1,796 research outputs found
Guest editorial for the special issue on software-defined radio transceivers and circuits for 5G wireless communications
Yichuang Sun, Baoyong Chi, and Heng Zhang, Guest Editorial for the Special Issue on Software-Defined Radio Transceivers and Circuits for 5G Wireless Communications, published in IEEEE Transactions on Circuits and Systems II: Express Briefs, Vol. 63 (1): 1-3, January 2016, doi: https://doi.org/10.1109/TCSII.2015.2506979.Peer reviewedFinal Accepted Versio
Guest editorial: Special issue on selected papers from IEEE BioCAS 2018
The papers in this special section were presented at the 2018 IEEE Biomedical Circuits and Systems Conference (BioCAS 2018) that was held in in Cleveland, OH, from October 17–19, 2018
Equalization of Third-Order Intermodulation Products in Wideband Direct Conversion Receivers
This paper reports a SAW-less direct-conversion receiver which utilizes a mixed-signal feedforward path to regenerate and adaptively cancel IM3 products, thus accomplishing system-level linearization. The receiver system performance is dominated by a custom integrated RF front end implemented in 130-nm CMOS and achieves an uncorrected out-of-band IIP3 of -7.1 dBm under the worst-case UMTS FDD Region 1 blocking specifications. Under IM3 equalization, the receiver achieves an effective IIP3 of +5.3 dBm and meets the UMTS BER sensitivity requirement with 3.7 dB of margin
XNOR Neural Engine: a Hardware Accelerator IP for 21.6 fJ/op Binary Neural Network Inference
Binary Neural Networks (BNNs) are promising to deliver accuracy comparable to
conventional deep neural networks at a fraction of the cost in terms of memory
and energy. In this paper, we introduce the XNOR Neural Engine (XNE), a fully
digital configurable hardware accelerator IP for BNNs, integrated within a
microcontroller unit (MCU) equipped with an autonomous I/O subsystem and hybrid
SRAM / standard cell memory. The XNE is able to fully compute convolutional and
dense layers in autonomy or in cooperation with the core in the MCU to realize
more complex behaviors. We show post-synthesis results in 65nm and 22nm
technology for the XNE IP and post-layout results in 22nm for the full MCU
indicating that this system can drop the energy cost per binary operation to
21.6fJ per operation at 0.4V, and at the same time is flexible and performant
enough to execute state-of-the-art BNN topologies such as ResNet-34 in less
than 2.2mJ per frame at 8.9 fps.Comment: 11 pages, 8 figures, 2 tables, 3 listings. Accepted for presentation
at CODES'18 and for publication in IEEE Transactions on Computer-Aided Design
of Circuits and Systems (TCAD) as part of the ESWEEK-TCAD special issu
Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions
Massive MIMO is a compelling wireless access concept that relies on the use
of an excess number of base-station antennas, relative to the number of active
terminals. This technology is a main component of 5G New Radio (NR) and
addresses all important requirements of future wireless standards: a great
capacity increase, the support of many simultaneous users, and improvement in
energy efficiency. Massive MIMO requires the simultaneous processing of signals
from many antenna chains, and computational operations on large matrices. The
complexity of the digital processing has been viewed as a fundamental obstacle
to the feasibility of Massive MIMO in the past. Recent advances on
system-algorithm-hardware co-design have led to extremely energy-efficient
implementations. These exploit opportunities in deeply-scaled silicon
technologies and perform partly distributed processing to cope with the
bottlenecks encountered in the interconnection of many signals. For example,
prototype ASIC implementations have demonstrated zero-forcing precoding in real
time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing
of 8 terminals). Coarse and even error-prone digital processing in the antenna
paths permits a reduction of consumption with a factor of 2 to 5. This article
summarizes the fundamental technical contributions to efficient digital signal
processing for Massive MIMO. The opportunities and constraints on operating on
low-complexity RF and analog hardware chains are clarified. It illustrates how
terminals can benefit from improved energy efficiency. The status of technology
and real-life prototypes discussed. Open challenges and directions for future
research are suggested.Comment: submitted to IEEE transactions on signal processin
X-SRAM: Enabling In-Memory Boolean Computations in CMOS Static Random Access Memories
Silicon-based Static Random Access Memories (SRAM) and digital Boolean logic
have been the workhorse of the state-of-art computing platforms. Despite
tremendous strides in scaling the ubiquitous metal-oxide-semiconductor
transistor, the underlying \textit{von-Neumann} computing architecture has
remained unchanged. The limited throughput and energy-efficiency of the
state-of-art computing systems, to a large extent, results from the well-known
\textit{von-Neumann bottleneck}. The energy and throughput inefficiency of the
von-Neumann machines have been accentuated in recent times due to the present
emphasis on data-intensive applications like artificial intelligence, machine
learning \textit{etc}. A possible approach towards mitigating the overhead
associated with the von-Neumann bottleneck is to enable \textit{in-memory}
Boolean computations. In this manuscript, we present an augmented version of
the conventional SRAM bit-cells, called \textit{the X-SRAM}, with the ability
to perform in-memory, vector Boolean computations, in addition to the usual
memory storage operations. We propose at least six different schemes for
enabling in-memory vector computations including NAND, NOR, IMP (implication),
XOR logic gates with respect to different bit-cell topologies the 8T cell
and the 8T Differential cell. In addition, we also present a novel
\textit{`read-compute-store'} scheme, wherein the computed Boolean function can
be directly stored in the memory without the need of latching the data and
carrying out a subsequent write operation. The feasibility of the proposed
schemes has been verified using predictive transistor models and Monte-Carlo
variation analysis.Comment: This article has been accepted in a future issue of IEEE Transactions
on Circuits and Systems-I: Regular Paper
Always-On 674uW @ 4GOP/s Error Resilient Binary Neural Networks with Aggressive SRAM Voltage Scaling on a 22nm IoT End-Node
Binary Neural Networks (BNNs) have been shown to be robust to random
bit-level noise, making aggressive voltage scaling attractive as a power-saving
technique for both logic and SRAMs. In this work, we introduce the first fully
programmable IoT end-node system-on-chip (SoC) capable of executing
software-defined, hardware-accelerated BNNs at ultra-low voltage. Our SoC
exploits a hybrid memory scheme where error-vulnerable SRAMs are complemented
by reliable standard-cell memories to safely store critical data under
aggressive voltage scaling. On a prototype in 22nm FDX technology, we
demonstrate that both the logic and SRAM voltage can be dropped to 0.5Vwithout
any accuracy penalty on a BNN trained for the CIFAR-10 dataset, improving
energy efficiency by 2.2X w.r.t. nominal conditions. Furthermore, we show that
the supply voltage can be dropped to 0.42V (50% of nominal) while keeping more
than99% of the nominal accuracy (with a bit error rate ~1/1000). In this
operating point, our prototype performs 4Gop/s (15.4Inference/s on the CIFAR-10
dataset) by computing up to 13binary ops per pJ, achieving 22.8 Inference/s/mW
while keeping within a peak power envelope of 674uW - low enough to enable
always-on operation in ultra-low power smart cameras, long-lifetime
environmental sensors, and insect-sized pico-drones.Comment: Submitted to ISICAS2020 journal special issu
- …