Fast Iterative Semi-Blind Receiver for URLLC in Short-Frame Full-Duplex Systems with CFO

IEEE We propose an iterative semi-blind (ISB) receiver structure to enable ultra-reliable low-latency communications (URLLC) in short-frame full-duplex (FD) systems with carrier frequency offset (CFO). To the best of our knowledge, this is the first work to propose an integral solution to channel estimation and CFO estimation for short-frame FD systems by utilizing a single pilot. By deriving an equivalent system model with CFO included implicitly, a subspace based blind channel estimation is proposed for the initial stage, followed by CFO estimation and channel ambiguities elimination. Then refinement of channel and CFO estimates is conducted iteratively. The integer and fractional parts of CFO in the full range are estimated as a whole and in closed-form at each iteration. The proposed ISB receiver significantly outperforms the previous methods in terms of frame error rate (FER), mean square errors (MSEs) of channel estimation and CFO estimation and output signal-tointerference- and-noise ratio (SINR), while at a halved spectral overhead. Cramér-Rao lower bounds (CRLBs) are derived to verify the effectiveness of the proposed ISB receiver structure. It also demonstrates high computational efficiency as well as fast convergence speed

Channel estimation techniques for next generation mobile communication systems

Mención Internacional en el título de doctorWe are witnessing a revolution in wireless technology, where the society is demanding new services, such as smart cities, autonomous vehicles, augmented reality, etc. These challenging services not only are demanding an enormous increase of data rates in the range of 1000 times higher, but also they are real-time applications with an important delay constraint. Furthermore, an unprecedented number of different machine-type devices will be also connected to the network, known as Internet of Things (IoT), where they will be transmitting real-time measurements from different sensors. In this context, the Third Generation Partnership Project (3GPP) has already developed the new Fifth Generation (5G) of mobile communication systems, which should be capable of satisfying all the requirements. Hence, 5G will provide three key aspects, such as: enhanced mobile broad-band (eMBB) services, massive machine type communications (mMTC) and ultra reliable low latency communications (URLLC). In order to accomplish all the mentioned requirements, it is important to develop new key radio technologies capable of exploiting the wireless environment with a higher efficiency. Orthogonal frequency division multiplexing (OFDM) is the most widely used waveform by the industry, however, it also exhibits high side lobes reducing considerably the spectral efficiency. Therefore, filter-bank multi-carrier combined with offset quadrature amplitude modulation (FBMC-OQAM) is a waveform candidate to replace OFDM due to the fact that it provides extremely low out-ofband emissions (OBE). The traditional spectrum frequencies range is close to saturation, thus, there is a need to exploit higher bands, such as millimeter waves (mm-Wave), making possible the deployment of ultra broad-band services. However, the high path loss in these bands increases the blockage probability of the radio-link, forcing us to use massive multiple-input multiple-output (MIMO) systems in order to increase either the diversity or capacity of the overall link. All these emergent radio technologies can make 5G a reality. However, all their benefits can be only exploited under the knowledge and availability of the channel state information (CSI) in order to compensate the effects produced by the channel. The channel estimation process is a well known procedure in the area of signal processing for communications, where it is a challenging task due to the fact that we have to obtain a good estimator, maintaining at the same time the efficiency and reduced complexity of the system and obtaining the results as fast as possible. In FBMC-OQAM, there are several proposed channel estimation techniques, however, all of them required a high number of operations in order to deal with the self-interference produced by the prototype filter, hence, increasing the complexity. The existing channel estimation and equalization techniques for massive MIMO are in general too complex due to the large number of antennas, where we must estimate the channel response of each antenna of the array and perform some prohibitive matrix inversions to obtain the equalizers. Besides, for the particular case of mm-Wave, the existing techniques either do not adapt well to the dynamic ranges of signal-to-noise ratio (SNR) scenarios or they assume some approximations which reduce the quality of the estimator. In this thesis, we focus on the channel estimation for different emerging techniques that are capable of obtaining a better performance with a lower number of operations, suitable for low complexity devices and for URLLC. Firstly, we proposed new pilot sequences for FBMC-OQAM enabling the use of a simple averaging process in order to obtain the CSI. We show that our technique outperforms the existing ones in terms of complexity and performance. Secondly, we propose an alternative low-complexity way of computing the precoding/postcoding equalizer under the scenario of massive MIMO, keeping the quality of the estimator. Finally, we propose a new channel estimation technique for massive MIMO for mm-Wave, capable of adapting to very variable scenarios in terms of SNR and outperforming the existing techniques. We provide some analysis of the mean squared error (MSE) and complexity of each proposed technique. Furthermore, some numerical results are given in order to provide a better understanding of the problem and solutions.Programa de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidente: Antonia María Tulino.- Secretario: Máximo Morales Céspedes.- Vocal: Octavia A. Dobr

The Four-C Framework for High Capacity Ultra-Low Latency in 5G Networks: A Review

Network latency will be a critical performance metric for the Fifth Generation (5G) networks expected to be fully rolled out in 2020 through the IMT-2020 project. The multi-user multiple-input multiple-output (MU-MIMO) technology is a key enabler for the 5G massive connectivity criterion, especially from the massive densification perspective. Naturally, it appears that 5G MU-MIMO will face a daunting task to achieve an end-to-end 1 ms ultra-low latency budget if traditional network set-ups criteria are strictly adhered to. Moreover, 5G latency will have added dimensions of scalability and flexibility compared to prior existing deployed technologies. The scalability dimension caters for meeting rapid demand as new applications evolve. While flexibility complements the scalability dimension by investigating novel non-stacked protocol architecture. The goal of this review paper is to deploy ultra-low latency reduction framework for 5G communications considering flexibility and scalability. The Four (4) C framework consisting of cost, complexity, cross-layer and computing is hereby analyzed and discussed. The Four (4) C framework discusses several emerging new technologies of software defined network (SDN), network function virtualization (NFV) and fog networking. This review paper will contribute significantly towards the future implementation of flexible and high capacity ultra-low latency 5G communications

Tensor-based signal processing with applications to MIMO-ODFM systems and intelligent reflecting surfaces

Der Einsatz von Tensor-Algebra-Techniken in der Signalverarbeitung hat in den letzten zwei Jahrzehnten zugenommen. Anwendungen wie Bildverarbeitung, biomedizinische Signalverarbeitung, radar, maschinelles Lernen, deep Learning und Kommunikation im Allgemeinen verwenden weitgehend tensorbasierte Verarbeitungstechniken zur Wiederherstellung, Schätzung und Klassifizierung von Signalen. Einer der Hauptgründe für den Einsatz der Tensorsignalverarbeitung ist die Ausnutzung der mehrdimensionalen Struktur von Signalen, wobei die Einzigartigkeitseigenschaften der Tensor-Zerlegung profitieren. Bei der drahtlosen Kommunikation beispielsweise können die Signale mehrere "Dimensionen" haben, wie Raum, Zeit, Frequenz, Polarisation, usw. Diese Arbeit ist in zwei Teile gegliedert. Im ersten Teil betrachten wir die Anwendung von Tensor-basierten Algorithmen für multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) Systeme unter Berücksichtigung von Vorhandensein von Phasenrauschenstörungen. In diesem Teil schlagen wir einen zweistufigen tensorbasierten Empfänger für eine gemeinsame Kanal-, Phasenrausch- und Datenschätzung in MIMO-OFDM-Systemen vor. In der ersten Stufe zeigen wir, dass das empfangene Signal auf den Pilotunterträgern als PARAFAC-Tensor dritter Ordnung modelliert werden kann. Auf der Grundlage dieses Modells werden zwei Algorithmen für die Schätzung der Phasen- und Kanalrauschen in den Pilotton vorgeschlagen. In der zweiten Stufe werden die übertragenen Daten geschätzt. Zu diesem Zweck schlagen wir einen Zero Forcing (ZF)-Empfänger vor, der sich die Tensorstruktur des empfangenen Signals auf den Datenträgern zunutze macht, indem er den vorgeschlagenen selektiven Kronecker-Produkt-Operators (SKP) kapitalisiert. Die Simulationsergebnisse zeigen, dass der vorgeschlagene Empfänger sowohl bei der Symbolfehlerrate als auch beim normalisierten mittleren quadratischen Fehler des geschätzten Kanal- und Phasenrauschmatrizen eine bessere Leistung im Vergleich zum Stand der Technik erzielt. Der zweite Teil dieser Arbeit befasst sich mit der Anwendung der Tensormodellierung zur Reduzierung des Kontrollsignalisierungsoverhead in zukünftigen drahtlosen Systemen, die durch intelligent reconfigurable surfaces (IRSs) unterstützt werden. Zu diesem Zweck schlagen wir eine Annäherung an die nahezu optimalen IRS-Phasenverschiebungen vor, die sonst einen prohibitiv hohen Kommunikationsoverhead auf den BS-IRS-Kontrollverbindungen verursachen würde. Die Hauptidee besteht darin, den optimalen Phasenvektor des IRSs, der Hunderte oder Tausende von Elementen haben kann, durch ein Tensormodell mit niedrigem Rang darzustellen. Dies wird erreicht durch Faktorisierung einer tensorisierten Version des IRS-Phasenverschiebungsvektors, wobei jede Komponente als Kronecker-Produkt einer vordefinierten Anzahl von Faktoren mit kleinerer Größe modelliert wird, die durch Tensor Zerlegungsalgorithmen erhaltet werden können. Wir zeigen, dass die vorgeschlagenen Low-Rank-Modelle die Rückkopplungsanforderungen für die BS-IRS-Kontrollverbindungen drastisch reduzieren. Die Simulationsergebnisse zeigen, dass die vorgeschlagene Methode besonders in Szenarien mit einer starken Sichtverbindung attraktiv sind. In diesem Fall wird fast die gleiche spektrale Effizienz erreicht wie in den Fällen mit nahezu optimalen Phasenverschiebungen, jedoch mit einem drastisch reduzierten Kommunikations-Overhead.The use of tensor algebra techniques in signal processing has been growing over the last two decades. Applications like image processing, biomedical signal processing, radar, machine/deep learning, and communications in general, largely employ tensor-based techniques for recovery, estimating, and classifying signals. One of the main reasons for using tensor signal processing is the exploitation of the multidimensional structure of signals, while benefiting from the uniqueness properties of tensor decomposition. For example, in wireless communications, the signals can have several “dimensions", e.g., space, time, frequency, polarization, beamspace, etc. This thesis is divided into two parts, first, in the application of a tensor-based algorithm in multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM) systems with the presence of phase-noise impairments. In this first part, we propose a two-stage tensor-based receiver for a joint channel, phase-noise, and data estimation in MIMO-OFDM systems. In the first stage, we show that the received signal at the pilot subcarriers can be modeled as a third-order PARAFAC tensor. Based on this model, we propose two algorithms for channel and phase-noise estimation at the pilot subcarriers. The second stage consists of data estimation, for which we propose a ZF receiver that capitalizes on the tensor structure of the received signal at the data subcarriers using the proposed SKP operator. Numerical simulations show that the proposed receivers achieves an improved performance compared to the state-of-art receivers in terms of symbol error rate (SER) and normalized mean square error (NMSE) of the estimated channel and phase-noise matrices. The second part of this thesis focuses on the application of tensor modeling to reduce the control signaling overhead in future wireless systems aided by intelligent reconfigurable surfaces (IRS). To this end, we propose a low-rank approximation of the near-optimal IRS phase-shifts, which would incur prohibitively high communication overhead on the BS-IRS controller links. The key idea is to represent the potentially large IRS phase-shift vector using a low-rank tensor model. This is achieved by factorizing a tensorized version of the IRS phase-shift vector, where each component is modeled as the Kronecker product of a predefined number of factors of smaller sizes, which can be obtained via tensor decomposition algorithms. We show that the proposed low-rank models drastically reduce the required feedback requirements associated with the BS-IRS control links. Simulation results indicate that the proposed method is especially attractive in scenarios with a strong line of sight component, in which case nearly the same spectral efficiency is reached as in the cases with near-optimal phase-shifts, but with a drastically reduced communication overhead

Modelling, Dimensioning and Optimization of 5G Communication Networks, Resources and Services

This reprint aims to collect state-of-the-art research contributions that address challenges in the emerging 5G networks design, dimensioning and optimization. Designing, dimensioning and optimization of communication networks resources and services have been an inseparable part of telecom network development. The latter must convey a large volume of traffic, providing service to traffic streams with highly differentiated requirements in terms of bit-rate and service time, required quality of service and quality of experience parameters. Such a communication infrastructure presents many important challenges, such as the study of necessary multi-layer cooperation, new protocols, performance evaluation of different network parts, low layer network design, network management and security issues, and new technologies in general, which will be discussed in this book

Single-Frequency Network Terrestrial Broadcasting with 5GNR Numerology

L'abstract è presente nell'allegato / the abstract is in the attachmen

Filter bank multicarrier waveforms for future wireless networks: interference analysis and cancellation

Billions of devices are expected to connect to future wireless networks. Although conventional orthogonal division multiplexing (OFDM) has proven to be an effective physical layer waveform for enhanced mobile broadband (eMBB), it experiences various challenges. For example, OFDM experiences high out-of-band (OOB) emission caused by the use of rectangular filters. This causes interference to adjacent frequency bands and make OFDM highly sensitive to asynchronous transmissions. Filter bank multicarrier (FBMC) systems have emerged as a promising waveform candidate to satisfy the requirements of future wireless networks. They employ prototype filters with faster spectral decay, which results in better OOB emission and spectral efficiency compared to OFDM. Also, FBMC systems support asynchronous transmissions, which can reduce the signaling overhead in future applications. However, in FBMC systems there is no subcarriers orthogonality, resulting in intrinsic interference. The purpose of this thesis is to address the intrinsic interference problem to make FBMC a viable option for practical application in future wireless networks. In this thesis, iterative interference cancellation (IIC) receivers are developed for FBMC systems to improve their performance and applicability in future applications. First, an IIC receiver is studied for uncoded FBMC with quadrature amplitude modulation (FBMC-QAM) systems. To improve the decoding performance, bit-interleaved coded modulation with iterative decoding (BICM-ID) is incorporated into the IIC receiver design and the technique of extrinsic information transfer (EXIT) chart analysis is used to track the convergence of the IIC-based BICM-ID receiver. Furthermore, the energy harvesting capabilities of FBMC is considered. Particularly, FBMC is integrated with a simultaneous wireless information and power transfer (SWIPT) technique. Finally, an interference cancellation receiver is investigated for asynchronous FBMC systems in both single and mixed numerology systems. Analytical expressions are derived for the various schemes and simulations results are shown to verify the performance of the different FBMC systems