Integration of decision support systems to improve decision support performance

Decision support system (DSS) is a well-established research and development area. Traditional isolated, stand-alone DSS has been recently facing new challenges. In order to improve the performance of DSS to meet the challenges, research has been actively carried out to develop integrated decision support systems (IDSS). This paper reviews the current research efforts with regard to the development of IDSS. The focus of the paper is on the integration aspect for IDSS through multiple perspectives, and the technologies that support this integration. More than 100 papers and software systems are discussed. Current research efforts and the development status of IDSS are explained, compared and classified. In addition, future trends and challenges in integration are outlined. The paper concludes that by addressing integration, better support will be provided to decision makers, with the expectation of both better decisions and improved decision making processes

A Capacity Planning Simulation Model for Reconfigurable Manufacturing Systems

Important objectives and challenges in today’s manufacturing environment include the introduction of new products and the designing and developing of reconfigurable manufacturing systems. The objective of this research is to investigate and support the reconfigurability of a manufacturing system in terms of scalability by applying a discrete-event simulation modelling technique integrated with flexible capacity control functions and communication rules for re-scaling process. Moreover, the possible extension of integrating the discrete-event simulation with an agent-based model is presented as a framework. The benefits of this framework are collaborative decision making using agents for flexible reaction to system changes and system performance improvement. AnyLogic multi-method simulation modelling platform is utilized to design and create different simulation modelling scenarios. The developed capacity planning simulation model results are demonstrated in terms of a case study using the configurable assembly Learning Factory (iFactory) in the Intelligent Manufacturing Systems (IMS) Center at the University of Windsor. The main benefit of developed capacity planning simulation in comparison to traditional discrete-event simulation is, with a single simulation run, the recommended capacity for manufacturing system will be determined instead of running several discrete-event simulation models to find the needed capacity

Knowledge re-use for decision support

Effective decision support has already been identified as a fundamental requirement for the realisation of Network Enabled Capability. Decision making itself is a knowledge-intensive process, and it is known that right decisions can only be reached based on decision maker's good judgement, which in turn is based on sufficient knowledge. It is not unusual for decision makers to make incorrect decisions because of insufficient knowledge. However, it is not always possible for decision makers to have all the knowledge needed for making decisions in complex situations without external support. The re-use of knowledge has been identified as providing an important contribution to such support, and this paper considers one, hitherto unexplored, aspect of how this may be achieved. This paper is concerned with the computational view of knowledge re-use to establish an understanding of a knowledge-based system for decision support. The paper explores knowledge re-use for decision support from two perspectives: knowledge provider's and knowledge re-user's. Key issues and challenges of knowledge re-use are identified from both perspectives. A structural model for knowledge re-use is proposed with initial evaluation through empirical study of both experienced and novice decision maker's behaviour in reusing knowledge to make decisions. The proposed structural model for knowledge re-use captures five main elements (knowledge re-uers, knowledge types, knowledge sources, environment, and integration strategies) as well as the relationships between the elements, which forms a foundation for constructing a knowledge-based decision support system. The paper suggests that further research should be investigating the relationship between knowledge re-use and learning to achieve intelligent decision support

Special Session on Industry 4.0

No abstract available

Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms

The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications

Eco‐Holonic 4.0 Circular Business Model to Conceptualize Sustainable Value Chain Towards Digital Transition

The purpose of this paper is to conceptualize a circular business model based on an Eco-Holonic Architecture, through the integration of circular economy and holonic principles. A conceptual model is developed to manage the complexity of integrating circular economy principles, digital transformation, and tools and frameworks for sustainability into business models. The proposed architecture is multilevel and multiscale in order to achieve the instantiation of the sustainable value chain in any territory. The architecture promotes the incorporation of circular economy and holonic principles into new circular business models. This integrated perspective of business model can support the design and upgrade of the manufacturing companies in their respective industrial sectors. The conceptual model proposed is based on activity theory that considers the interactions between technical and social systems and allows the mitigation of the metabolic rift that exists between natural and social metabolism. This study contributes to the existing literature on circular economy, circular business models and activity theory by considering holonic paradigm concerns, which have not been explored yet. This research also offers a unique holonic architecture of circular business model by considering different levels, relationships, dynamism and contextualization (territory) aspects

Кибербезопасность в образовательных сетях

The paper discusses the possible impact of digital space on a human, as well as human-related directions in cyber-security analysis in the education: levels of cyber-security, social engineering role in cyber-security of education, “cognitive vaccination”. “A Human” is considered in general meaning, mainly as a learner. The analysis is provided on the basis of experience of hybrid war in Ukraine that have demonstrated the change of the target of military operations from military personnel and critical infrastructure to a human in general. Young people are the vulnerable group that can be the main goal of cognitive operations in long-term perspective, and they are the weakest link of the System.У статті обговорюється можливий вплив цифрового простору на людину, а також пов'язані з людиною напрямки кібербезпеки в освіті: рівні кібербезпеки, роль соціального інжинірингу в кібербезпеці освіти, «когнітивна вакцинація». «Людина» розглядається в загальному значенні, головним чином як та, що навчається. Аналіз надається на основі досвіду гібридної війни в Україні, яка продемонструвала зміну цілей військових операцій з військовослужбовців та критичної інфраструктури на людину загалом. Молодь - це вразлива група, яка може бути основною метою таких операцій в довгостроковій перспективі, і вони є найслабшою ланкою системи.В документе обсуждается возможное влияние цифрового пространства на человека, а также связанные с ним направления в анализе кибербезопасности в образовании: уровни кибербезопасности, роль социальной инженерии в кибербезопасности образования, «когнитивная вакцинация». «Человек» рассматривается в общем смысле, в основном как ученик. Анализ представлен на основе опыта гибридной войны в Украине, которая продемонстрировала изменение цели военных действий с военного персонала и критической инфраструктуры на человека в целом. Молодые люди являются уязвимой группой, которая может быть главной целью когнитивных операций в долгосрочной перспективе, и они являются самым слабым звеном Систем