Real-Time Vision System for License Plate Detection and Recognition on FPGA

Rapid development of the Field Programmable Gate Array (FPGA) offers an alternative way to provide acceleration for computationally intensive tasks such as digital signal and image processing. Its ability to perform parallel processing shows the potential in implementing a high speed vision system. Out of numerous applications of computer vision, this paper focuses on the hardware implementation of one that is commercially known as Automatic Number Plate Recognition (ANPR).Morphological operations and Optical Character Recognition (OCR) algorithms have been implemented on a Xilinx Zynq-7000 All-Programmable SoC to realize the functions of an ANPR system. Test results have shown that the designed and implemented processing pipeline that consumed 63 % of the logic resources is capable of delivering the results with relatively low error rate. Most importantly, the computation time satisfies the real-time requirement for many ANPR applications

Digital filter implementation over FPGA platform with LINUX OS

The embedded processors on FPGA's are a good tool to specific propose works. In this work we present how the FPGA is used to apply a Sobel filter to a set of images, also the step needed to set-up the entire system is described. An embedded processor, with a Linux distribution implemented is used to run a special compilation of C filter program, the filter is compared with the results obtained with a PC running the same filter, in the embedded system all the process runs in the FPGA and the exit file can be accessed by ftp or http server embedded into the Linux system

Digital filter implementation over FPGA platform with LINUX OS

The embedded processors on FPGA's are a good tool to specific propose works. In this work we present how the FPGA is used to apply a Sobel filter to a set of images, also the step needed to set-up the entire system is described. An embedded processor, with a Linux distribution implemented is used to run a special compilation of C filter program, the filter is compared with the results obtained with a PC running the same filter, in the embedded system all the process runs in the FPGA and the exit file can be accessed by ftp or http server embedded into the Linux system

Field programmable gate array based reconfigurable scanning probe/optical microscope

The increasing popularity of nanometrology and nanospectroscopy has pushed researchers to develop complex new analytical systems. This paper describes the development of a platform on which to build a microscopy tool that will allow for flexibility of customization to suit research needs. The novelty of the described system lies in its versatility of capabilities. So far, one version of this microscope has allowed for successful near-field and far-field fluorescence imaging with single molecule detection sensitivity. This system is easily adapted for reflection, polarization (Kerr magneto-optical (MO)), Raman, super-resolution techniques, and other novel scanning probe imaging and spectroscopic designs. While collecting a variety of forms of optical images, the system can simultaneously monitor topographic information of a sample with an integrated tuning fork based shear force system. The instrument has the ability to image at room temperature and atmospheric pressure or under liquid. The core of the design is a field programmable gate array (FPGA) data acquisition card and a single, low cost computer to control the microscope with analog control circuitry using off-the-shelf available components. A detailed description of electronics, mechanical requirements, and software algorithms as well as examples of some different forms of the microscope developed so far are discussed

Design and management of image processing pipelines within CPS: Acquired experience towards the end of the FitOptiVis ECSEL Project

Cyber-Physical Systems (CPSs) are dynamic and reactive systems interacting with processes, environment and, sometimes, humans. They are often distributed with sensors and actuators, characterized for being smart, adaptive, predictive and react in real-time. Indeed, image- and video-processing pipelines are a prime source for environmental information for systems allowing them to take better decisions according to what they see. Therefore, in FitOptiVis, we are developing novel methods and tools to integrate complex image- and video-processing pipelines. FitOptiVis aims to deliver a reference architecture for describing and optimizing quality and resource management for imaging and video pipelines in CPSs both at design- and run-time. The architecture is concretized in low-power, high-performance, smart components, and in methods and tools for combined design-time and run-time multi-objective optimization and adaptation within system and environment constraints

Performance and energy-efficient implementation of a smart city application on FPGAs

The continuous growth of modern cities and the request for better quality of life, coupled with the increased availability of computing resources, lead to an increased attention to smart city services. Smart cities promise to deliver a better life to their inhabitants while simultaneously reducing resource requirements and pollution. They are thus perceived as a key enabler to sustainable growth. Out of many other issues, one of the major concerns for most cities in the world is traffic, which leads to a huge waste of time and energy, and to increased pollution. To optimize traffic in cities, one of the first steps is to get accurate information in real time about the traffic flows in the city. This can be achieved through the application of automated video analytics to the video streams provided by a set of cameras distributed throughout the city. Image sequence processing can be performed both peripherally and centrally. In this paper, we argue that, since centralized processing has several advantages in terms of availability, maintainability and cost, it is a very promising strategy to enable effective traffic management even in large cities. However, the computational costs are enormous, and thus require an energy-efficient High-Performance Computing approach. Field Programmable Gate Arrays (FPGAs) provide comparable computational resources to CPUs and GPUs, yet require much lower amounts of energy per operation (around 6$$\times$$ and 10$$\times$$ for the application considered in this case study). They are thus preferred resources to reduce both energy supply and cooling costs in the huge datacenters that will be needed by Smart Cities. In this paper, we describe efficient implementations of high-performance algorithms that can process traffic camera image sequences to provide traffic flow information in real-time at a low energy and power cost

Digital image enhancement by brightness and contrast manipulation using Verilog hardware description language

A foggy environment may cause digitally captured images to appear blurry, dim, or low in contrast. This will impact computer vision systems that rely on image information. With the need for real-time image information, such as a plate number recognition system, a simple yet effective image enhancement algorithm using a hardware implementation is very much needed to fulfil the need. To improve images that suffer from low exposure and hazy, the hardware implementations are usually based on complex algorithms. Hence, the aim of this paper is to propose a less complex enhancement algorithm for hardware implementation that is able to improve the quality of such images. The proposed method simply combines brightness and contrast manipulation to enhance the image. In order to see the performance of the proposed method, a total of 100 vehicle registration number images were collected, enhanced, and evaluated. The evaluation results were compared to two other enhancement methods quantitatively and qualitatively. Quantitative evaluation is done by evaluating the output image using peak signal-to-noise ratio and mean-square error evaluation metrics, while a survey is done to evaluate the output image qualitatively. Based on the quantitative evaluation results, our proposed method outperforms the other two enhancement methods

Low cost radar and sonar using Open Source hardware and software

Includes abstract.Includes bibliographical references (leaves 89-91).The full range of radar types and innovations can be complex and difficult to prototype, especially for institutions that wish to perform a wide range of experiments for low financial cost. Radar and sonar system development can benefit from digital technology that is powerful for research purposes, easy to use, and inexpensive. The purpose of this thesis was the development of a sonar application using the Universal Software Radio Peripheral and the GNU Radio software framework. These are Open Source tools created for the software-defined radio community. These tools provide a powerful yet flexible means to experiment with a wide range of radio frequency applications, using a minimal amount of relatively cheap hardware. In this thesis, these tools were modified from their original telecommunications purpose, to produce a sonar system that could eventually be scaled to a prototype radar system using the same device and software framework

FPGA-based architectures for acoustic beamforming with microphone arrays : trends, challenges and research opportunities

Over the past decades, many systems composed of arrays of microphones have been developed to satisfy the quality demanded by acoustic applications. Such microphone arrays are sound acquisition systems composed of multiple microphones used to sample the sound field with spatial diversity. The relatively recent adoption of Field-Programmable Gate Arrays (FPGAs) to manage the audio data samples and to perform the signal processing operations such as filtering or beamforming has lead to customizable architectures able to satisfy the most demanding computational, power or performance acoustic applications. The presented work provides an overview of the current FPGA-based architectures and how FPGAs are exploited for different acoustic applications. Current trends on the use of this technology, pending challenges and open research opportunities on the use of FPGAs for acoustic applications using microphone arrays are presented and discussed