Identification of basic thermal technical characteristics of building materials

summary:Modelling of building heat transfer needs two basic material characteristics: heat conduction factor and thermal capacity. Under some simplifications these two factors can be determined from a rather simple equipment, generating heat from one of two aluminium plates into the material sample and recording temperature on the contacts between the sample and the plates. However, the numerical evaluation of both characteristics leads to a non-trivial optimization problem. This article suggests an efficient numerical algorithm for its solution, based on the weak formulation of certain initial and boundary problem for the heat transfer equation, on the classical Fourier analysis and on the Newton iterative method, and demonstrates its practical application

Family residence

Bakalářská práce je zaměřena na konstrukční řešení rodinného domu ve formě prováděcí dokumentace. Rodinný dům je navržen pro jednu rodinu. Objekt je situován na mírně svažité a velmi prostorné parcele č. 693/12, k.ú. Lhota za Červeným Kostelcem, Červený Kostelec, Královeradecký kraj. Dům je navržen jako dvouposchoďový s garáží pro dvě auta. Objekt je zděný z pórobetonových bloků. Nad obytnou částí je navržena sedlová střecha se sklonem 38° a nad prostorem garáže je navržena plochá pochozí střecha se sklonem 1°.The bachelor’s thesis is aimed on the solution of construction of "Family residence" in form of project documentation. The house is intended for one family. It is located on a slightly sloping parcel 693/12, cadastral area Lhota za Červeným Kostelecem, Červený Kostelec, Královehradecký district. The house is without basement and has two storeys with garage for two cars. The object is masonry building with gable roof with a slope of 38° and a flat roof with a slope of 1 °.

Influence of insulating materials on green building rating system results

This paper analyzes the impact of a change in the thermal insulating material on both the energy and environmental performance of a building, evaluated through two different green building assessment methods: Leadership in Energy and Environmental Design (LEED) and Istituto per l'innovazione e Trasparenza degli Appalti e la Compatibilità Ambientale (ITACA). LEED is one of the most qualified rating systems at an international level; it assesses building sustainability thanks to a point-based system where credits are divided into six different categories. One of these is fully related to building materials. The ITACA procedure derives from the international evaluation system Sustainable Building Tool (SBTool), modified according to the Italian context. In the region of Umbria, ITACA certification is composed of 20 technical sheets, which are classified into five macro-areas. The analysis was developed on a residential building located in the central Italy. It was built taking into account the principles of sustainability as far as both structural and technical solutions are concerned. In order to evaluate the influence of thermal insulating material, different configurations of the envelope were considered, replacing the original material (glass wool) with a synthetic one (expanded polystyrene, EPS) and two natural materials (wood fiber and kenaf). The study aims to highlight how the materials characteristics can affect building energy and environmental performance and to point out the different approaches of the analyzed protocols

Strategies for building pathology reports in an urban rehabilitation process: Project of the Old City Centre of Coimbra

The increasing interest on architectural heritage associated to the recognised building value, at economic, social and cultural levels have stimulated, in the recent decades, the urban rehabilitation and renovation o several cities in Europe. Despite the strategy or method adopted in a city renovation process, its efficiency depends mainly on: type of buildings (structural systems, construction techniques and materials); intervention level (singular buildings, groups of buildings, urban zones, etc.); and, project objective (risk assessment, decision making to support future rehabilitation projects, definition of council maintenance policies, etc.). In what concerns large renovation programs of old city centres, choosing the most adequate approach for inspection, appraisal and diagnosis is a complex task that can determine the success or failure of the project purpose. This paper describes the preparation phase of the inspection of 700 buildings located in the old city centre of Coimbra (Portugal), where a global renovation process is planned for the forthcoming years. In the scope of the renovation and rehabilitation process, the city council contract a complete identification and inspection survey of the buildings, directed on three different domains: (a) architectural typologies, (b) constructive and pathological condition of buildings, and (c) socio-demographic characterisation, of this part of the city. It will be present the check-lists developed and some of the obtained results on point (b), related to roofing systems, and exterior façades. This diagnosis procedure shows that the inspection results quality is quite dependent on the items surveyed for each construction element (roof, façade, internal members, installation efficiency), as well as on the possibility of their correlation for a single building. The adopted method has been applied on 70% of the buildings inspected within the project perimeter. Further treatment of the inspection and appraisal data will allow the developing pathology reports and list repair actions, and estimating rehabilitation costs. It will also help to produce defect level diagrams and seismic building risk maps, but, most important, to improve and guide a renewal strategy and intervention methodology for old buildings

Overview of methods to analyse dynamic data

This book gives an overview of existing data analysis methods to analyse the dynamic data obtained from full scale testing, with their advantages and drawbacks. The overview of full scale testing and dynamic data analysis is limited to energy performance characterization of either building components or whole buildings. The methods range from averaging and regression methods to dynamic approaches based on system identification techniques. These methods are discussed in relation to their application in following in situ measurements: -measurement of thermal transmittance of building components based on heat flux meters; -measurement of thermal and solar transmittance of building components tested in outdoor calorimetric test cells; -measurement of heat transfer coefficient and solar aperture of whole buildings based on co-heating or transient heating tests; -characterisation of the energy performance of whole buildings based on energy use monitoring

Adding value and meaning to coheating tests

Purpose: The coheating test is the standard method of measuring the heat loss coefficient of a building, but to be useful the test requires careful and thoughtful execution. Testing should take place in the context of additional investigations in order to achieve a good understanding of the building and a qualitative and (if possible) quantitative understanding of the reasons for any performance shortfall. The paper aims to discuss these issues. Design/methodology/approach: Leeds Metropolitan University has more than 20 years of experience in coheating testing. This experience is drawn upon to discuss practical factors which can affect the outcome, together with supporting tests and investigations which are often necessary in order to fully understand the results. Findings: If testing is approached using coheating as part of a suite of investigations, a much deeper understanding of the test building results. In some cases it is possible to identify and quantify the contributions of different factors which result in an overall performance shortfall. Practical implications: Although it is not practicable to use a fully investigative approach for large scale routine quality assurance, it is extremely useful for purposes such as validating other testing procedures, in-depth study of prototypes or detailed investigations where problems are known to exist. Social implications: Successful building performance testing is a vital tool to achieve energy saving targets. Originality/value: The approach discussed clarifies some of the technical pitfalls which may be encountered in the execution of coheating tests and points to ways in which the maximum value can be extracted from the test period, leading to a meaningful analysis of the building's overall thermal performance

Case studies of outdoor testing and analysis of building components

The construction and development of the PASSYS/PASLINK outdoor test cells were funded by the European Commission, with the objective of providing high-quality test environments for quantifying the performance of passive solar building components. Over the years since the original test cells were commissioned, the initial concept for outdoor testing has been extended to include other test cell types. Significant improvements have been made to the experimental procedures and analysis techniques, and a broad range of components has been tested. This paper describes representative experiments that have been conducted using these highly controlled outdoor test environments, indicates some of the related analysis, and shows the type of information that can be obtained from such tests. It demonstrates the way in which component performance can be ascertained in the realistic external environment. The case studies chosen range from building component tests within EC research projects to commercial tests, and from conventional building components to novel integrated facade systems. They also include a large range of passive and active components. Each case study summarises the test component, the purpose of the test, details of the test configuration (period of test, instrumentation, etc.), results and analysis, and associated modelling and monitoring where appropriate. The paper concludes with an appraisal of the advantages and limitations of the test cells for the various component types

Security risk assessment and protection in the chemical and process industry

This article describes a security risk assessment and protection methodology that was developed for use in the chemical- and process industry in Belgium. The approach of the method follows a risk-based approach that follows desing principles for chemical safety. That approach is beneficial for workers in the chemical industry because they recognize the steps in this model from familiar safety models .The model combines the rings-of-protection approach with generic security practices including: management and procedures, security technology (e.g. CCTV, fences, and access control), and human interactions (pro-active as well as re-active). The method is illustrated in a case-study where a practical protection plan was developed for an existing chemical company. This chapter demonstrates that the method is useful for similar chemical- and process industrial activities far beyond the Belgian borders, as well as for cross-industrial security protection. This chapter offers an insight into how the chemical sector protects itself on the one hand, and an insight into how security risk management can be practiced on the other hand