Configurable and Scalable Turbo Decoder for 4G Wireless Receivers

The increasing requirements of high data rates and quality of service (QoS) in fourth-generation (4G) wireless communication require the implementation of practical capacity approaching codes. In this chapter, the application of Turbo coding schemes that have recently been adopted in the IEEE 802.16e WiMax standard and 3GPP Long Term Evolution (LTE) standard are reviewed. In order to process several 4G wireless standards with a common hardware module, a reconfigurable and scalable Turbo decoder architecture is presented. A parallel Turbo decoding scheme with scalable parallelism tailored to the target throughput is applied to support high data rates in 4G applications. High-level decoding parallelism is achieved by employing contention-free interleavers. A multi-banked memory structure and routing network among memories and MAP decoders are designed to operate at full speed with parallel interleavers. A new on-line address generation technique is introduced to support multiple Turbo interleaving patterns, which avoids the interleaver address memory that is typically necessary in the traditional designs. Design trade-offs in terms of area and power efficiency are analyzed for different parallelism and clock frequency goals

Efficient FPGA Implementation of a CTC Turbo Decoder for WiMAX/LTE Mobile Systems

This chapter describes the implementation on field programmable gate array (FPGA) of a turbo decoder for 3GPP long-term evolution (LTE) standard, respectively, for IEEE 802.16-based WiMAX systems. We initially present the serial decoding architectures for the two systems. The same approach is used; although for WiMAX the scheme implements a duo-binary code, while for LTE a binary code is included. The proposed LTE serial decoding scheme is adapted for parallel transformation. Then, considering the LTE high throughput requirements, a parallel decoding solution is proposed. Considering a parallelization with N = 2p levels, the parallel approach reduces the decoding latency N times versus the serial decoding one. For parallel approach the decoding performance suffers a small degradation, but we propose a solution that almost eliminates this degradation, by performing an overlapped data block split. Moreover, considering the native properties of the LTE quadratic permutation polynomial (QPP) interleaver, we propose a simplified parallel decoder architecture. The novelty of this scheme is that only one interleaver module is used, no matter the value of N, by introducing an even-odd merge sorting network. We propose for it a recursive approach that uses only comparators and subtractors

Reducing the memory for iteration-exchanged information and border future metrics in the HomePlug AV turbo decoder implementation

HomePlug AV is the most successful standard for in home power line communications. To combat non-ideality of the power line channel it includes a double binary turbo forward error correcting scheme. Unfortunately, it is known that the memory required by double binary turbo decoders for iteration-exchanged information is roughly three times the memory required for binary turbo codes. Moreover, high throughput implementations based on border state metric inheritance, require additional memories to store border state metrics from an iteration to the next one. This work faces these two aspects by analyzing compression techniques to reduce the amount of memory required to store both iteration-exchanged information and border future metrics. Experimental simulations show that non-uniform quantization and least significant bits dropping allow for a significant memory reduction (up to 30%) with a bit error rate performance loss of about 0.1 dB and a negligible logic gates overhead

A Programmable, Scalable-Throughput Interleaver

The interleaver stages of digital communication standards show a surprisingly large variation in throughput, state sizes, and permutation functions. Furthermore, data rates for 4G standards such as LTE-Advanced will exceed typical baseband clock frequencies of handheld devices. Multistream operation for Software Defined Radio and iterative decoding algorithms will call for ever higher interleave data rates. Our interleave machine is built around 8 single-port SRAM banks and can be programmed to generate up to 8 addresses every clock cycle. The scalable architecture combines SIMD and VLIW concepts with an efficient resolution of bank conflicts. A wide range of cellular, connectivity, and broadcast interleavers have been mapped on this machine, with throughputs up to more than 0.5 Gsymbol/second. Although it was designed for channel interleaving, the application domain of the interleaver extends also to Turbo interleaving. The presented configuration of the architecture is designed as a part of a programmable outer receiver on a prototype board. It offers (near) universal programmability to enable the implementation of new interleavers. The interleaver measures 2.09 mm2 in 65 nm CMOS (including memories) and proves functional on silicon

On chip interconnects for multiprocessor turbo decoding architectures

International audienc

The modified Max-Log-MAP turbo decoding algorithm by extrinsic information scaling for wireless applications

The iterative nature of turbo-decoding algorithms increases their complexity compare to conventional FEC decoding algorithms. Two iterative decoding algorithms, Soft-Output-Viterbi Algorithm (SOVA) and Maximum A posteriori Probability (MAP) Algorithm require complex decoding operations over several iteration cycles. So, for real-time implementation of turbo codes, reducing the decoder complexity while preserving bit-error-rate (BER) performance is an important design consideration. In this chapter, a modification to the Max-Log-MAP algorithm is presented. This modification is to scale the extrinsic information exchange between the constituent decoders. The remainder of this chapter is organized as follows: An overview of the turbo encoding and decoding processes, the MAP algorithm and its simplified versions the Log-MAP and Max-Log-MAP algorithms are presented in section 1. The extrinsic information scaling is introduced, simulation results are presented, and the performance of different methods to choose the best scaling factor is discussed in Section 2. Section 3 discusses trends and applications of turbo coding from the perspective of wireless applications

Information-Coupled Turbo Codes for LTE Systems

We propose a new class of information-coupled (IC) Turbo codes to improve the transport block (TB) error rate performance for long-term evolution (LTE) systems, while keeping the hybrid automatic repeat request protocol and the Turbo decoder for each code block (CB) unchanged. In the proposed codes, every two consecutive CBs in a TB are coupled together by sharing a few common information bits. We propose a feed-forward and feed-back decoding scheme and a windowed (WD) decoding scheme for decoding the whole TB by exploiting the coupled information between CBs. Both decoding schemes achieve a considerable signal-to-noise-ratio (SNR) gain compared to the LTE Turbo codes. We construct the extrinsic information transfer (EXIT) functions for the LTE Turbo codes and our proposed IC Turbo codes from the EXIT functions of underlying convolutional codes. An SNR gain upper bound of our proposed codes over the LTE Turbo codes is derived and calculated by the constructed EXIT charts. Numerical results show that the proposed codes achieve an SNR gain of 0.25 dB to 0.72 dB for various code parameters at a TB error rate level of $10^{-2}$, which complies with the derived SNR gain upper bound.Comment: 13 pages, 12 figure