Image enhancement using fuzzy intensity measure and adaptive clipping histogram equalization

Image enhancement aims at processing an input image so that the visual content of the output image is more pleasing or more useful for certain applications. Although histogram equalization is widely used in image enhancement due to its simplicity and effectiveness, it changes the mean brightness of the enhanced image and introduces a high level of noise and distortion. To address these problems, this paper proposes image enhancement using fuzzy intensity measure and adaptive clipping histogram equalization (FIMHE). FIMHE uses fuzzy intensity measure to first segment the histogram of the original image, and then clip the histogram adaptively in order to prevent excessive image enhancement. Experiments on the Berkeley database and CVF-UGR-Image database show that FIMHE outperforms state-of-the-art histogram equalization based methods

Towards the text compression based feature extraction in high impedance fault detection

High impedance faults of medium voltage overhead lines with covered conductors can be identified by the presence of partial discharges. Despite it is a subject of research for more than 60 years, online partial discharges detection is always a challenge, especially in environment with heavy background noise. In this paper, a new approach for partial discharge pattern recognition is presented. All results were obtained on data, acquired from real 22 kV medium voltage overhead power line with covered conductors. The proposed method is based on a text compression algorithm and it serves as a signal similarity estimation, applied for the first time on partial discharge pattern. Its relevancy is examined by three different variations of classification model. The improvement gained on an already deployed model proves its quality.Web of Science1211art. no. 214

Harnessing machine learning for fiber-induced nonlinearity mitigation in long-haul coherent optical OFDM

© 2018 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).Coherent optical orthogonal frequency division multiplexing (CO-OFDM) has attracted a lot of interest in optical fiber communications due to its simplified digital signal processing (DSP) units, high spectral-efficiency, flexibility, and tolerance to linear impairments. However, CO-OFDM’s high peak-to-average power ratio imposes high vulnerability to fiber-induced non-linearities. DSP-based machine learning has been considered as a promising approach for fiber non-linearity compensation without sacrificing computational complexity. In this paper, we review the existing machine learning approaches for CO-OFDM in a common framework and review the progress in this area with a focus on practical aspects and comparison with benchmark DSP solutions.Peer reviewe

A robust approach for acoustic noise suppression in speech using ANFIS

The authors of this article deals with the implementation of a combination of techniques of the fuzzy system and artificial intelligence in the application area of non-linear noise and interference suppression. This structure used is called an Adaptive Neuro Fuzzy Inference System (ANFIS). This system finds practical use mainly in audio telephone (mobile) communication in a noisy environment (transport, production halls, sports matches, etc). Experimental methods based on the two-input adaptive noise cancellation concept was clearly outlined. Within the experiments carried out, the authors created, based on the ANFIS structure, a comprehensive system for adaptive suppression of unwanted background interference that occurs in audio communication and degrades the audio signal. The system designed has been tested on real voice signals. This article presents the investigation and comparison amongst three distinct approaches to noise cancellation in speech; they are LMS (least mean squares) and RLS (recursive least squares) adaptive filtering and ANFIS. A careful review of literatures indicated the importance of non-linear adaptive algorithms over linear ones in noise cancellation. It was concluded that the ANFIS approach had the overall best performance as it efficiently cancelled noise even in highly noise-degraded speech. Results were drawn from the successful experimentation, subjective-based tests were used to analyse their comparative performance while objective tests were used to validate them. Implementation of algorithms was experimentally carried out in Matlab to justify the claims and determine their relative performances.Web of Science66631030

A Novel Technique for Removal of High Density White Spot Noise from Digital Neutron Radiographic Images

This paper proposes a novel technique of adaptive switching alternative median (ASAM) filter for high-density white spot noise removal. The ASAM filter is composed of two blocks filtering, namely main and secondary block filtering, respectively. The proposed secondary block filtering is a new technique in high-density impulse noise removal and the main contribution of this research. The ASAM algorithm was tested on the standard 8-bit gray-scale, 512×512 pixel Lena image and a real neutron radiographic image. The results showed significant reduction of white spot noise in both types of images through visual inspection.    To measure the performance of noise removal in simulation test we measured the peak signal-to-noise ratio (PSNR), structural similarity (SSIM) index, and denoising time, and in real application tests we measured signal-to-noise ratio (SNR). From the experiments of simulation test, at the highest level noise of 95 % the obtained PSNR and SSIM are 23.584 dB and 0.696 respectively. These are higher than the results of other algorithms that are 16.697 dB and 0.475, respectively, for DBA, 16.696 dB and 0.408 for NAFSM, and 18.860 dB and 0.568 for NASNLM. The denoising times for DBA, NAFSM, NASNLM, and ASAM were obtained as 6.469 s, 5.186 s, 36.735 s, and 5.197 s respectively. From the experiments of real application test we obtained the SNR for DBA, NAFSM, NASNLM, and ASAM as 32.42 dB, 6.01 dB, 18.77 dB, and 32.96 dB, respectively. In general, these results show that ASAM filter is superior to the existing filtering methods. The ASAM filter improved the image restoration quality, especially in removing the high-density white spot noise, and was able to yield good filtering result which exhibits better PSNR, SSIM, denoising time, and qualitative visual inspection

Fuzzy averaging filter for impulse noise reduction in colour images with a correction step

[EN] In this paper we propose a fuzzy detection and reduction method for impulse noise in colour images. Detection is based on the fuzzyfication of a well-known statistic called ROD. The noise degrees obtained are used to reduce impulses by employing a fuzzy averaging between the input colour vector and a robust estimate of noise-free colour vector within the input neighbourhood. Fuzzy averaging has some advantages in terms of both noise reduction and detail preservation in front of detect and replace approaches because of threshold based decisions of the latter. However, robustness of the former is lower. We solve this problem by including a correction mechanism that checks the fuzzy noise degree of the output and replaces it with a robust colour vector either when noise has not been properly reduced or when a colour artefact has been introduced. We carry out a thorough study of the method parameter setting and give a convenient and robust setting. Experimental results show that our approach is very robust in front of four different types of impulse noise.The authors are very grateful to the reviewers for their valuable suggestions. Valentin Gregori and Samuel Morillas acknowledges the support of Ministry of Economy and Competitiveness of Spain under grant MTM 2015-64373-P (MINECO/FEDER, UE). Bernardino Roig and Almanzor Sapena acknowledges the support of Generalitat Valencians under grant AICO/2017/059.Gregori Gregori, V.; Morillas, S.; Roig, B.; Sapena Piera, A. (2018). Fuzzy averaging filter for impulse noise reduction in colour images with a correction step. Journal of Visual Communication and Image Representation. 55:518-528. https://doi.org/10.1016/j.jvcir.2018.06.025S5185285

Analysis of Atrial Electrograms

This work provides methods to measure and analyze features of atrial electrograms - especially complex fractionated atrial electrograms (CFAEs) - mathematically. Automated classification of CFAEs into clinical meaningful classes is applied and the newly gained electrogram information is visualized on patient specific 3D models of the atria. Clinical applications of the presented methods showed that quantitative measures of CFAEs reveal beneficial information about the underlying arrhythmia

Machine Learning And Image Processing For Noise Removal And Robust Edge Detection In The Presence Of Mixed Noise

The central goal of this dissertation is to design and model a smoothing filter based on the random single and mixed noise distribution that would attenuate the effect of noise while preserving edge details. Only then could robust, integrated and resilient edge detection methods be deployed to overcome the ubiquitous presence of random noise in images. Random noise effects are modeled as those that could emanate from impulse noise, Gaussian noise and speckle noise. In the first step, evaluation of methods is performed based on an exhaustive review on the different types of denoising methods which focus on impulse noise, Gaussian noise and their related denoising filters. These include spatial filters (linear, non-linear and a combination of them), transform domain filters, neural network-based filters, numerical-based filters, fuzzy based filters, morphological filters, statistical filters, and supervised learning-based filters. In the second step, switching adaptive median and fixed weighted mean filter (SAMFWMF) which is a combination of linear and non-linear filters, is introduced in order to detect and remove impulse noise. Then, a robust edge detection method is applied which relies on an integrated process including non-maximum suppression, maximum sequence, thresholding and morphological operations. The results are obtained on MRI and natural images. In the third step, a combination of transform domain-based filter which is a combination of dual tree – complex wavelet transform (DT-CWT) and total variation, is introduced in order to detect and remove Gaussian noise as well as mixed Gaussian and Speckle noise. Then, a robust edge detection is applied in order to track the true edges. The results are obtained on medical ultrasound and natural images. In the fourth step, a smoothing filter, which is a feed-forward convolutional network (CNN) is introduced to assume a deep architecture, and supported through a specific learning algorithm, l2 loss function minimization, a regularization method, and batch normalization all integrated in order to detect and remove impulse noise as well as mixed impulse and Gaussian noise. Then, a robust edge detection is applied in order to track the true edges. The results are obtained on natural images for both specific and non-specific noise-level