Agile-SD: A Linux-based TCP Congestion Control Algorithm for Supporting High-speed and Short-distance Networks

Recently, high-speed and short-distance networks are widely deployed and their necessity is rapidly increasing everyday. This type of networks is used in several network applications; such as Local Area Networks (LAN) and Data Center Networks (DCN). In LANs and DCNs, high-speed and short-distance networks are commonly deployed to connect between computing and storage elements in order to provide rapid services. Indeed, the overall performance of such networks is significantly influenced by the Congestion Control Algorithm (CCA) which suffers from the problem of bandwidth under-utilization, especially if the applied buffer regime is very small. In this paper, a novel loss-based CCA tailored for high-speed and Short-Distance (SD) networks, namely Agile-SD, has been proposed. The main contribution of the proposed CCA is to implement the mechanism of agility factor. Further, intensive simulation experiments have been carried out to evaluate the performance of Agile-SD compared to Compound and Cubic which are the default CCAs of the most commonly used operating systems. The results of the simulation experiments show that the proposed CCA outperforms the compared CCAs in terms of average throughput, loss ratio and fairness, especially when a small buffer is applied. Moreover, Agile-SD shows lower sensitivity to the buffer size change and packet error rate variation which increases its efficiency.Comment: 12 Page

Endpoint-transparent Multipath Transport with Software-defined Networks

Multipath forwarding consists of using multiple paths simultaneously to transport data over the network. While most such techniques require endpoint modifications, we investigate how multipath forwarding can be done inside the network, transparently to endpoint hosts. With such a network-centric approach, packet reordering becomes a critical issue as it may cause critical performance degradation. We present a Software Defined Network architecture which automatically sets up multipath forwarding, including solutions for reordering and performance improvement, both at the sending side through multipath scheduling algorithms, and the receiver side, by resequencing out-of-order packets in a dedicated in-network buffer. We implemented a prototype with commonly available technology and evaluated it in both emulated and real networks. Our results show consistent throughput improvements, thanks to the use of aggregated path capacity. We give comparisons to Multipath TCP, where we show our approach can achieve a similar performance while offering the advantage of endpoint transparency

Datacenter Traffic Control: Understanding Techniques and Trade-offs

Datacenters provide cost-effective and flexible access to scalable compute and storage resources necessary for today's cloud computing needs. A typical datacenter is made up of thousands of servers connected with a large network and usually managed by one operator. To provide quality access to the variety of applications and services hosted on datacenters and maximize performance, it deems necessary to use datacenter networks effectively and efficiently. Datacenter traffic is often a mix of several classes with different priorities and requirements. This includes user-generated interactive traffic, traffic with deadlines, and long-running traffic. To this end, custom transport protocols and traffic management techniques have been developed to improve datacenter network performance. In this tutorial paper, we review the general architecture of datacenter networks, various topologies proposed for them, their traffic properties, general traffic control challenges in datacenters and general traffic control objectives. The purpose of this paper is to bring out the important characteristics of traffic control in datacenters and not to survey all existing solutions (as it is virtually impossible due to massive body of existing research). We hope to provide readers with a wide range of options and factors while considering a variety of traffic control mechanisms. We discuss various characteristics of datacenter traffic control including management schemes, transmission control, traffic shaping, prioritization, load balancing, multipathing, and traffic scheduling. Next, we point to several open challenges as well as new and interesting networking paradigms. At the end of this paper, we briefly review inter-datacenter networks that connect geographically dispersed datacenters which have been receiving increasing attention recently and pose interesting and novel research problems.Comment: Accepted for Publication in IEEE Communications Surveys and Tutorial

CloudJet4BigData: Streamlining Big Data via an Accelerated Socket Interface

Big data needs to feed users with fresh processing results and cloud platforms can be used to speed up big data applications. This paper describes a new data communication protocol (CloudJet) for long distance and large volume big data accessing operations to alleviate the large latencies encountered in sharing big data resources in the clouds. It encapsulates a dynamic multi-stream/multi-path engine at the socket level, which conforms to Portable Operating System Interface (POSIX) and thereby can accelerate any POSIX-compatible applications across IP based networks. It was demonstrated that CloudJet accelerates typical big data applications such as very large database (VLDB), data mining, media streaming and office applications by up to tenfold in real-world tests

FAST TCP: Motivation, Architecture, Algorithms, Performance

We describe FAST TCP, a new TCP congestion control algorithm for high-speed long-latency networks, from design to implementation. We highlight the approach taken by FAST TCP to address the four difficulties which the current TCP implementation has at large windows. We describe the architecture and summarize some of the algorithms implemented in our prototype. We characterize its equilibrium and stability properties. We evaluate it experimentally in terms of throughput, fairness, stability, and responsiveness