A wideband linear tunable CDTA and its application in field programmable analogue array

This document is the Accepted Manuscript version of the following article: Hu, Z., Wang, C., Sun, J. et al. ‘A wideband linear tunable CDTA and its application in field programmable analogue array’, Analog Integrated Circuits and Signal Processing, Vol. 88 (3): 465-483, September 2016. Under embargo. Embargo end date: 6 June 2017. The final publication is available at Springer via https://link.springer.com/article/10.1007%2Fs10470-016-0772-7 © Springer Science+Business Media New York 2016In this paper, a NMOS-based wideband low power and linear tunable transconductance current differencing transconductance amplifier (CDTA) is presented. Based on the NMOS CDTA, a novel simple and easily reconfigurable configurable analogue block (CAB) is designed. Moreover, using the novel CAB, a simple and versatile butterfly-shaped FPAA structure is introduced. The FPAA consists of six identical CABs, and it could realize six order current-mode low pass filter, second order current-mode universal filter, current-mode quadrature oscillator, current-mode multi-phase oscillator and current-mode multiplier for analog signal processing. The Cadence IC Design Tools 5.1.41 post-layout simulation and measurement results are included to confirm the theory.Peer reviewedFinal Accepted Versio

Low-Power and Programmable Analog Circuitry for Wireless Sensors

Embedding networks of secure, wirelessly-connected sensors and actuators will help us to conscientiously manage our local and extended environments. One major challenge for this vision is to create networks of wireless sensor devices that provide maximal knowledge of their environment while using only the energy that is available within that environment. In this work, it is argued that the energy constraints in wireless sensor design are best addressed by incorporating analog signal processors. The low power-consumption of an analog signal processor allows persistent monitoring of multiple sensors while the device\u27s analog-to-digital converter, microcontroller, and transceiver are all in sleep mode. This dissertation describes the development of analog signal processing integrated circuits for wireless sensor networks. Specific technology problems that are addressed include reconfigurable processing architectures for low-power sensing applications, as well as the development of reprogrammable biasing for analog circuits

Low-Power and Programmable Analog Circuitry for Wireless Sensors

Embedding networks of secure, wirelessly-connected sensors and actuators will help us to conscientiously manage our local and extended environments. One major challenge for this vision is to create networks of wireless sensor devices that provide maximal knowledge of their environment while using only the energy that is available within that environment. In this work, it is argued that the energy constraints in wireless sensor design are best addressed by incorporating analog signal processors. The low power-consumption of an analog signal processor allows persistent monitoring of multiple sensors while the device\u27s analog-to-digital converter, microcontroller, and transceiver are all in sleep mode. This dissertation describes the development of analog signal processing integrated circuits for wireless sensor networks. Specific technology problems that are addressed include reconfigurable processing architectures for low-power sensing applications, as well as the development of reprogrammable biasing for analog circuits

Mixed Signal Integrated Circuit Design for Custom Sensor Interfacing

Low-power analog integrated circuits (ICs) can be utilized at the interface between an analog sensor and a digital system\u27s input to decrease power consumption, increase system accuracy, perform signal processing, and make the necessary adjustments for compatibility between the two devices. This interfacing has typically been done with custom integrated solutions, but advancements in floating-gate technologies have made reconfigurable analog ICs a competitive option. Whether the solution is a custom design or built from a reconfigurable system, digital peripheral circuits are needed to configure their operation for these analog circuits to work with the best accuracy.;Using an analog IC as a front end signal processor between an analog sensor and wireless sensor mote can greatly decrease battery consumption. Processing in the digital domain requires more power than when done on an analog system. An Analog Signal Processor (ASP) can allow the digital wireless mote to remain in sleep mode while the ASP is always listening for an important event. Once this event occurs, the ASP will wake the wireless mote, allowing it to record the event and send radio transmissions if necessary. As most wireless sensor networks employ the use of batteries as a power source, an energy harvesting system in addition to an ASP can be used to further supplement this battery consumption.;This thesis documents the development of mixed-signal integrated circuits for use as interfaces between analog sensors and digital Wireless Sensor Networks (WSNs). The following work outlines, as well as shows the results, of development for sensor interfacing utilizing both custom mixed signal integrated circuits as well as a Field Programmable Analog Array (FPAA) for post fabrication customization. An Analog Signal Processor (ASP) has been used in an Acoustic Vehicle Classification system. To keep these interfacing methods low power, a prototype energy harvesting system using commercial-off-the-shelf (COTS) devices is detailed which has led to the design of a fully integrated solution

Programming of Floating-Gate Transistors for Nonvolatile Analog Memory Array

Since they were introduced, floating-gate (FG) transistors have been used as non-volatile digital memory. Recent research has shown that floating-gate transistors can be successfully used as analog memory, specifically as programmable voltage and current sources. However, their proliferation has been limited due to the complex programming procedure and the complex testing equipment. Analog applications such as field-programmable analog arrays (FPAAs) require hundreds to thousands of floating-gate transistors on a single chip which makes the programming process even more complicated and very challenging. Therefore, a simplified, compact, and low-power scheme to program FGs are necessary. This work presents an improved version of the typical methodology for FG programming. Additionally, a novel programming methodology that utilizes negative voltages is presented here. This method simplifies the programming process by eliminating the use of supplementary and complicated infrastructure circuits, which makes the FG transistor a good candidate for low-power wireless sensor nodes and portable systems

Speech Processing Front-end in Low-power Hardware

The objective of this work is to develop analog integrated circuits to serve as low-power auditory front-ends in signal processing systems. An analog front-end can be used for feature-extraction to reduce the requirements of the digital back-end, or to detect and call attention to compelling characteristics of a signal while the back-end is in sleep mode. Such a front-end should be advantageous for speech recognition, noise suppression, auditory scene analysis, hearing prostheses, biological modeling, or hardware-based event detection.;This work presents a spectral decomposition system, which consists of a bandpass filter bank with sub-band magnitude detection. The bandpass filter is low-power and each channel can be individually programmed for different quality factors and passband gains. The novel magnitude detector has a 68 decibel dynamic range, excellent tracking capability, and consumes less than a microwatt of power. The system, which was fabricated in a 0.18 micron process, consists of a 16-channel filter bank and a variety of sub-band computational elements

Analog Reconfigurable Circuits

The aim of this paper is to present an overview of a new branch of analog electronics represented by analog reconfigurable circuits. The reconfiguration of analog circuits has been known and used since the beginnings of electronics, but the universal reconfigurable circuits called Field Programmable Analog Arrays (FPAA) have been developed over the last two decades. This paper presents the classification of analog circuit reconfiguration, examples of FPAA solutions obtained as academic projects and commercially available ones, as well as some application examples of the dynamic reconfiguration of FPAA.