BINARY TO RNS ENCODER FOR THE MODULI SET {2n−1,2n ,2n+1} WITH EMBEDDED DIMINISHED-1 CHANNEL FOR DSP APPLICATION

Architecture of binary to residue number system encoder based onthe moduli set {2n − 1,2n,2n + 1} with embedded modulo 2n + 1 channel in the diminished-1 representation, which can be used instead of the standard modulo 2n+1 channel, is presented. We consider the binary numbers with dynamic range of proposed moduli set which is 23n−2n. Within this dynamic range, 3n-bit binary number is partitioned into three n-bit parts and converted to residue numbers. The proposed architecture based on moduli set {2n−1,2n ,2n+1} with embedded diminished-1 encoded channel have been mapped on Xilinx FPGA chip. The proposed architecture can be utilized in conjunction with any fast binary adder without requiring any extra hardware

Overflow Detection in Residue Number System, Moduli Set {2n-1,2n,2n+1}

Residue Number System (RNS) is a non-weighted number system for integer number arithmetic, which is based on the residues of a number to a certain set of numbers called module set. The main characteristics and advantage of residue number system is reducing carry propagation in calculations. The elimination of carry propagation leads to the possibility of maximizing parallel processing and reducing the delay. Residue number system is mostly fitted for calculations involving addition and multiplication. But some calculations and operations such as division, comparison between numbers, sign determination and overflow detection is complicated. In this paper a method for overflow detection is proposed for the special moduli set {2n-1,2n,2n+1} . This moduli set is favorable because of the ease of calculations in forward and reverse conversions. The proposed method is based on grouping the dynamic range into groups by using the New Chinese Theorem and exploiting the properties of residue differences. Each operand of addition is mapped into a group, then the sum of these groups is compared with the indicator and the overflow is detected. The proposed method can detect overflow with less delay comparing to previous methods

Sign Detection and Signed Integer Comparison for the 3-Moduli Set {2^n±1,2^(n+k)}

Comparison, division and sign detection are considered complicated operations in residue number system (RNS). A straightforward solution is to convert RNS numbers into binary formats and then perform complicated operations using conventional binary operators. If efficient circuits are provided for comparison, division and sign detection, the application of RNS can be extended to the cases including these operations.For RNS comparison in the 3-moduli set , we have only found one hardware realization. In this paper, an efficient RNS comparator is proposed for the moduli set  which employs sign detection method and operates more efficient than its counterparts. The proposed sign detector and comparator utilize dynamic range partitioning (DRP), which has been recently presented for unsigned RNS comparison. Delay and cost of the proposed comparator are lower than the previous works and makes it appropriate for RNS applications with limited delay and cost

Parallel-prefix structures for binary and modulo {2n - 1, 2n, 2n + 1} adders

Adders are the among the most essential arithmetic units within digital systems. Parallel-prefix structures are efficient for adders because of their regular topology and logarithmic delay. However, building parallel-prefix adders are barely discussed in literature. This work puts emphasis on how to build prefix trees and simple algorithms for building these architectures. One particular modification of adders is for use with modulo arithmetic. The most common type of modulo adders are modulo 2n -1 and modulo 2n + 1 adders because they have a common base that is a power of 2. In order to improve their speed, parallel-prefix structures can also be employed for modulo 2n +- 1 adders. This dissertation presents the formation of several binary and modulo prefix architectures and their modifications using Ling's algorithm. For all binary and modulo adders, both algorithmic and quantitative analysis are provided to compare the performance of different architectures. Furthermore, to see how process impact the design, three technologies, from deep submicron to nanometer range, are utilized to collect the quantitative data

Residue Number System Based Building Blocks for Applications in Digital Signal Processing

Předkládaná disertační práce se zabývá návrhem základních bloků v systému zbytkových tříd pro zvýšení výkonu aplikací určených pro digitální zpracování signálů (DSP). Systém zbytkových tříd (RNS) je neváhová číselná soustava, jež umožňuje provádět paralelizovatelné, vysokorychlostní, bezpečné a proti chybám odolné aritmetické operace, které jsou zpracovávány bez přenosu mezi řády. Tyto vlastnosti jej činí značně perspektivním pro použití v DSP aplikacích náročných na výpočetní výkon a odolných proti chybám. Typický RNS systém se skládá ze tří hlavních částí: převodníku z binárního kódu do RNS, který počítá ekvivalent vstupních binárních hodnot v systému zbytkových tříd, dále jsou to paralelně řazené RNS aritmetické jednotky, které provádějí aritmetické operace s operandy již převedenými do RNS. Poslední část pak tvoří převodník z RNS do binárního kódu, který převádí výsledek zpět do výchozího binárního kódu. Hlavním cílem této disertační práce bylo navrhnout nové struktury základních bloků výše zmiňovaného systému zbytkových tříd, které mohou být využity v aplikacích DSP. Tato disertační práce předkládá zlepšení a návrhy nových struktur komponent RNS, simulaci a také ověření jejich funkčnosti prostřednictvím implementace v obvodech FPGA. Kromě návrhů nové struktury základních komponentů RNS je prezentován také podrobný výzkum různých sad modulů, který je srovnává a determinuje nejefektivnější sadu pro různé dynamické rozsahy. Dalším z klíčových přínosů disertační práce je objevení a ověření podmínky určující výběr optimální sady modulů, která umožňuje zvýšit výkonnost aplikací DSP. Dále byla navržena aplikace pro zpracování obrazu využívající RNS, která má vůči klasické binární implementanci nižší spotřebu a vyšší maximální pracovní frekvenci. V závěru práce byla vyhodnocena hlavní kritéria při rozhodování, zda je vhodnější pro danou aplikaci využít binární číselnou soustavu nebo RNS.This doctoral thesis deals with designing residue number system based building blocks to enhance the performance of digital signal processing applications. The residue number system (RNS) is a non-weighted number system that provides carry-free, parallel, high speed, secure and fault tolerant arithmetic operations. These features make it very attractive to be used in high-performance and fault tolerant digital signal processing (DSP) applications. A typical RNS system consists of three main components; the first one is the binary to residue converter that computes the RNS equivalent of the inputs represented in the binary number system. The second component in this system is parallel residue arithmetic units that perform arithmetic operations on the operands already represented in RNS. The last component is the residue to binary converter, which converts the outputs back into their binary representation. The main aim of this thesis was to propose novel structures of the basic components of this system in order to be later used as fundamental units in DSP applications. This thesis encloses improving and designing novel structures of these components, simulating and verifying their efficiency via FPGA implementation. In addition to suggesting novel structures of basic RNS components, a detailed study on different moduli sets that compares and determines the most efficient one for different dynamic range requirements is also presented. One of the main outcomes of this thesis is concluding and verifying the main condition that should be met when choosing a moduli set, in order to improve the timing performance of a DSP application. An RNS-based image processing application is also proposed. Its efficiency, in terms of timing performance and power consumption, is proved via comparing it with a binary-based one. Finally, the main considerations that should be taken into account when choosing to use the binary number system or RNS are also discussed in details.

Montgomery and RNS for RSA Hardware Implementation

There are many architectures for RSA hardware implementation which improve its performance. Two main methods for this purpose are Montgomery and RNS. These are fast methods to convert plaintext to ciphertext in RSA algorithm with hardware implementation. RNS is faster than Montgomery but it uses more area. The goal of this paper is to compare these two methods based on the speed and on the used area. For this purpose the architecture that has a better performance for each method is selected, and some modification is done to enhance their performance. This comparison can be used to select the proper method for hardware implementation in both FPGA and ASIC design

Fast Overflow Detection Scheme by Operands Examinations Method for Length Three Moduli Sets

In this paper, we present a fast overflow detection scheme by Operands Examination Method (OEM) for 3-Moduli Sets. The method examines the sum of the Mixed Radix Digits (MRDs) computed using the Mixed Radix Conversion (MRC) method to detect overflow for the sum of operands. It is observed that by reducing larger numbers into smaller numbers, the OEM approach makes computations easier and faster. The proposed scheme is further implemented on the Moduli Set for validation purposes. Theoretically, the scheme proves to be more efficient in detecting overflow as compared to current existing overflow detection schemes. Keywords: Residue Number System, Operands Examination Method, Overflow Detection, Mixed Radix Digits, Mixed Radix Conversion

Improving Modular Inversion in RNS using the Plus-Minus Method

The paper describes a new RNS modular inversion algorithm based on the extended Euclidean algorithm and the plus-minus trick. In our algorithm, comparisons over large RNS values are replaced by cheap computations modulo 4. Comparisons to an RNS version based on Fermat’s little theorem were carried out. The number of elementary modular operations is significantly reduced: a factor 12 to 26 for multiplications and 6 to 21 for additions. Virtex 5 FPGAs implementations show that for a similar area, our plus-minus RNS modular inversion is 6 to 10 times faster

Low-cost duplication for separable error detection in computer arithmetic

Low-cost arithmetic error detection will be necessary in the future to ensure correct and safe system operation. However, current error detection mechanisms for arithmetic either have high area and energy overheads or are complex and offer incomplete protection against errors. Full duplication is simple, strong, and separable, but often is prohibitively costly. Alternative techniques such as arithmetic error coding require lower hardware and energy overheads than full duplication, but they do so at the expense of high design effort and error coverage holes. The goal of this research is to mitigate the deficiencies of duplication and arithmetic error coding to form an error detection scheme that may be readily employed in future systems. The techniques described by this work use a general duplication technique that employs an alternate number system in the duplicate arithmetic unit. These novel dual modular redundancy organizations are referred to as low-cost duplication, and they provide compelling efficiency and coverage advantages over prior arithmetic error detection mechanisms.Electrical and Computer Engineerin