas espaciales en los rÃos Mediterráneos, con el desarrollo de herramientas
de modelación para apoyar la toma de decisiones en la restauración de rÃos.
Esta tesis se compone de cuatro artÃculos. El primero tiene como objetivos modelar la
relación entre un conjunto de variables ambientales y la riqueza de especies nativas (NFSR), y
evaluar la eficacia de potenciales acciones de restauración para mejorar la NFSR en la cuenca
del rÃo Júcar. Para ello se aplicó un enfoque de modelación de red neuronal artificial (ANN),
utilizando en la fase de entrenamiento el algoritmo Levenberg-Marquardt. Se aplicó el método
de las derivadas parciales para determinar la importancia relativa de las variables ambientales.
Según los resultados, el modelo de ANN combina variables que describen la calidad de ribera,
la calidad del agua y el hábitat fÃsico, y ayudó a identificar los principales factores que
condicionan el patrón de distribución de la NFSR en los rÃos Mediterráneos. En la segunda parte
del estudio, el modelo fue utilizado para evaluar la eficacia de dos acciones de restauración en el
rÃo Júcar: la eliminación de dos azudes abandonados, con el consiguiente incremento de la
proporción de corrientes. Estas simulaciones indican que la riqueza aumenta con el incremento
de la longitud libre de barreras artificiales y la proporción del mesohabitat de corriente, y
demostró la utilidad de las ANN como una poderosa herramienta para apoyar la toma de
decisiones en el manejo y restauración ecológica de los rÃos Mediterráneos.
El segundo artÃculo tiene como objetivo determinar la importancia relativa de los dos
principales factores que controlan la reducción de la riqueza de peces (NFSR), es decir, las
interacciones entre las especies acuáticas, variables del hábitat (incluyendo la conectividad
fluvial) y biológicas (incluidas las especies invasoras) en los rÃos Júcar, Cabriel y Turia. Con
este fin, tres modelos de ANN fueron analizados: el primero fue construido solamente con
variables biológicas, el segundo se construyó únicamente con variables de hábitat y el tercero
con la combinación de estos dos grupos de variables. Los resultados muestran que las variables
de hábitat son los ¿drivers¿ más importantes para la distribución de NFSR, y demuestran la
importancia ecológica de los modelos desarrollados. Los resultados de este estudio destacan la
necesidad de proponer medidas de mitigación relacionadas con la mejora del hábitat
(incluyendo la variabilidad de caudales en el rÃo) como medida para conservar y restaurar los
rÃos Mediterráneos.
El tercer artÃculo busca comparar la fiabilidad y relevancia ecológica de dos modelos
predictivos de NFSR, basados en redes neuronales artificiales (ANN) y random forests (RF). La
relevancia de las variables seleccionadas por cada modelo se evaluó a partir del conocimiento
ecológico y apoyado por otras investigaciones. Los dos modelos fueron desarrollados utilizando
validación cruzada k-fold y su desempeño fue evaluado a través de tres Ãndices: el coeficiente de determinación (R2
), el error cuadrático medio (MSE) y el coeficiente de determinación ajustado
(R2
adj). Según los resultados, RF obtuvo el mejor desempeño en entrenamiento. Pero, el
procedimiento de validación cruzada reveló que ambas técnicas generaron resultados similares
(R2
= 68% para RF y R2
= 66% para ANN). La comparación de diferentes métodos de machine
learning es muy útil para el análisis crÃtico de los resultados obtenidos a través de los modelos.
El cuarto artÃculo tiene como objetivo evaluar la capacidad de las ANN para identificar los
factores que afectan a la densidad y la presencia/ausencia de Luciobarbus guiraonis en la
demarcación hidrográfica del Júcar. Se utilizó una red neuronal artificial multicapa de tipo feedforward (ANN) para representar relaciones no lineales entre descriptores de L. guiraonis con
variables biológicas y de hábitat. El poder predictivo de los modelos se evaluó con base en el
Ãndice Kappa (k), la proporción de casos correctamente clasificados (CCI) y el área bajo la curva
(AUC) caracterÃstica operativa del receptor (ROC). La presencia/ausencia de L. guiraonis fue
bien predicha por el modelo ANN (CCI = 87%, AUC = 0.85 y k = 0.66). La predicción de la
densidad fue moderada (CCI = 62%, AUC = 0.71 y k = 0.43). Las variables más importantes
que describen la presencia/ausencia fueron: radiación solar, área de drenaje y la proporción de
especies exóticas de peces con un peso relativo del 27.8%, 24.53% y 13.60% respectivamente.
En el modelo de densidad, las variables más importantes fueron el coeficiente de variación de
los caudales medios anuales con una importancia relativa del 50.5% y la proporción de especies
exóticas de peces con el 24.4%. Los modelos proporcionan información importante acerca de la
relación de L. guiraonis con variables bióticas y de hábitat, este nuevo conocimiento podrÃa
utilizarse para apoyar futuros estudios y para contribuir en la toma de decisiones para la
conservación y manejo de especies en los en los rÃos Júcar, Cabriel y Turia.Olaya MarÃn, EJ. (2013). Ecological models at fish community and species level to support effective river restoration [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/28853TESI
- …