Performance Evaluation of Centralized Reconfigurable Transmitting Power Scheme in Wireless Network-on-chip

Network-on-chip (NoC) is an on-chip communication network that allows parallel communication among all cores to improve inter-core performance. Wireless NoC (WiNoC) introduces long-range and high bandwidth radio frequency (RF) interconnects that can possibly reduce the multi-hop communication of the planar metal interconnects in conventional NoC platforms. In WiNoC, RF transceivers account for a significant power consumption, particularly its transmitter, out of its total communication energy. This paper evaluates the energy and latency performance of a closed loop power management mechanism which enables transmitting power reconfiguration in WiNoC based on number of erroneous received packets. The scheme achieves significant energy savings with limited performance degradation and insignificant impact on throughput

Architecting a One-to-many Traffic-Aware and Secure Millimeter-Wave Wireless Network-in-Package Interconnect for Multichip Systems

With the aggressive scaling of device geometries, the yield of complex Multi Core Single Chip(MCSC) systems with many cores will decrease due to the higher probability of manufacturing defects especially, in dies with a large area. Disintegration of large System-on-Chips(SoCs) into smaller chips called chiplets has shown to improve the yield and cost of complex systems. Therefore, platform-based computing modules such as embedded systems and micro-servers have already adopted Multi Core Multi Chip (MCMC) architectures overMCSC architectures. Due to the scaling of memory intensive parallel applications in such systems, data is more likely to be shared among various cores residing in different chips resulting in a significant increase in chip-to-chip traffic, especially one-to-many traffic. This one-to-many traffic is originated mainly to maintain cache-coherence between many cores residing in multiple chips. Besides, one-to-many traffics are also exploited by many parallel programming models, system-level synchronization mechanisms, and control signals. How-ever, state-of-the-art Network-on-Chip (NoC)-based wired interconnection architectures do not provide enough support as they handle such one-to-many traffic as multiple unicast trafficusing a multi-hop MCMC communication fabric. As a result, even a small portion of such one-to-many traffic can significantly reduce system performance as traditional NoC-basedinterconnect cannot mask the high latency and energy consumption caused by chip-to-chipwired I/Os. Moreover, with the increase in memory intensive applications and scaling of MCMC systems, traditional NoC-based wired interconnects fail to provide a scalable inter-connection solution required to support the increased cache-coherence and synchronization generated one-to-many traffic in future MCMC-based High-Performance Computing (HPC) nodes. Therefore, these computation and memory intensive MCMC systems need an energy-efficient, low latency, and scalable one-to-many (broadcast/multicast) traffic-aware interconnection infrastructure to ensure high-performance. Research in recent years has shown that Wireless Network-in-Package (WiNiP) architectures with CMOS compatible Millimeter-Wave (mm-wave) transceivers can provide a scalable, low latency, and energy-efficient interconnect solution for on and off-chip communication. In this dissertation, a one-to-many traffic-aware WiNiP interconnection architecture with a starvation-free hybrid Medium Access Control (MAC), an asymmetric topology, and a novel flow control has been proposed. The different components of the proposed architecture are individually one-to-many traffic-aware and as a system, they collaborate with each other to provide required support for one-to-many traffic communication in a MCMC environment. It has been shown that such interconnection architecture can reduce energy consumption and average packet latency by 46.96% and 47.08% respectively for MCMC systems. Despite providing performance enhancements, wireless channel, being an unguided medium, is vulnerable to various security attacks such as jamming induced Denial-of-Service (DoS), eavesdropping, and spoofing. Further, to minimize the time-to-market and design costs, modern SoCs often use Third Party IPs (3PIPs) from untrusted organizations. An adversary either at the foundry or at the 3PIP design house can introduce a malicious circuitry, to jeopardize an SoC. Such malicious circuitry is known as a Hardware Trojan (HT). An HTplanted in the WiNiP from a vulnerable design or manufacturing process can compromise a Wireless Interface (WI) to enable illegitimate transmission through the infected WI resulting in a potential DoS attack for other WIs in the MCMC system. Moreover, HTs can be used for various other malicious purposes, including battery exhaustion, functionality subversion, and information leakage. This information when leaked to a malicious external attackercan reveals important information regarding the application suites running on the system, thereby compromising the user profile. To address persistent jamming-based DoS attack in WiNiP, in this dissertation, a secure WiNiP interconnection architecture for MCMC systems has been proposed that re-uses the one-to-many traffic-aware MAC and existing Design for Testability (DFT) hardware along with Machine Learning (ML) approach. Furthermore, a novel Simulated Annealing (SA)-based routing obfuscation mechanism was also proposed toprotect against an HT-assisted novel traffic analysis attack. Simulation results show that,the ML classifiers can achieve an accuracy of 99.87% for DoS attack detection while SA-basedrouting obfuscation could reduce application detection accuracy to only 15% for HT-assistedtraffic analysis attack and hence, secure the WiNiP fabric from age-old and emerging attacks

Adaptive Baseband Pro cessing and Configurable Hardware for Wireless Communication

The world of information is literally at one’s fingertips, allowing access to previously unimaginable amounts of data, thanks to advances in wireless communication. The growing demand for high speed data has necessitated theuse of wider bandwidths, and wireless technologies such as Multiple-InputMultiple-Output (MIMO) have been adopted to increase spectral efficiency.These advanced communication technologies require sophisticated signal processing, often leading to higher power consumption and reduced battery life.Therefore, increasing energy efficiency of baseband hardware for MIMO signal processing has become extremely vital. High Quality of Service (QoS)requirements invariably lead to a larger number of computations and a higherpower dissipation. However, recognizing the dynamic nature of the wirelesscommunication medium in which only some channel scenarios require complexsignal processing, and that not all situations call for high data rates, allowsthe use of an adaptive channel aware signal processing strategy to provide adesired QoS. Information such as interference conditions, coherence bandwidthand Signal to Noise Ratio (SNR) can be used to reduce algorithmic computations in favorable channels. Hardware circuits which run these algorithmsneed flexibility and easy reconfigurability to switch between multiple designsfor different parameters. These parameters can be used to tune the operations of different components in a receiver based on feedback from the digitalbaseband. This dissertation focuses on the optimization of digital basebandcircuitry of receivers which use feedback to trade power and performance. Aco-optimization approach, where designs are optimized starting from the algorithmic stage through the hardware architectural stage to the final circuitimplementation is adopted to realize energy efficient digital baseband hardwarefor mobile 4G devices. These concepts are also extended to the next generation5G systems where the energy efficiency of the base station is improved.This work includes six papers that examine digital circuits in MIMO wireless receivers. Several key blocks in these receiver include analog circuits thathave residual non-linearities, leading to signal intermodulation and distortion.Paper-I introduces a digital technique to detect such non-linearities and calibrate analog circuits to improve signal quality. The concept of a digital nonlinearity tuning system developed in Paper-I is implemented and demonstratedin hardware. The performance of this implementation is tested with an analogchannel select filter, and results are presented in Paper-II. MIMO systems suchas the ones used in 4G, may employ QR Decomposition (QRD) processors tosimplify the implementation of tree search based signal detectors. However,the small form factor of the mobile device increases spatial correlation, whichis detrimental to signal multiplexing. Consequently, a QRD processor capableof handling high spatial correlation is presented in Paper-III. The algorithm and hardware implementation are optimized for carrier aggregation, which increases requirements on signal processing throughput, leading to higher powerdissipation. Paper-IV presents a method to perform channel-aware processingwith a simple interpolation strategy to adaptively reduce QRD computationcount. Channel properties such as coherence bandwidth and SNR are used toreduce multiplications by 40% to 80%. These concepts are extended to usetime domain correlation properties, and a full QRD processor for 4G systemsfabricated in 28 nm FD-SOI technology is presented in Paper-V. The designis implemented with a configurable architecture and measurements show thatcircuit tuning results in a highly energy efficient processor, requiring 0.2 nJ to1.3 nJ for each QRD. Finally, these adaptive channel-aware signal processingconcepts are examined in the scope of the next generation of communicationsystems. Massive MIMO systems increase spectral efficiency by using a largenumber of antennas at the base station. Consequently, the signal processingat the base station has a high computational count. Paper-VI presents a configurable detection scheme which reduces this complexity by using techniquessuch as selective user detection and interpolation based signal processing. Hardware is optimized for resource sharing, resulting in a highly reconfigurable andenergy efficient uplink signal detector

System-level power optimization:techniques and tools

This tutorial surveys design methods for energy-efficient system-level design. We consider electronic sytems consisting of a hardware platform and software layers. We consider the three major constituents of hardware that consume energy, namely computation, communication, and storage units, and we review methods of reducing their energy consumption. We also study models for analyzing the energy cost of software, and methods for energy-efficient software design and compilation. This survery is organized around three main phases of a system design: conceptualization and modeling design and implementation, and runtime management. For each phase, we review recent techniques for energy-efficient design of both hardware and software

Korkean luotettavuuden verkkohallinteiset laitteiden väliset yhteydet

Fifth generation cellular networks aim to provide new types of services. Prominent amongst these are industrial automation and vehicle-to-vehicle communications. Such new use cases demand lower latencies and higher reliability along with greater flexibility than current and past generations of cellular technologies allow. Enabling these new service types requires the introduction of device-to-device communications (D2D). This work investigated network-controlled D2D schemes wherein cellular base stations retain control over spectrum usage. D2D nodes assemble into clusters. Each D2D cluster then organises itself as it sees fit within the constraints imposed by the cellular network. A review of proposed D2D control schemes was conducted to identify pertinent interference issues. Measurements were then devised to empirically collect quantitative data on the impact of this interference. Measurements were conducted using a software-defined radio (SDR) platform. An SDR based system was selected to enable a low cost and highly flexible iterative approach to development while still providing the accuracy of real-world measurement. D2D functionality was added to the chosen SDR system with the essential parts of Long Term Evolution Release 8 implemented. Two series of measurements were performed. The first aimed to determine the adjacent channel interference impact of a cellular user being located near a D2D receiver. The second measurement series collected data on the co-channel interference of spectrum re-use between a D2D link and a moving cellular transmitter. Based on these measurements it was determined that D2D communications within a cellular system is feasible. Furthermore, the required frequency of channel state information reporting as a function of node velocity was determined.Viidennen sukupolven solukkoverkoilla pyritään mahdollistamaan uudentyyppisiä palveluja kuten teollisuusautomatiikkaa ja ajoneuvojen välistä viestintää. Tämänkaltaiset uudet käyttötarkoitukset vaativat lyhyempien viiveiden ja korkeammat luotettavuuden ohella myös suurempaa joustavuutta kuin minkä nykyisen sukupolven matkapuhelinverkkoteknologiat sallivat. Edellä mainittujen uusien palvelujen toteuttaminen vaatii suoria laitteiden välisiä yhteyksiä (engl. D2D). Tässä diplomityössä keskityttiin tutkimaan verkkohallinteisia D2D-rakenteita, joissa solukkoverkko hallinnoi spektrin käyttöä. D2D-päätteet liittyvät yhteen muodostaakseen klustereita, jotka hallinnoivat sisäistä tietoliikennettään parhaaksi katsomallaan tavalla solukkoverkon asettamien rajoitusten puitteissa. Kirjallisuuskatsauksen avulla selvitettiin aiemmissa tutkimuksissa esitetyille D2D-ratkaisuille yhteiset interferenssiongelmat. Näiden vaikutusta ja suuruutta tutkittiin mittausten avulla. Mittaukset toteutettiin ohjelmistoradioalustan (engl. SDR) avulla. SDR-pohjaisen järjestelmän käyttö mahdollisti edullisen ja joustavan tavan kerätä empiirisiä mittaustuloksia. D2D-toiminnallisuus lisättiin Long Term Evolution Release 8:n olennaiset ominaisuudet omaavaan alustaan. Tällä alustalla toteutettiin kaksi mittaussarjaa. Ensimmäisellä kerättiin tuloksia viereisellä kanavalla toimivan matkapuhelimen D2D-vastaanottimelle aiheuttamasta interferenssistä näiden ollessa toistensa läheisyydessä. Toisella mittaussarjalla selvitettiin samalla kanavalla toimivan D2D-yhteyden ja liikkuvan matkapuhelimen välistä interferenssiä. Mittausten perusteella todettiin D2D-toiminnallisuuden lisäämisen solukkoverkkoon olevan mahdollista. Lisäksi laskettiin vaadittava kanavalaadun päivitystiheys päätteiden nopeuden funktiona

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks

Dynamic reconfiguration frameworks for high-performance reliable real-time reconfigurable computing

The sheer hardware-based computational performance and programming flexibility offered by reconfigurable hardware like Field-Programmable Gate Arrays (FPGAs) make them attractive for computing in applications that require high performance, availability, reliability, real-time processing, and high efficiency. Fueled by fabrication process scaling, modern reconfigurable devices come with ever greater quantities of on-chip resources, allowing a more complex variety of applications to be developed. Thus, the trend is that technology giants like Microsoft, Amazon, and Baidu now embrace reconfigurable computing devices likes FPGAs to meet their critical computing needs. In addition, the capability to autonomously reprogramme these devices in the field is being exploited for reliability in application domains like aerospace, defence, military, and nuclear power stations. In such applications, real-time computing is important and is often a necessity for reliability. As such, applications and algorithms resident on these devices must be implemented with sufficient considerations for real-time processing and reliability. Often, to manage a reconfigurable hardware device as a computing platform for a multiplicity of homogenous and heterogeneous tasks, reconfigurable operating systems (ROSes) have been proposed to give a software look to hardware-based computation. The key requirements of a ROS include partitioning, task scheduling and allocation, task configuration or loading, and inter-task communication and synchronization. Existing ROSes have met these requirements to varied extents. However, they are limited in reliability, especially regarding the flexibility of placing the hardware circuits of tasks on device’s chip area, the problem arising more from the partitioning approaches used. Indeed, this problem is deeply rooted in the static nature of the on-chip inter-communication among tasks, hampering the flexibility of runtime task relocation for reliability. This thesis proposes the enabling frameworks for reliable, available, real-time, efficient, secure, and high-performance reconfigurable computing by providing techniques and mechanisms for reliable runtime reconfiguration, and dynamic inter-circuit communication and synchronization for circuits on reconfigurable hardware. This work provides task configuration infrastructures for reliable reconfigurable computing. Key features, especially reliability-enabling functionalities, which have been given little or no attention in state-of-the-art are implemented. These features include internal register read and write for device diagnosis; configuration operation abort mechanism, and tightly integrated selective-area scanning, which aims to optimize access to the device’s reconfiguration port for both task loading and error mitigation. In addition, this thesis proposes a novel reliability-aware inter-task communication framework that exploits the availability of dedicated clocking infrastructures in a typical FPGA to provide inter-task communication and synchronization. The clock buffers and networks of an FPGA use dedicated routing resources, which are distinct from the general routing resources. As such, deploying these dedicated resources for communication sidesteps the restriction of static routes and allows a better relocation of circuits for reliability purposes. For evaluation, a case study that uses a NASA/JPL spectrometer data processing application is employed to demonstrate the improved reliability brought about by the implemented configuration controller and the reliability-aware dynamic communication infrastructure. It is observed that up to 74% time saving can be achieved for selective-area error mitigation when compared to state-of-the-art vendor implementations. Moreover, an improvement in overall system reliability is observed when the proposed dynamic communication scheme is deployed in the data processing application. Finally, one area of reconfigurable computing that has received insufficient attention is security. Meanwhile, considering the nature of applications which now turn to reconfigurable computing for accelerating compute-intensive processes, a high premium is now placed on security, not only of the device but also of the applications, from loading to runtime execution. To address security concerns, a novel secure and efficient task configuration technique for task relocation is also investigated, providing configuration time savings of up to 32% or 83%, depending on the device; and resource usage savings in excess of 90% compared to state-of-the-art

Topical Workshop on Electronics for Particle Physics

The purpose of the workshop was to present results and original concepts for electronics research and development relevant to particle physics experiments as well as accelerator and beam instrumentation at future facilities; to review the status of electronics for the LHC experiments; to identify and encourage common efforts for the development of electronics; and to promote information exchange and collaboration in the relevant engineering and physics communities