Consistent estimates of gross primary production of Finnish forests : comparison of estimates of two process models

201

Airborne and Terrestrial Laser Scanning Data for the Assessment of Standing and Lying Deadwood: Current Situation and New Perspectives

LiDAR technology is finding uses in the forest sector, not only for surveys in producing forests but also as a tool to gain a deeper understanding of the importance of the three-dimensional component of forest environments. Developments of platforms and sensors in the last decades have highlighted the capacity of this technology to catch relevant details, even at finer scales. This drives its usage towards more ecological topics and applications for forest management. In recent years, nature protection policies have been focusing on deadwood as a key element for the health of forest ecosystems and wide-scale assessments are necessary for the planning process on a landscape scale. Initial studies showed promising results in the identification of bigger deadwood components (e.g., snags, logs, stumps), employing data not specifically collected for the purpose. Nevertheless, many efforts should still be made to transfer the available methodologies to an operational level. Newly available platforms (e.g., Mobile Laser Scanner) and sensors (e.g., Multispectral Laser Scanner) might provide new opportunities for this field of study in the near future

Spatial distribution of forest aboveground biomass estimated from remote sensing and forest inventory data in New England, USA.

Abstract We combined satellite (Landsat 7 and Moderate Resolution Imaging Spectrometer) and U.S. Department of Agriculture forest inventory and analysis (FIA) data to estimate forest aboveground biomass (AGB) across New England, USA. This is practical for large-scale carbon studies and may reduce uncertainty of AGB estimates. We estimate that total regional forest AGB was 1,867 teragram (1012, dry weight) in 2001, with a mean AGB density of 120 Mg/ha (Standard deviation = 54 Mg/ha) ranging from 15 to 240 Mg/ha within a 95% percentile. The majority of regional AGB density was in the range of 80 to 160 Mg/ha (58.2%). High AGB densities were observed along the Appalachian Mountains from northwestern Connecticut to the Green Mountains in Vermont and White Mountains in New Hampshire, while low AGB densities were concentrated in the Downeast area of Maine (ME) and the Cape Cod area of Massachusetts (MA). At the state level, the averaged difference in mean AGB densities between simulated and FIA (as reference) was -2.0% ranging from 0% to -4.2% with a standard error of 3.2%. Within the 95% confidence interval the differences between FIA and simulated AGB densities ranged from 0 to 6% (absolute value). Our study may provide useful information for regional fuel-loading estimates

Peatland leaf-area index and biomass estimation with ultra-high resolution remote sensing

There is fine-scale spatial heterogeneity in key vegetation properties including leaf-area index (LAI) and biomass in treeless northern peatlands, and hyperspectral drone data with high spatial and spectral resolution could detect the spatial patterns with high accuracy. However, the advantage of hyperspectral drone data has not been tested in a multi-source remote sensing approach (i.e. inclusion of multiple different remote sensing datatypes); and overall, sub-meter-level leaf-area index (LAI) and biomass maps have largely been absent. We evaluated the detectability of LAI and biomass patterns at a northern boreal fen (Halssiaapa) in northern Finland with multi-temporal and multi-source remote sensing data and assessed the benefit of hyperspectral drone data. We measured vascular plant percentage cover and height as well as moss cover in 140 field plots and connected the structural information to measured aboveground vascular LAI and biomass and moss biomass with linear regressions. We predicted both total and plant functional type (PFT) specific LAI and biomass patterns with random forests regressions with predictors including RGB and hyperspectral drone (28 bands in a spectral range of 500-900 nm), aerial and satellite imagery as well as topography and vegetation height information derived from structure-from-motion drone photogrammetry and aerial lidar data. The modeling performance was between moderate and good for total LAI and biomass (mean explained variance between 49.8 and 66.5%) and variable for PFTs (0.3-61.6%). Hyperspectral data increased model performance in most of the regressions, usually relatively little, but in some of the regressions, the inclusion of hyperspectral data even decreased model performance (change in mean explained variance between -14.5 and 9.1%-points). The most important features in regressions included drone topography, vegetation height, hyperspectral and RGB features. The spatial patterns and landscape estimates of LAI and biomass were quite similar in regressions with or without hyperspectral data, in particular for moss and total biomass. The results suggest that the fine-scale spatial patterns of peatland LAI and biomass can be detected with multi-source remote sensing data, vegetation mapping should include both spectral and topographic predictors at sub-meter-level spatial resolution and that hyperspectral imagery gives only slight benefits.Peer reviewe

Very High Spatial Resolution Soil Moisture Observation of Heterogeneous Subarctic Catchment Using Nonlocal Averaging and Multitemporal SAR Data

A soil moisture estimation method was developed for Sentinel-1 synthetic aperture radar (SAR) ground range detected high resolution (GRDH) data to analyze moisture conditions in a gently undulating and heterogeneous subarctic area containing forests, wetlands, and open orographic tundra. In order to preserve the original 10-m pixel spacing, PIMSAR (pixel-based multitemporal nonlocal averaging) nonlocal mean filtering was applied. It was guided by multitemporal statistics of SAR images in the area. The gradient boosted trees (GBT) machine learning method was used for the soil moisture algorithm development. Discrete and continuous in situ soil moisture values were used for training and validation of the algorithm. For surface soil moisture, the root mean square error (RMSE) of the method was 6.5% and 8.8% for morning and evening images, respectively. The corresponding maximum errors were 34.1% and 33.8%. The pixelwise sensitivity to the training set and method choice was estimated as the variance of the soil moisture values derived using the algorithms for the three best methods with respect to the criteria: the smallest maximum error, the smallest RMSE value, and the highest coefficient of determination (R-2) value. It was, on average, 6.3% with a standard deviation of 5.7%. Our approach successfully produced instantaneous high-resolution soil moisture estimates on daily basis for the subarctic landscape and can further be applied to various hydrological, biogeochemical, and management purposes.Peer reviewe

Quantitative analysis of the links between forest structure and land surface albedo on a global scale

Forests are critical in regulating climate by altering the Earth's surface albedo. Therefore, there is an urgent need to enhance our knowledge about the effects of forest structure on albedo. Here, we present a global assessment of the links between forest structure and albedo at a 1-km spatial resolution using generalized additive models (GAMs). We used remotely sensed data to obtain variables representing forest structure, including forest density, leaf area index, and tree cover, during the peak growing season in 2005 with pure forest pixels that cover similar to 7% of the Earth's surface. Furthermore, we estimated black-sky albedo at a solar zenith angle of 38 degrees using the most recent collection of the moderate resolution imaging spectroradiometer (MODIS; version 6) at shortwave, near-infrared, and visible spectral regions. In addition, for the first time, we mapped the magnitude of the relationship between forest structure and albedo at each pixel with a 0.5-degree spatial resolution. Our results suggested that forest structure may modulate albedo in most of the sub-biomes. The response of shortwave albedo was always positive to the leaf area index and negative to the tree cover (except for deciduous broadleaf forests in mediterranean and temperate regions), while the response to forest density varied across space in 2005. The spatial map affirmed that the links between forest structure and albedo vary over geographical locations. In sum, our study emphasized the importance of forest structure in the surface albedo regulation. This paper provides the first spatially explicit evidence of the magnitude of relationships between forest structure and albedo on a global scale.Peer reviewe

Very High Spatial Resolution Soil Moisture Observation of Heterogeneous Subarctic Catchment Using Nonlocal Averaging and Multitemporal SAR Data

A soil moisture estimation method was developed for Sentinel-1 synthetic aperture radar (SAR) ground range detected high resolution (GRDH) data to analyze moisture conditions in a gently undulating and heterogeneous subarctic area containing forests, wetlands, and open orographic tundra. In order to preserve the original 10-m pixel spacing, PIMSAR (pixel-based multitemporal nonlocal averaging) nonlocal mean filtering was applied. It was guided by multitemporal statistics of SAR images in the area. The gradient boosted trees (GBT) machine learning method was used for the soil moisture algorithm development. Discrete and continuous in situ soil moisture values were used for training and validation of the algorithm. For surface soil moisture, the root mean square error (RMSE) of the method was 6.5% and 8.8% for morning and evening images, respectively. The corresponding maximum errors were 34.1% and 33.8%. The pixelwise sensitivity to the training set and method choice was estimated as the variance of the soil moisture values derived using the algorithms for the three best methods with respect to the criteria: the smallest maximum error, the smallest RMSE value, and the highest coefficient of determination (R-2) value. It was, on average, 6.3% with a standard deviation of 5.7%. Our approach successfully produced instantaneous high-resolution soil moisture estimates on daily basis for the subarctic landscape and can further be applied to various hydrological, biogeochemical, and management purposes.Peer reviewe

Trafficability Prediction Using Depth-to-Water Maps : the Status of Application in Northern and Central European Forestry

DOI 10.1007/s40725-022-00159-w CorrectionPurpose of Review Mechanized logging operations with ground-based equipment commonly represent European production forestry but are well-known to potentially cause soil impacts through various forms of soil disturbances, especially on wet soils with low bearing capacity. In times of changing climate, with shorter periods of frozen soils, heavy rain fall events in spring and autumn and frequent needs for salvage logging, forestry stakeholders face increasingly unfavourable conditions to conduct low-impact operations. Thus, more than ever, planning tools such as trafficability maps are required to ensure efficient forest operations at reduced environmental impact. This paper aims to describe the status quo of existence and implementation of such tools applied in forest operations across Europe. In addition, focus is given to the availability and accessibility of data relevant for such predictions. Recent Findings A commonly identified method to support the planning and execution of machine-based operations is given by the prediction of areas with low bearing capacity due to wet soil conditions. Both the topographic wetness index (TWI) and the depth-to-water algorithm (DTW) are used to identify wet areas and to produce trafficability maps, based on spatial information. Summary The required input data is commonly available among governmental institutions and in some countries already further processed to have topography-derived trafficability maps and respective enabling technologies at hand. Particularly the Nordic countries are ahead within this process and currently pave the way to further transfer static trafficability maps into dynamic ones, including additional site-specific information received from detailed forest inventories. Yet, it is hoped that a broader adoption of these information by forest managers throughout Europe will take place to enhance sustainable forest operations.Peer reviewe

Trafficability Prediction Using Depth-to-Water Maps : the Status of Application in Northern and Central European Forestry

DOI 10.1007/s40725-022-00159-w CorrectionPurpose of Review Mechanized logging operations with ground-based equipment commonly represent European production forestry but are well-known to potentially cause soil impacts through various forms of soil disturbances, especially on wet soils with low bearing capacity. In times of changing climate, with shorter periods of frozen soils, heavy rain fall events in spring and autumn and frequent needs for salvage logging, forestry stakeholders face increasingly unfavourable conditions to conduct low-impact operations. Thus, more than ever, planning tools such as trafficability maps are required to ensure efficient forest operations at reduced environmental impact. This paper aims to describe the status quo of existence and implementation of such tools applied in forest operations across Europe. In addition, focus is given to the availability and accessibility of data relevant for such predictions. Recent Findings A commonly identified method to support the planning and execution of machine-based operations is given by the prediction of areas with low bearing capacity due to wet soil conditions. Both the topographic wetness index (TWI) and the depth-to-water algorithm (DTW) are used to identify wet areas and to produce trafficability maps, based on spatial information. Summary The required input data is commonly available among governmental institutions and in some countries already further processed to have topography-derived trafficability maps and respective enabling technologies at hand. Particularly the Nordic countries are ahead within this process and currently pave the way to further transfer static trafficability maps into dynamic ones, including additional site-specific information received from detailed forest inventories. Yet, it is hoped that a broader adoption of these information by forest managers throughout Europe will take place to enhance sustainable forest operations.Peer reviewe