5,916 research outputs found
Millimeter wave experiment for ATS-F
A detailed description of spaceborne equipment is provided. The equipment consists of two transmitters radiating signals at 20 and 30 GHz from either U.S. coverage horn antennas or a narrow beam parabolic antenna. Three modes of operation are provided: a continuous wave mode, a multitone mode in which nine spectral lines having 180 MHz separation and spaced symmetrically about each carrier, and a communications mode in which communications signals from the main spacecraft transponder are modulated on the two carriers. Detailed performance attained in the flight/prototype model of the equipment is presented both under laboratory conditions and under environmental extremes. Provisions made for ensuring reliability in space operation are described. Also described the bench test equipment developed for use with the experiment, and a summary of the new technology is included
Microwave and RF Applications for Micro-resonator based Frequency Combs
Photonic integrated circuits that exploit nonlinear optics in order to
generate and process signals all-optically have achieved performance far
superior to that possible electronically - particularly with respect to speed.
We review the recent achievements based in new CMOS-compatible platforms that
are better suited than SOI for nonlinear optics, focusing on radio frequency
(RF) and microwave based applications that exploit micro-resonator based
frequency combs. We highlight their potential as well as the challenges to
achieving practical solutions for many key applications. These material systems
have opened up many new capabilities such as on-chip optical frequency comb
generation and ultrafast optical pulse generation and measurement. We review
recent work on a photonic RF Hilbert transformer for broadband microwave
in-phase and quadrature-phase generation based on an integrated frequency
optical comb. The comb is generated using a nonlinear microring resonator based
on a CMOS compatible, high-index contrast, doped-silica glass platform. The
high quality and large frequency spacing of the comb enables filters with up to
20 taps, allowing us to demonstrate a quadrature filter with more than a
5-octave (3 dB) bandwidth and an almost uniform phase response.Comment: 10 pages, 6 figures, 68 references. arXiv admin note: substantial
text overlap with arXiv:1512.0174
Recommended from our members
Design of a 3 GHz fine resolution LC DCO
In this thesis, the design of a fine resolution LC digitally controlled oscillator (DCO) is introduced. Two NMOS varactor banks are used to achieve 12 bits medium and fine frequency tuning. Both delta-sigma modulator and capacitive divider circuit are implemented to achieve a finer resolution and a larger dynamic range. The LC-oscillator has a coarse tuning range from 3.05 GHz to 3.85 GHz and a fine tuning range of 50MHz. It features a phase noise level of -115dBc/Hz at 1MHz frequency offset and consumes 5.4mW. Efficient simulation methodology is explored. Finally, this DCO is simulated in an All-Digital Phase Locked Loop (ADPLL) with other ideal behavior blocks implemented using Verilog-A, and the performance of the DCO is evaluated.Electrical and Computer Engineerin
Circuits and Systems for On-Chip RF Chemical Sensors and RF FDD Duplexers
Integrating RF bio-chemical sensors and RF duplexers helps to reduce cost and area in the current applications. Furthermore, new applications can exist based on the large scale integration of these crucial blocks. This dissertation addresses the integration of RF bio-chemical sensors and RF duplexers by proposing these initiatives.
A low power integrated LC-oscillator-based broadband dielectric spectroscopy (BDS) system is presented. The real relative permittivity Îľâr is measured as a shift in the oscillator frequency using an on-chip frequency-to-digital converter (FDC). The imaginary relative permittivity Îľâr increases the losses of the oscillator tank which mandates a higher dc biasing current to preserve the same oscillation amplitude. An amplitude-locked loop (ALL) is used to fix the amplitude and linearize the relation between the oscillator bias current and Îľâr. The proposed BDS system employs a sensing oscillator and a reference oscillator where correlated double sampling (CDS) is used to mitigate the impact of flicker noise, temperature variations and frequency drifts. A prototype is implemented in 0.18 Âľm CMOS process with total chip area of 6.24 mm^2 to operate in 1-6 GHz range using three dual bands LC oscillators. The achieved standard deviation in the air is 2.1 ppm for frequency reading and 110 ppm for current reading.
A tunable integrated electrical balanced duplexer (EBD) is presented as a compact alternative to multiple bulky SAW and BAW duplexers in 3G/4G cellular transceivers. A balancing network creates a replica of the transmitter signal for cancellation at the input of a single-ended low noise amplifier (LNA) to isolate the receive path from the transmitter. The proposed passive EBD is based on a cross-connected transformer topology without the need of any extra balun at the antenna side. The duplexer achieves around 50 dB TX-RX isolation within 1.6-2.2 GHz range up to 22 dBm. The cascaded noise figure of the duplexer and LNA is 6.5 dB, and TX insertion loss (TXIL) of the duplexer is about 3.2 dB. The duplexer and LNA are implemented in 0.18 Âľm CMOS process and occupy an active area of 0.35 mm^2
Synchronization of Coupled Boolean Phase Oscillators
We design, characterize, and couple Boolean phase oscillators that include
state-dependent feedback delay. The state-dependent delay allows us to realize
an adjustable coupling strength, even though only Boolean signals are
exchanged. Specifically, increasing the coupling strength via the range of
state-dependent delay leads to larger locking ranges in uni- and bi-directional
coupling of oscillators in both experiment and numerical simulation with a
piecewise switching model. In the unidirectional coupling scheme, we unveil
asymmetric triangular-shaped locking regions (Arnold tongues) that appear at
multiples of the natural frequency of the oscillators. This extends
observations of a single locking region reported in previous studies. In the
bidirectional coupling scheme, we map out a symmetric locking region in the
parameter space of frequency detuning and coupling strength. Because of large
scalability of our setup, our observations constitute a first step towards
realizing large-scale networks of coupled oscillators to address fundamental
questions on the dynamical properties of networks in a new experimental
setting.Comment: 8 pages, 8 figure
Systems control theory applied to natural and synthetic musical sounds
Systems control theory is a far developped field which helps to study stability, estimation and control of dynamical systems. The physical behaviour of musical instruments, once described by dynamical systems, can then be controlled and numerically simulated for many purposes.
The aim of this paper is twofold: first, to provide the theoretical background on linear system theory, both in continuous and discrete time, mainly in the case of a finite number of degrees of freedom ; second, to give illustrative examples on wind instruments, such as the vocal tract represented as a waveguide, and a sliding flute
Fronthaul evolution: From CPRI to Ethernet
It is proposed that using Ethernet in the fronthaul, between base station baseband unit (BBU) pools and remote radio heads (RRHs), can bring a number of advantages, from use of lower-cost equipment, shared use of infrastructure with fixed access networks, to obtaining statistical multiplexing and optimised performance through probe-based monitoring and software-defined networking. However, a number of challenges exist: ultra-high-bit-rate requirements from the transport of increased bandwidth radio streams for multiple antennas in future mobile networks, and low latency and jitter to meet delay requirements and the demands of joint processing. A new fronthaul functional division is proposed which can alleviate the most demanding bit-rate requirements by transport of baseband signals instead of sampled radio waveforms, and enable statistical multiplexing gains. Delay and synchronisation issues remain to be solved
- âŚ