High Performance Network Worm Detection Engine Using Memory Efficient Circular Buffer.

This paper presents the implementation of a memory efficient circular buffer to ensure a high performance network worm detection engine. A worm detection engine's primary function is to detect the existence of worms in a particular network

Analysis of intrusion prevention methods

Thesis (Master)--Izmir Institute of Technology, Computer Engineering, Izmir, 2004Includes bibliographical references (leaves: 105-108)Text in English; Abstract: Turkish and Englishviii, 108 leavesToday, the pace of the technological development and improvements has compelled the development of new and more complex applications. The obligatory of application development in a short time to rapidly changing requirements causes skipping of some stages, mostly the testing stage, in the software development cycle thus, leads to the production of applications with defects. These defects are, later, discovered by intruders to be used to penetrate into computer systems. Current security technologies, such as firewalls, intrusion detection systems, honeypots, network-based antivirus systems, are insufficient to protect systems against those, continuously increasing and rapid-spreading attacks. Intrusion Prevention System (IPS) is a new technology developed to block today.s application-specific, data-driven attacks that spread in the speed of communication. IPS is the evolved and integrated state of the existing technologies; it is not a new approach to network security. In this thesis, IPS products of various computer security appliance developer companies have been analyzed in details. At the end of these analyses, the requirements of network-based IPSs have been identified and an architecture that fits those requirements has been proposed. Also, a sample network-based IPS has been developed by modifying the open source application Snort

A Parallel Computational Approach for String Matching- A Novel Structure with Omega Model

In r e cent day2019;s parallel string matching problem catch the attention of so many researchers because of the importance in different applications like IRS, Genome sequence, data cleaning etc.,. While it is very easily stated and many of the simple algorithms perform very well in practice, numerous works have been published on the subject and research is still very active. In this paper we propose a omega parallel computing model for parallel string matching. The algorithm is designed to work on omega model pa rallel architecture where text is divided for parallel processing and special searching at division point is required for consistent and complete searching. This algorithm reduces the number of comparisons and parallelization improves the time efficiency. Experimental results show that, on a multi - processor system, the omega model implementation of the proposed parallel string matching algorithm can reduce string matching time

Reconfigurable framework for high-bandwidth stream-oriented data processing

Designing a digital system that implements an assortment of specialized high performance algorithms can be costly. Considerable non-recurring engineering costs are required to develop an application specific integrated circuit (ASIC). Additionally, updating or adding features to a design requires the ASIC to be redesigned and refabricated. An alternative to using an ASIC is the field programmable gate array (FPGA). The modern FPGA\u27s ability to be partially reconfigured at runtime allows for the device to have the flexibility normally associated with a processor, while also being able to implement digital logic like in an ASIC. This capability allows for multiple digital functions to be loaded into the device at runtime only as needed. This thesis focuses on developing a reconfigurable framework that enables stream-oriented applications to make more effective use of FPGA resources and to manage partial reconfiguration operations across multiple tasks. This multichannel framework addresses several shortcomings of past research that evaluated various dynamic partial reconfiguration techniques using a color space conversion (CSC) engine. This framework allows for multiple different computations to be performed simultaneously, further improving throughput and flexibility of applications implemented within it. Performance of the system is evaluated by comparing its computational throughput to previous efforts using the CSC engine as well as the performance gained from the flexible scheduling that the framework allows. Implementations using the CSC engine show that performance can be improved up to 5 times faster than previous works, as a result of exploiting parallelism

System Design and Implementation for Hybrid Network Function Virtualization

With the application of virtualization technology in computer networks, many new research areas and techniques have been explored, such as network function virtualization (NFV). A significant benefit of virtualization is that it reduces the cost of a network system and increases its flexibility. Due to the increasing complexity of the network environment and constantly improving network scale and bandwidth, it is imperative to aim for higher performance, extensibility, and flexibility in the future network systems. In this dissertation, hybrid NFV platforms applying virtualization technology are proposed. We further explore the techniques used to improve the performance, scalability and resilience of these systems. In the first part of this dissertation, we describe a new heterogeneous hardware-software NFV platform that provides scalability and programmability while supporting significant hardware-level parallelism and reconfiguration. Our computing platform takes advantage of both field-programmable gate arrays (FPGAs) and microprocessors to implement numerous virtual network functions (VNFs) that can be dynamically customized to specific network flow needs. Traffic management and hardware reconfiguration functions are performed by a global coordinator which allows for the rapid sharing of network function states and continuous evaluation of network function needs. With the help of state sharing mechanism offered by the coordinator, customer-defined VNF instances can be easily migrated between heterogeneous middleboxes as the network environment changes. A resource allocation algorithm dynamically assesses resource deployments as network flows and conditions are updated. In the second part of this thesis document, we explore a new session-level approach for NFV that implements distributed agents in heterogeneous middleboxes to steer packets belonging to different sessions through session-specific service chains. Our session-level approach supports inter-domain service chaining with both FPGA- and processor-based middleboxes, dynamic reconfiguration of service chains for ongoing sessions, and the application of session-level approaches for UDP-based protocols. To demonstrate our approach, we establish inter-domain service chains for QUIC sessions, and reconfigure the service chains across a range of FPGA- and processor-based middleboxes. We show that our session-level approach can successfully reconfigure service chains for individual QUIC sessions. Compared with software implementations, the distributed agents implemented on FPGAs show better performance in various test scenarios

A Framework for the Design and Analysis of High-Performance Applications on FPGAs using Partial Reconfiguration

The field-programmable gate array (FPGA) is a dynamically reconfigurable digital logic chip used to implement custom hardware. The large densities of modern FPGAs and the capability of the on-thely reconfiguration has made the FPGA a viable alternative to fixed logic hardware chips such as the ASIC. In high-performance computing, FPGAs are used as co-processors to speed up computationally intensive processes or as autonomous systems that realize a complete hardware application. However, due to the limited capacity of FPGA logic resources, denser FPGAs must be purchased if more logic resources are required to realize all the functions of a complex application. Alternatively, partial reconfiguration (PR) can be used to swap, on demand, idle components of the application with active components. This research uses PR to swap components to improve the performance of the application given the limited logic resources available with smaller but economical FPGAs. The swap is called ”resource sharing PR”. In a pipelined design of multiple hardware modules (pipeline stages), resource sharing PR is a technique that uses PR to improve the performance of pipeline bottlenecks. This is done by reconfiguring other pipeline stages, typically those that are idle waiting for data from a bottleneck, into an additional parallel bottleneck module. The target pipeline of this research is a two-stage “slow-toast” pipeline where the flow of data traversing the pipeline transitions from a relatively slow, bottleneck stage to a fast stage. A two stage pipeline that combines FPGA-based hardware implementations of well-known Bioinformatics search algorithms, the X! Tandem algorithm and the Smith-Waterman algorithm, is implemented for this research; the implemented pipeline demonstrates that characteristics of these algorithm. The experimental results show that, in a database of unknown peptide spectra, when matching spectra with 388 peaks or greater, performing resource sharing PR to instantiate a parallel X! Tandem module is worth the cost for PR. In addition, from timings gathered during experiments, a general formula was derived for determining the value of performing PR upon a fast module

FPGA structures for high speed and low overhead dynamic circuit specialization

A Field Programmable Gate Array (FPGA) is a programmable digital electronic chip. The FPGA does not come with a predefined function from the manufacturer; instead, the developer has to define its function through implementing a digital circuit on the FPGA resources. The functionality of the FPGA can be reprogrammed as desired and hence the name “field programmable”. FPGAs are useful in small volume digital electronic products as the design of a digital custom chip is expensive. Changing the FPGA (also called configuring it) is done by changing the configuration data (in the form of bitstreams) that defines the FPGA functionality. These bitstreams are stored in a memory of the FPGA called configuration memory. The SRAM cells of LookUp Tables (LUTs), Block Random Access Memories (BRAMs) and DSP blocks together form the configuration memory of an FPGA. The configuration data can be modified according to the user’s needs to implement the user-defined hardware. The simplest way to program the configuration memory is to download the bitstreams using a JTAG interface. However, modern techniques such as Partial Reconfiguration (PR) enable us to configure a part in the configuration memory with partial bitstreams during run-time. The reconfiguration is achieved by swapping in partial bitstreams into the configuration memory via a configuration interface called Internal Configuration Access Port (ICAP). The ICAP is a hardware primitive (macro) present in the FPGA used to access the configuration memory internally by an embedded processor. The reconfiguration technique adds flexibility to use specialized ci rcuits that are more compact and more efficient t han t heir b ulky c ounterparts. An example of such an implementation is the use of specialized multipliers instead of big generic multipliers in an FIR implementation with constant coefficients. To specialize these circuits and reconfigure during the run-time, researchers at the HES group proposed the novel technique called parameterized reconfiguration that can be used to efficiently and automatically implement Dynamic Circuit Specialization (DCS) that is built on top of the Partial Reconfiguration method. It uses the run-time reconfiguration technique that is tailored to implement a parameterized design. An application is said to be parameterized if some of its input values change much less frequently than the rest. These inputs are called parameters. Instead of implementing these parameters as regular inputs, in DCS these inputs are implemented as constants, and the application is optimized for the constants. For every change in parameter values, the design is re-optimized (specialized) during run-time and implemented by reconfiguring the optimized design for a new set of parameters. In DCS, the bitstreams of the parameterized design are expressed as Boolean functions of the parameters. For every infrequent change in parameters, a specialized FPGA configuration is generated by evaluating the corresponding Boolean functions, and the FPGA is reconfigured with the specialized configuration. A detailed study of overheads of DCS and providing suitable solutions with appropriate custom FPGA structures is the primary goal of the dissertation. I also suggest different improvements to the FPGA configuration memory architecture. After offering the custom FPGA structures, I investigated the role of DCS on FPGA overlays and the use of custom FPGA structures that help to reduce the overheads of DCS on FPGA overlays. By doing so, I hope I can convince the developer to use DCS (which now comes with minimal costs) in real-world applications. I start the investigations of overheads of DCS by implementing an adaptive FIR filter (using the DCS technique) on three different Xilinx FPGA platforms: Virtex-II Pro, Virtex-5, and Zynq-SoC. The study of how DCS behaves and what is its overhead in the evolution of the three FPGA platforms is the non-trivial basis to discover the costs of DCS. After that, I propose custom FPGA structures (reconfiguration controllers and reconfiguration drivers) to reduce the main overhead (reconfiguration time) of DCS. These structures not only reduce the reconfiguration time but also help curbing the power hungry part of the DCS system. After these chapters, I study the role of DCS on FPGA overlays. I investigate the effect of the proposed FPGA structures on Virtual-Coarse-Grained Reconfigurable Arrays (VCGRAs). I classify the VCGRA implementations into three types: the conventional VCGRA, partially parameterized VCGRA and fully parameterized VCGRA depending upon the level of parameterization. I have designed two variants of VCGRA grids for HPC image processing applications, namely, the MAC grid and Pixie. Finally, I try to tackle the reconfiguration time overhead at the hardware level of the FPGA by customizing the FPGA configuration memory architecture. In this part of my research, I propose to use a parallel memory structure to improve the reconfiguration time of DCS drastically. However, this improvement comes with a significant overhead of hardware resources which will need to be solved in future research on commercial FPGA configuration memory architectures