Modeling and Robust Control of Flying Robots Using Intelligent Approaches Modélisation et commande robuste des robots volants en utilisant des approches intelligentes

This thesis aims to modeling and robust controlling of a flying robot of quadrotor type. Where we focused in this thesis on quadrotor unmanned Aerial Vehicle (QUAV). Intelligent nonlinear controllers and intelligent fractional-order nonlinear controllers are designed to control. The QUAV system is considered as MIMO large-scale system that can be divided on six interconnected single-input–single-output (SISO) subsystems, which define one DOF, i.e., three-angle subsystems with three position subsystems. In addition, nonlinear models is considered and assumed to suffer from the incidence of parameter uncertainty. Every parameters such as mass, inertia of the system are assumed completely unknown and change over time without prior information. Next, basing on nonlinear, Fractional-Order nonlinear and the intelligent adaptive approximate techniques a control law is established for all subsystems. The stability is performed by Lyapunov method and getting the desired output with respect to the desired input. The modeling and control is done using MATLAB/Simulink. At the end, the simulation tests are performed to that, the designed controller is able to maintain best performance of the QUAV even in the presence of unknown dynamics, parametric uncertainties and external disturbance

Hybrid active force control for fixed based rotorcraft

Disturbances are considered major challenges faced in the deployment of rotorcraft unmanned aerial vehicle (UAV) systems. Among different types of rotorcraft systems, the twin-rotor helicopter and quadrotor models are considered the most versatile flying machines nowadays due to their range of applications in the civilian and military sectors. However, these systems are multivariate and highly non-linear, making them difficult to be accurately controlled. Their performance could be further compromised when they are operated in the presence of disturbances or uncertainties. This dissertation presents an innovative hybrid control scheme for rotorcraft systems to improve disturbance rejection capability while maintaining system stability, based on a technique called active force control (AFC) via simulation and experimental works. A detailed dynamic model of each aerial system was derived based on the Euler–Lagrange and Newton-Euler methods, taking into account various assumptions and conditions. As a result of the derived models, a proportional-integral-derivative (PID) controller was designed to achieve the required altitude and attitude motions. Due to the PID's inability to reject applied disturbances, the AFC strategy was incorporated with the designed PID controller, to be known as the PID-AFC scheme. To estimate control parameters automatically, a number of artificial intelligence algorithms were employed in this study, namely the iterative learning algorithm and fuzzy logic. Intelligent rules of these AI algorithms were designed and embedded into the AFC loop, identified as intelligent active force control (IAFC)-based methods. This involved, PID-iterative learning active force control (PID-ILAFC) and PID-fuzzy logic active force control (PID-FLAFC) schemes. To test the performance and robustness of these proposed hybrid control systems, several disturbance models were introduced, namely the sinusoidal wave, pulsating, and Dryden wind gust model disturbances. Integral square error was selected as the index performance to compare between the proposed control schemes. In this study, the effectiveness of the PID-ILAFC strategy in connection with the body jerk performance was investigated in the presence of applied disturbance. In terms of experimental work, hardware-in-the-loop (HIL) experimental tests were conducted for a fixed-base rotorcraft UAV system to investigate how effective are the proposed hybrid PID-ILAFC schemes in disturbance rejection. Simulated results, in time domains, reveal the efficacy of the proposed hybrid IAFC-based control methods in the cancellation of different applied disturbances, while preserving the stability of the rotorcraft system, as compared to the conventional PID controller. In most of the cases, the simulated results show a reduction of more than 55% in settling time. In terms of body jerk performance, it was improved by around 65%, for twin-rotor helicopter system, and by a 45%, for quadrotor system. To achieve the best possible performance, results recommend using the full output signal produced by the AFC strategy according to the sensitivity analysis. The HIL experimental tests results demonstrate that the PID-ILAFC method can improve the disturbance rejection capability when compared to other control systems and show good agreement with the simulated counterpart. However, the selection of the appropriate learning parameters and initial conditions is viewed as a crucial step toward this improved performance

Development of Self-Learning Type-2 Fuzzy Systems for System Identification and Control of Autonomous Systems

Modelling and control of dynamic systems are faced by multiple technical challenges, mainly due to the nature of uncertain complex, nonlinear, and time-varying systems. Traditional modelling techniques require a complete understanding of system dynamics and obtaining comprehensive mathematical models is not always achievable due to limited knowledge of the systems as well as the presence of multiple uncertainties in the environment. As universal approximators, fuzzy logic systems (FLSs), neural networks (NNs) and neuro-fuzzy systems have proved to be successful computational tools for representing the behaviour of complex dynamical systems. Moreover, FLSs, NNs and learning-based techniques have been gaining popularity for controlling complex, ill-defined, nonlinear, and time-varying systems in the face of uncertainties. However, fuzzy rules derived by experts can be too ad-hoc, and the performance is less than optimum. In other words, generating fuzzy rules and membership functions in fuzzy systems is a potential challenge especially for systems with many variables. Moreover, under the umbrella of FLSs, although type-1 fuzzy logic control systems (T1-FLCs) have been applied to control various complex nonlinear systems, they have limited capability to handle uncertainties. Aiming to accommodate uncertainties, type-2 fuzzy logic control systems (T2-FLCs) were established. This thesis aims to address the shortcomings of existing fuzzy techniques by utilisation of type-2 FLCs with novel adaptive capabilities. The first contribution of this thesis is a novel online system identification technique by means of a recursive interval type-2 Takagi-Sugeno fuzzy C-means clustering technique (IT2-TS-FC) to accommodate the footprint-of-uncertainties (FoUs). This development is meant to specifically address the shortcomings of type-1 fuzzy systems in capturing the footprint-of-uncertainties such as mechanical wear, rotor damage, battery drain and sensor and actuator faults. Unlike previous type-2 TS fuzzy models, the proposed method constructs two fuzzifiers (upper and lower) and two regression coefficients in the consequent part to handle uncertainties. The weighted least square method is employed to compute the regression coefficients. The proposed method is validated using two benchmarks, namely, real flight test data of a quadcopter drone and Mackey-Glass time series data. The algorithm has the capability to model uncertainties (e.g., noisy dataset). The second contribution of this thesis is the development of a novel self-adaptive interval type-2 fuzzy controller named the SAF2C for controlling multi-input multi-output (MIMO) nonlinear systems. The adaptation law is derived using sliding mode control (SMC) theory to reduce the computation time so that the learning process can be expedited by 80% compared to separate single-input single-output (SISO) controllers. The system employs the `Enhanced Iterative Algorithm with Stop Condition' (EIASC) type-reduction method, which is more computationally efficient than the `Karnik-Mendel' type-reduction algorithm. The stability of the SAF2C is proven using the Lyapunov technique. To ensure the applicability of the proposed control scheme, SAF2C is implemented to control several dynamical systems, including a simulated MIMO hexacopter unmanned aerial vehicle (UAV) in the face of external disturbance and parameter variations. The ability of SAF2C to filter the measurement noise is demonstrated, where significant improvement is obtained using the proposed controller in the face of measurement noise. Also, the proposed closed-loop control system is applied to control other benchmark dynamic systems (e.g., a simulated autonomous underwater vehicle and inverted pendulum on a cart system) demonstrating high accuracy and robustness to variations in system parameters and external disturbance. Another contribution of this thesis is a novel stand-alone enhanced self-adaptive interval type-2 fuzzy controller named the ESAF2C algorithm, whose type-2 fuzzy parameters are tuned online using the SMC theory. This way, we expect to design a computationally efficient adaptive Type-2 fuzzy system, suitable for real-time applications by introducing the EIASC type-reducer. The proposed technique is applied on a quadcopter UAV (QUAV), where extensive simulations and real-time flight tests for a hovering QUAV under wind disturbances are also conducted to validate the efficacy of the ESAF2C. Specifically, the control performance is investigated in the face of external wind gust disturbances, generated using an industrial fan. Stability analysis of the ESAF2C control system is investigated using the Lyapunov theory. Yet another contribution of this thesis is the development of a type-2 evolving fuzzy control system (T2-EFCS) to facilitate self-learning (either from scratch or from a certain predefined rule). T2-EFCS has two phases, namely, the structure learning and the parameters learning. The structure of T2-EFCS does not require previous information about the fuzzy structure, and it can start the construction of its rules from scratch with only one rule. The rules are then added and pruned in an online fashion to achieve the desired set-point. The proposed technique is applied to control an unmanned ground vehicle (UGV) in the presence of multiple external disturbances demonstrating the robustness of the proposed control systems. The proposed approach turns out to be computationally efficient as the system employs fewer fuzzy parameters while maintaining superior control performance

Nonlinear Controller Design for UAVs with Time-Varying Aerodynamic Uncertainties

Unmanned Aerial Vehicles (UAVs) are here and they are here to stay. Unmanned Aviation has expanded significantly in recent years and research and development in the field of navigation and control have advanced beyond expectations. UAVs are currently being used for defense programs around the world but the range of applications is expected to grow in the near future, with civilian applications such as environmental and aerial monitoring, aerial surveillance and homeland security being some representative examples. Conventional and commercially available small-scale UAVs have limited utilization and applicability to executing specific short-duration missions because of limitations in size, payload, power supply and endurance. This fact has already marked the dawn of a new era of more powerful and versatile UAVs (e.g. morphing aircraft), able to perform a variety of missions. This dissertation presents a novel, comprehensive, step-by-step, nonlinear controller design framework for new generation, non-conventional UAVs with time-varying aerodynamic characteristics during flight. Controller design for such UAVs is a challenging task mainly due to uncertain aerodynamic parameters in the UAV mathematical model. This challenge is tackled by using and implementing μ-analysis and additive uncertainty weighting functions. The technique described herein can be generalized and applied to the class of non-conventional UAVs, seeking to address uncertainty challenges regarding the aircraft\u27s aerodynamic coefficients

Adaptive backstepping controller design of quadrotor biplane for payload delivery

Performance of the UAVs for a particular application can be enhanced by hybrid design, where take-off, hover, and landing happen like rotary-wing UAVs, and flies like fixed-wing UAVs. A backstepping controller and an adaptive backstepping controller are designed for trajectory tracking and payload delivery in a medical emergency or medical substance delivery like vaccine delivery in the presence of wind gust. Simulation results show that the backstepping controller effectively tracks the trajectory during the entire flight envelope, including take-off, hovering, the transition phase, level flight mode, and landing. A comparison between Backstepping, Integral Terminal Sliding Mode (ITSMC) and Adaptive Backstepping controllers for payload delivery show that the adaptive backstepping controller effectively tracks the altitude and attitude. ITSMC is capable of tracking the desired trajectory for a change in the mass but has sluggish response. The backstepping controller generates a steady-state error in altitude during the mass change in biplane-quadrotor.The publication of this article was funded by Qatar National Library.Scopu

Robust Control Methods for Nonlinear Systems with Uncertain Dynamics and Unknown Control Direction

Robust nonlinear control design strategies using sliding mode control (SMC) and integral SMC (ISMC) are developed, which are capable of achieving reliable and accurate tracking control for systems containing dynamic uncertainty, unmodeled disturbances, and actuator anomalies that result in an unknown and time-varying control direction. In order to ease readability of this dissertation, detailed explanations of the relevant mathematical tools is provided, including stability denitions, Lyapunov-based stability analysis methods, SMC and ISMC fundamentals, and other basic nonlinear control tools. The contributions of the dissertation are three novel control algorithms for three different classes of nonlinear systems: single-input multipleoutput (SIMO) systems, systems with model uncertainty and bounded disturbances, and systems with unknown control direction. Control design for SIMO systems is challenging due to the fact that such systems have fewer actuators than degrees of freedom to control (i.e., they are underactuated systems). While traditional nonlinear control methods can be utilized to design controllers for certain classes of cascaded underactuated systems, more advanced methods are required to develop controllers for parallel systems, which are not in a cascade structure. A novel control technique is proposed in this dissertation, which is shown to achieve asymptotic tracking for dual parallel systems, where a single scalar control input directly affects two subsystems. The result is achieved through an innovative sequential control design algorithm, whereby one of the subsystems is indirectly stabilized via the desired state trajectory that is commanded to the other subsystem. The SIMO system under consideration does not contain uncertainty or disturbances. In dealing with systems containing uncertainty in the dynamic model, a particularly challenging situation occurs when uncertainty exists in the input-multiplicative gain matrix. Moreover, special consideration is required in control design for systems that also include unknown bounded disturbances. To cope with these challenges, a robust continuous controller is developed using an ISMC technique, which achieves asymptotic trajectory tracking for systems with unknown bounded disturbances, while simultaneously compensating for parametric uncertainty in the input gain matrix. The ISMC design is rigorously proven to achieve asymptotic trajectory tracking for a quadrotor system and a synthetic jet actuator (SJA)-based aircraft system. In the ISMC designs, it is assumed that the signs in the uncertain input-multiplicative gain matrix (i.e., the actuator control directions) are known. A much more challenging scenario is encountered in designing controllers for classes of systems, where the uncertainty in the input gain matrix is extreme enough to result in an a priori-unknown control direction. Such a scenario can result when dealing with highly inaccurate dynamic models, unmodeled parameter variations, actuator anomalies, unknown external or internal disturbances, and/or other adversarial operating conditions. To address this challenge, a SMCbased self-recongurable control algorithm is presented, which automatically adjusts for unknown control direction via periodic switching between sliding manifolds that ultimately forces the state to a converging manifold. Rigorous mathematical analyses are presented to prove the theoretical results, and simulation results are provided to demonstrate the effectiveness of the three proposed control algorithms

Aerial Vehicles

This book contains 35 chapters written by experts in developing techniques for making aerial vehicles more intelligent, more reliable, more flexible in use, and safer in operation.It will also serve as an inspiration for further improvement of the design and application of aeral vehicles. The advanced techniques and research described here may also be applicable to other high-tech areas such as robotics, avionics, vetronics, and space

Fault Tolerant Super Twisting Sliding Mode Control of a Quadrotor UAV Using Control Allocation

In this study, a fault-tolerant super-twisting sliding mode controller with a control allocation system for a quadrotor aircraft is proposed. Super twisting sliding mode control is a robust control technique that handles a system with a relative degree equal to one. A super-twisting sliding mode controller is proposed because of its robustness to uncertainties and perturbations. It increases accuracy and reduces chattering. A control allocation algorithm is developed to cope with the actuator fault. Firstly, a nonlinear model of the quadrotor unmanned aerial vehicle (UAV) is presented. Then, the controller design and type of the actuator fault are explained. The control allocation algorithm is used to optimize the trajectory tracking performance of the quadrotor in the presence of an actuator fault. A control allocation algorithm is an effective approach to implementing fault-tolerant control. When actuator faults are identified, they can be modeled as changes in the B matrix of constraints. Various simulations have been made for situations with and without actuator failure. In normal conditions, the quadrotor can accurately track altitude, roll, pitch and yaw references. In faulty conditions, the quadrotor can follow the references with a small error. Simulations prove the effectiveness of the control allocation algorithm, which stabilizes the quadrotor in case of an actuator fault. Overall, this paper presents a novel fault-tolerant controller design for quadrotor aircraft that effectively addresses actuator faults using a super-twisting sliding mode controller and control allocation algorithm

Development of advanced autonomous learning algorithms for nonlinear system identification and control

Identification of nonlinear dynamical systems, data stream analysis, etc. is usually handled by autonomous learning algorithms like evolving fuzzy and evolving neuro-fuzzy systems (ENFSs). They are characterized by the single-pass learning mode and open structure-property. Such features enable their effective handling of fast and rapidly changing natures of data streams. The underlying bottleneck of ENFSs lies in its design principle, which involves a high number of free parameters (rule premise and rule consequent) to be adapted in the training process. This figure can even double in the case of the type-2 fuzzy system. From this literature gap, a novel ENFS, namely Parsimonious Learning Machine (PALM) is proposed in this thesis. To reduce the number of network parameters significantly, PALM features utilization of a new type of fuzzy rule based on the concept of hyperplane clustering, where it has no rule premise parameters. PALM is proposed in both type-1 and type-2 fuzzy systems where all of them characterize a fully dynamic rule-based system. Thus, it is capable of automatically generating, merging, and tuning the hyperplane-based fuzzy rule in a single-pass manner. Moreover, an extension of PALM, namely recurrent PALM (rPALM), is proposed and adopts the concept of teacher-forcing mechanism in the deep learning literature. The efficacy of both PALM and rPALM have been evaluated through numerical study with data streams and to identify nonlinear unmanned aerial vehicle system. The proposed models showcase significant improvements in terms of computational complexity and the number of required parameters against several renowned ENFSs while attaining comparable and often better predictive accuracy. The ENFSs have also been utilized to develop three autonomous intelligent controllers (AICons) in this thesis. They are namely Generic (G) controller, Parsimonious controller (PAC), and Reduced Parsimonious Controller (RedPAC). All these controllers start operating from scratch with an empty set of fuzzy rules, and no offline training is required. To cope with the dynamic behavior of the plant, these controllers can add, merge or prune the rules on demand. Among three AICons, the G-controller is built by utilizing an advanced incremental learning machine, namely Generic Evolving Neuro-Fuzzy Inference System. The integration of generalized adaptive resonance theory provides a compact structure of the G-controller. Consequently, the faster evolution of structure is witnessed, which lowers its computational cost. Another AICon namely, PAC is rooted with PALM's architecture. Since PALM has a dependency on user-defined thresholds to adapt the structure, these thresholds are replaced with the concept of bias- variance trade-off in PAC. In RedPAC, the network parameters have further reduced in contrast with PALM-based PAC, where the number of consequent parameters has reduced to one parameter per rule. These AICons work with very minor expert domain knowledge and developed by incorporating the sliding mode control technique. In G-controller and RedPAC, the control law and adaptation laws for the consequent parameters are derived from the SMC algorithm to establish a stable closed-loop system, where the stability of these controllers are guaranteed by using the Lyapunov function and the uniform asymptotic convergence of tracking error to zero is witnessed through the implication of an auxiliary robustifying control term. While using PAC, the boundedness and convergence of the closed-loop control system's tracking error and the controller's consequent parameters are confirmed by utilizing the LaSalle-Yoshizawa theorem. Their efficacy is evaluated by observing various trajectory tracking performance of unmanned aerial vehicles. The accuracy of these controllers is comparable or better than the benchmark controllers where the proposed controllers incur significantly fewer parameters to attain similar or better tracking performance

Robust Control of Vectored Thrust Aerial Vehicles via Variable Structure Control Methods

The popularity of Unmanned Aerial Vehicles (UAVs) has grown rapidly in many civil and military applications in the last few decades. Recent UAV applications include crop monitoring, terrain mapping and aerial photography, where one or several image sensors attached to the UAV provide important terrain information. A thrust vectoring aerial vehicle, a vehicle with the ability to change the direction of thrust generated while keeping the UAV body at a zero roll and pitch orientation, can serve well in such applications by allowing the sensors to capture stable image data without additional gimbals, reducing the payload and cost while increasing the flight endurance. Furthermore, thrust vectoring UAVs can perform fast forward flight as well as hover operations with non-zero pitch: features which can serve well in military applications. The first part of this research focuses on developing a comprehensive dynamic model and a low level attitude and position control structure for a tri-rotor UAV with thrust vectoring capability, namely the Vectored Thrust Aerial Vehicle. Nonlinear dynamics of UAVs require robust control methods to realize stable flight. Special attention needs to be given to wind gust disturbances, and parametric uncertainties. Sliding Mode Control , a type of Variable Structure Controller, has served well over the years in controlling UAVs and other dynamic systems. However, conventional Sliding Mode Control results in a high frequency switching behavior of the control signal. Furthermore, Sliding Mode Control does not focus on fast set-point regulation or tracking, which can be advantageous for UAVs and many other robotic systems. Taking these research gaps into account, this work presents an Adaptive Variable Structure Control method, which can acquire fast set-point regulation while maintaining robustness against external disturbances and uncertainties. The adaptive algorithm developed in this work is fundamentally different from current Adaptive Sliding Mode Control and other Variable Structure methods. Simulation and experimental results are provided to demonstrate the superiority of the proposed approach compared to Sliding Mode Control. The novel adaptive algorithm is applicable to many nonlinear dynamic systems including UAVs, robot arm manipulators and space robots. The same adaptive concept is then utilized to develop an Adaptive Second Order Sliding Mode Controller. Compared to existing Second Order Sliding Mode Control methods, the proposed methodology is able to produce reduced sliding manifold reach times and consume less amount of control resources: features which are particularly advantageous for systems with limited control resources. Simulations are conducted to evaluate the performance of the proposed Adaptive Second Order Sliding Mode Control algorithm