DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

New Design Techniques for Dynamic Reconfigurable Architectures

L'abstract è presente nell'allegato / the abstract is in the attachmen

A survey of emerging architectural techniques for improving cache energy consumption

The search goes on for another ground breaking phenomenon to reduce the ever-increasing disparity between the CPU performance and storage. There are encouraging breakthroughs in enhancing CPU performance through fabrication technologies and changes in chip designs but not as much luck has been struck with regards to the computer storage resulting in material negative system performance. A lot of research effort has been put on finding techniques that can improve the energy efficiency of cache architectures. This work is a survey of energy saving techniques which are grouped on whether they save the dynamic energy, leakage energy or both. Needless to mention, the aim of this work is to compile a quick reference guide of energy saving techniques from 2013 to 2016 for engineers, researchers and students

A Methodology for Modelling and Simulation of Dynamic and Partially Reconfigurable Systems

Non

Dynamic Processor Reconfiguration for Power, Performance and Reliability Management

Technology advancements allowed more transistors to be packed in a smaller area, while the improved performance helped in achieving higher clock frequencies. This, unfortunately led to a power density problem, forcing processor industry to lower the clock frequency and integrate multiple cores on the same die. Depending on core characteristics, the multiple cores in the die could be symmetric or asymmetric. Asymmetric multi-core processors (AMPs) have been proposed as an alternative to symmetric multi-cores to improve power efficiency. AMPs comprise of cores that implement the same ISA, but differ in performance and power characteristics due to varying sizes of micro-architectural resources. As the computational bottleneck of a workload shifts from one resource to another during its course of execution, reassigning it to another core (where it runs more efficiently), can improve the overall power efficiency. Thus achieving high power efficiency in AMPs requires (i) a diverse set of cores that are optimized for various program phases, (ii) runtime analysis to determine the best core to run on, and (iii) low overhead of re-assigning a thread to a different core type. Decisions to swap threads between AMPs are made at coarse grain granularity of millions of instructions, to mitigate the impact of thread migration overhead. But the computational needs of the program rapidly change during the course of its execution. The best core configuration for an application such that, both power consumption and performance are optimized, changes over time rapidly at fine granularity of thousands of instructions. This dissertation explores ways to design core micro-architecture such that high power efficiency could be achieved, if switching overhead could be lowered, enabling fine grain switching. To take advantage of power saving opportunities at fine grain granularity, this thesis explores reconfigurable/morphable architectures where core resources are reconfigured on demand to suit the needs of the executing application. At first, we explore reconfigurable architectures consisting of two kinds of cores: out-of-order (OOO) big cores and in-order (InO) small cores. The big cores provide higher performance while the small cores are more power efficient. In this proposed architecture, OOO core reconfigures into InO core at run time. Our proposed online management scheme decides to switch between these core types such that we obtain significant power benefits without impacting performance. We also observe that, resource requirements of applications can be quite diverse and consequently, resource bottlenecks or excesses can vary considerably. Thus, reconfiguration between just two core modes may not fully exploit power and performance improvement opportunities. We therefore, explore reconfigurable architectures consisting of diverse core types that not limited to big and little cores. A single core can reconfigure into multiple core modes where each mode has unique power and performance characteristics. Workload performance on a particular core mode depends on a large set of processor resources. Some workloads are highly memory intensive, some exhibit large instruction dependency, some experience high rates of branch mis-prediction, while other workloads exhibit large exploitable instruction level parallelism. A diverse set of core modes is needed, that could address shifting resource needs during various program phases of an application. Different trade-offs in power and performance could be achieved by reducing or expanding the size of various resource. Trade-offs for each core mode are also affected by operating voltage and frequency. We therefore, propose joint core resource resizing with dynamic voltage and frequency scaling (DVFS), which is important for applications whose performance is sensitive to changes in frequency. Thus, at fine granularity, the core should adapt to varying instruction window sizes, execution bandwidth and frequency to meet the demands of the workload at run-time to improve power efficiency. Many current processors employ DVFS aggressively to improve power efficiency and maximize performance. This dissertation studies the tradeoff in power efficiency in using fine grain DVFS and reconfigurable architectures mentioned above.We also explore another important problem due to continued scaling of devices which results in higher vulnerability to soft-errors. We consider dynamic core reconfiguration from the perspectives of both power efficiency and vulnerability to soft-errors. An online management scheme is proposed such that core reconfiguration upon a thread switch not only improves power efficiency but also does not increase the vulnerability to soft errors. In summary, we propose in this thesis several solutions for improving power efficiency by integrating heterogeneity within the core. We also address how popular power reduction techniques like DVFS are comparable to our approach. Finally, we address reliability challenges along with improving power efficiency

Adaptivity and Reconfigurability in Wireless Communications

A key issue of future wireless communication systems is that they have to be adaptive. In the Adaptive Wireless Networking (AWGN) project we aim at the implementation of adaptive wireless communication systems in a heterogeneous reconfigurable System-on-a-Chip (HRSoC). We introduce our methodologies for analyzing and mapping DSP functionality in dynamically reconfigurable heterogeneous hardware. A possible implementation of a multi-mode communication system in the MONTIUM architecture is discussed. Suggestions for future activities in the Adaptive Wireless Networking project are also given

Towards Power- and Energy-Efficient Datacenters

As the Internet evolves, cloud computing is now a dominant form of computation in modern lives. Warehouse-scale computers (WSCs), or datacenters, comprising the foundation of this cloud-centric web have been able to deliver satisfactory performance to both the Internet companies and the customers. With the increased focus and popularity of the cloud, however, datacenter loads rise and grow rapidly, and Internet companies are in need of boosted computing capacity to serve such demand. Unfortunately, power and energy are often the major limiting factors prohibiting datacenter growth: it is often the case that no more servers can be added to datacenters without surpassing the capacity of the existing power infrastructure. This dissertation aims to investigate the issues of power and energy usage in a modern datacenter environment. We identify the source of power and energy inefficiency at three levels in a modern datacenter environment and provides insights and solutions to address each of these problems, aiming to prepare datacenters for critical future growth. We start at the datacenter-level and find that the peak provisioning and improper service placement in multi-level power delivery infrastructures fragment the power budget inside production datacenters, degrading the compute capacity the existing infrastructure can support. We find that the heterogeneity among datacenter workloads is key to address this issue and design systematic methods to reduce the fragmentation and improve the utilization of the power budget. This dissertation then narrow the focus to examine the energy usage of individual servers running cloud workloads. Especially, we examine the power management mechanisms employed in these servers and find that the coarse time granularity of these mechanisms is one critical factor that leads to excessive energy consumption. We propose an intelligent and low overhead solution on top of the emerging finer granularity voltage/frequency boosting circuit to effectively pinpoints and boosts queries that are likely to increase the tail distribution and can reap more benefit from the voltage/frequency boost, improving energy efficiency without sacrificing the quality of services. The final focus of this dissertation takes a further step to investigate how using a fundamentally more efficient computing substrate, field programmable gate arrays (FPGAs), benefit datacenter power and energy efficiency. Different from other types of hardware accelerations, FPGAs can be reconfigured on-the-fly to provide fine-grain control over hardware resource allocation and presents a unique set of challenges for optimal workload scheduling and resource allocation. We aim to design a set coordinated algorithms to manage these two key factors simultaneously and fully explore the benefit of deploying FPGAs in the highly varying cloud environment.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/144043/1/hsuch_1.pd