Quantifying the benefits of SPECint distant parallelism in simultaneous multithreading architectures

We exploit the existence of distant parallelism that future compilers could detect and characterise its performance under simultaneous multithreading architectures. By distant parallelism we mean parallelism that cannot be captured by the processor instruction window and that can produce threads suitable for parallel execution in a multithreaded processor. We show that distant parallelism can make feasible wider issue processors by providing more instructions from the distant threads, thus better exploiting the resources from the processor in the case of speeding up single integer applications. We also investigate the necessity of out-of-order processors in the presence of multiple threads of the same program. It is important to notice at this point that the benefits described are totally orthogonal to any other architectural techniques targeting a single thread.Peer ReviewedPostprint (published version

Dynamically managing the communication-parallelism trade-off in future clustered processors

Journal ArticleClustered microarchitectures are an attractive alternative to large monolithic superscalar designs due to their potential for higher clock rates in the face of increasingly wire-delay-constrained process technologies. As increasing transistor counts allow an increase in the number of clusters, thereby allowing more aggressive use of instruction-level parallelism (ILP), the inter-cluster communication increases as data values get spread across a wider area. As a result of the emergence of this trade-off between communication and parallelism, a subset of the total on-chip clusters is optimal for performance. To match the hardware to the application's needs, we use a robust algorithm to dynamically tune the clustered architecture. The algorithm, which is based on program metrics gathered at periodic intervals, achieves an 11% performance improvement on average over the best statically defined architecture. We also show that the use of additional hardware and reconfiguration at basic block boundaries can achieve average improvements of 15%. Our results demonstrate that reconfiguration provides an effective solution to the communication and parallelism trade-off inherent in the communication-bound processors of the future

Dynamic Dependency Collapsing

In this dissertation, we explore the concept of dynamic dependency collapsing. Performance increases in computer architecture are always introduced by exploiting additional parallelism when the clock speed is fixed. We show that further improvements are possible even when the available parallelism in programs are exhausted. This performance improvement is possible due to executing instructions in parallel that would ordinarily have been serialized. We call this concept dependency collapsing. We explore existing techniques that exploit parallelism and show which of them fall under the umbrella of dependency collapsing. We then introduce two dependency collapsing techniques of our own. The first technique collapses data dependencies by executing two normally dependent instructions together by fusing them. We show that exploiting the additional parallelism generated by collapsing these dependencies results in a performance increase. Our second technique collapses resource dependencies to execute instructions that would normally have been serialized due to resource constraints in the processor. We show that it is possible to take advantage of larger in-processor structures while avoiding the power and area penalty this often implies

Introducing runahead threads

Simultaneous Multithreading processors share their resources among multiple threads in order to improve performance. However, a resource control policy is needed to avoid resource conflicts and prevent some threads from monopolizing them. On the contrary, resource conflicts would cause other threads to suffer from resource starvation degrading the overall performance. This situation is especially sensitive for memory bounded threads, because they hold an important amount of resources while long latency accesses are being served. Several fetch policies and resource control techniques have been proposed to overcome these problems by limiting the per-thread resource utilization. Nevertheless, this limitation is harmful for memory bounded threads because it restricts the memory level parallelism available that hides the long latency memory accesses. In this paper, we propose Runahead threads on SMT scenarios as a valuable solution for both exploiting the memory-level parallelism and reducing the resource contention. This approach switches a memory-bounded eager resource thread to a speculative light thread, avoiding critical resource blocking among multiple threads. Furthermore, it improves the thread-level parallelism by removing long-latency memory operations from the instruction window, releasing busy resources. We compare an SMT architecture using Runahead threads (SMTRA) to both state-of-the-art static fetch and dynamic resource control policies. Our results show that the SMTRA combination performs better, in terms of throughput and fairness, than any of the other policies.Postprint (published version

Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Runahead threads to improve SMT performance

In this paper, we propose Runahead Threads (RaT) as a valuable solution for both reducing resource contention and exploiting memory-level parallelism in Simultaneous Multithreaded (SMT) processors. Our technique converts a resource intensive memory-bound thread to a speculative light thread under long-latency blocking memory operations. These speculative threads prefetch data and instructions with minimal resources, reducing critical resource conflicts between threads. We compare an SMT architecture using RaT to both state-of-the-art static fetch policies and dynamic resource control policies. In terms of throughput and fairness, our results show that RaT performs better than any other policy. The proposed mechanism improves average throughput by 37% regarding previous static fetch policies and by 28% compared to previous dynamic resource scheduling mechanisms. RaT also improves fairness by 36% and 30% respectively. In addition, the proposed mechanism permits register file size reduction of up to 60% in a SMT processor without performance degradation.Peer ReviewedPostprint (published version

Dynamically allocating processor resources between nearby and distant ILP

Journal ArticleModern superscalar processors use wide instruction issue widths and out-of-order execution in order to increase instruction-level parallelism (ILP). Because instructions must be committed in order so as to guarantee precise exceptions, increasing ILP implies increasing the sizes of structures such as the register file, issue queue, and reorder buffer. Simultaneously, cycle time constraints limit the sizes of these structures, resulting in conflicting design requirements. In this paper, we present a novel microarchitecture designed to overcome the limitations of a register file size dictated by cycle time constraints. Available registers are dynamically allocated between the primary program thread and a future thread. The future thread executes instructions when the primary thread is limited by resource availability. The future thread is not constrained by in-order commit requirements. It is therefore able to examine a much larger instruction window and jump far ahead to execute ready instructions. Results are communicated back to the primary thread by warming up the register file, instruction cache, data cache, and instruction reuse buffer, and by resolving branch mispredicts early. The proposed microarchitecture is able to get an overall speedup of 1.17 over the base processor for our benchmark set, with speedups of up to 1.64

Identifying, Quantifying, Extracting and Enhancing Implicit Parallelism

The shift of the microprocessor industry towards multicore architectures has placed a huge burden on the programmers by requiring explicit parallelization for performance. Implicit Parallelization is an alternative that could ease the burden on programmers by parallelizing applications ???under the covers??? while maintaining sequential semantics externally. This thesis develops a novel approach for thinking about parallelism, by casting the problem of parallelization in terms of instruction criticality. Using this approach, parallelism in a program region is readily identified when certain conditions about fetch-criticality are satisfied by the region. The thesis formalizes this approach by developing a criticality-driven model of task-based parallelization. The model can accurately predict the parallelism that would be exposed by potential task choices by capturing a wide set of sources of parallelism as well as costs to parallelization. The criticality-driven model enables the development of two key components for Implicit Parallelization: a task selection policy, and a bottleneck analysis tool. The task selection policy can partition a single-threaded program into tasks that will profitably execute concurrently on a multicore architecture in spite of the costs associated with enforcing data-dependences and with task-related actions. The bottleneck analysis tool gives feedback to the programmers about data-dependences that limit parallelism. In particular, there are several ???accidental dependences??? that can be easily removed with large improvements in parallelism. These tools combine into a systematic methodology for performance tuning in Implicit Parallelization. Finally, armed with the criticality-driven model, the thesis revisits several architectural design decisions, and finds several encouraging ways forward to increase the scope of Implicit Parallelization.unpublishednot peer reviewe

Affordable kilo-instruction processors

Diversos motius expliquen l'estancament en el que es troba el desenvolupament del processador tradicional dissenyat per maximitzar el rendiment d'un únic fil d'execució. Per una banda, técniques agressives com la supersegmentacó del camí de dades o l'execució fora d'ordre tenen un impacte molt negatiu sobre el consum de potència i la complexitat del disseny. Altrament, l'increment en la freqüència del processador augmenta la discrepància entre la velocitat del processador i el temps d'accés a memòria principal. Tot i que les memòries cau redueixen considerablement el nombre d'accessos a memòria principal, aquests accessos introdueixen latencies prou grans per reduir considerablement el rendiment. Tècniques convencionals com l'execució fora d'ordre, útils per ocultar accessos a les memòries cau de 2on nivell, no estan pensades per ocultar latències tan grans. Caldrien cues amb mides de centenars d'instruccions i milers de registres per tal de no interrompre l'execució en el moment de produir-se un accés a memòria principal. Desafortunadament, la tecnologia disponible no és eficient per implementar aquestes estructures monolíticament, doncs resultaria un temps d'accés molt elevat, un consum de potència igualment elevat i un àrea no menyspreable. En aquesta tesi s'han estudiat tècniques que permeten l'implementació d'un processador amb capacitat per continuar processant instruccions en el cas de que es produeixin accessos a memòria principal. Les condicions per a que aquest processador sigui implementable són que estigui basat en estructures de mida convencional i que tingui una unitat de control senzilla. El repte es troba en conciliar un model de processador distribuït amb un control senzill. El problema del disseny del processador s'ha enfocat observant el comportament d'un processador de recursos infinits. S'ha observat que l'execució segueix uns patrons molt interessants, basats en la localitat d'execució. En aplicacions numèriques s'observa que més del 70% de les instruccions no depenen de accessos a memòria principal. Aixó és molt important doncs mostra que sempre hi ha una porció important d'instruccions executables poc després de la decodificació. Aixó permet proposar un nou tipus de processador amb dues unitats d'execució. La primera unitat (el "Cache Processor") processa a alta velocitat instruccions independents de memòria principal. La segona unitat ("Memory Processor") processa les instruccions dependents de accessos a memòria principal, pero de forma molt més relaxada, cosa que li permet mantenir milers de instruccions en vol. Aquesta proposta rep el nom de Decoupled KILO-Instruction Processor (D-KIP) i té forces avantatges: per un costat permet la construcció d'un kilo-instruction processor basat en estructures convencionals i per l'altre simplifica el disseny ja que minimitza les interaccions entre ambdos unitats d'execució.En aquesta tesi es proposen dos implementacions de processadors desacoblats: el D-KIP original, i el Flexible Heterogeneous MultiCore (FMC). Sobre aquestes propostes s'analitza el rendiment i es compara amb altres tècniques que incrementan el parallelisme de memoria, com el prefetching o l'execució "runahead". D'aquesta avaluació es desprén que el processador FMC té un rendiment similar al de un processador convencional amb una finestra de 1500 instruccions en vol. Posteriorment s'analitza l'integració del FMC en entorns multicore/multiprogrammats. La tesi es completa amb la proposta d'una cua de loads i stores (LSQ) per a aquest tipus de processador.Several motives explain the slowdown of high-performance single-thread processor development. On the one hand, aggressive techniques such as superpipelining or out-of-order execution have a considerable impact on power consumption and design complexity. On the other hand, the increment in processor frequencies has led to a large disparity between processor speed and memory access time. Although cache memories considerably reduce the number of accesses to main memory, the remaining accesses introduce latencies large enough to considerably decrease performance. Conventional techniques such as out-of-order execution, while effective in hiding L2 cache accesses, cannot hide latencies this large. Queues of hundreds of entries and thousands of registers would be necessary in order to prevent execution from stalling in the event of a L2 cache miss. Unfortunately, current technology cannot efficiently implement such structures monolithically, as access latencies would considerably increase, as would power consumption and area consumption.In this thesis we studied techniques that allow the processor to continue processing instructions in the event of main memory accesses. The conditions for such a processor to be implementable are that it should be based on structures of conventional size and that it should feature simple control logic. The challenge lies in being able to design a distributed processor with simple control. The design of this processor has been approached by analyzing the behavior of a processor with infinite resources. We have observed that execution follows a very interesting pattern based on execution locality. In numerical codes we observed that over 70% of all instructions do not depend on memory accesses. This is interesting since it shows that there is always a large portion of instructions that can be executed shortly after decode. This allows us to propose a new kind of processor with two execution units. The first unit, the Cache Processor, processes memory-independent instructions at high speed. The second unit, the Memory Processor, processes instructions that depend on main memory accesses, but using relaxed scheduling logic, which allows it to scale to thousands of in-flight instructions. This proposal, which receives the name of Decoupled KILO-Instruction Processor (D-KIP), has several advantages. On the one hand it allows the construction of a kilo-instruction processor based on conventional structures and, on the other hand, it simplifies the design as the interaction between both execution units is minimal. In this thesis two implementations for this kind of processor are presented: the original D-KIP and the Flexible Heterogeneous MultiCore (FMC). The performance of these proposals is analyzed and compared to other proposals that increase memory-level parallelism, such as prefetching or runahead execution. It is observed that the FMC processor performs at the same level of a conventional processor with a window of around 1500 instructions. Further, the integration of the FMC processor into a multicore/multiprogrammed environment is studied. This thesis concludes with the proposal of a two-level Load/Store Queue for this kind of processor

Doctor of Philosophy

dissertationThe internet-based information infrastructure that has powered the growth of modern personal/mobile computing is composed of powerful, warehouse-scale computers or datacenters. These heavily subscribed datacenters perform data-processing jobs under intense quality of service guarantees. Further, high-performance compute platforms are being used to model and analyze increasingly complex scientific problems and natural phenomena. To ensure that the high-performance needs of these machines are met, it is necessary to increase the efficiency of the memory system that supplies data to the processing cores. Many of the microarchitectural innovations that were designed to scale the memory wall (e.g., out-of-order instruction execution, on-chip caches) are being rendered less effective due to several emerging trends (e.g., increased emphasis on energy consumption, limited access locality). This motivates the optimization of the main memory system itself. The key to an efficient main memory system is the memory controller. In particular, the scheduling algorithm in the memory controller greatly influences its performance. This dissertation explores this hypothesis in several contexts. It develops tools to better understand memory scheduling and develops scheduling innovations for CPUs and GPUs. We propose novel memory scheduling techniques that are strongly aware of the access patterns of the clients as well as the microarchitecture of the memory device. Based on these, we present (i) a Dynamic Random Access Memory (DRAM) chip microarchitecture optimized for reducing write-induced slowdown, (ii) a memory scheduling algorithm that exploits these features, (iii) several memory scheduling algorithms to reduce the memory-related stall experienced by irregular General Purpose Graphics Processing Unit (GPGPU) applications, and (iv) the Utah Simulated Memory Module (USIMM), a detailed, validated simulator for DRAM main memory that we use for analyzing and proposing scheduler algorithms