Combining FPGA prototyping and high-level simulation approaches for Design Space Exploration of MPSoCs

Modern embedded systems are parallel, component-based, heterogeneous and finely tuned on the basis of the workload that must be executed on them. To improve design reuse, Application Specific Instruction-set Processors (ASIPs) are often employed as building blocks in such systems, as a solution capable of satisfying the required functional and physical constraints (e.g. throughput, latency, power or energy consumption etc.), while providing, at the same time, high flexibility and adaptability. Composing a multi-processor architecture including ASIPs and mapping parallel applications onto it is a design activity that require an extensive Design Space Exploration process (DSE), to result in cost-effective systems. The work described here aims at defining novel methodologies for the application-driven customizations of such highly heterogeneous embedded systems. The issue is tackled at different levels, integrating different tools. High-level event-based simulation is a widely used technique that offers speed and flexibility as main points of strength, but needs, as a preliminary input and periodically during the iteration process, calibration data that must be acquired by means of more accurate evaluation methods. Typically, this calibration is performed using instruction-level cycleaccurate simulators that, however, turn out to be very slow, especially when complete multiprocessor systems must be evaluated or when the grain of the calibration is too fine, while FPGA approaches have shown to performbetter for this particular applications. FPGA-based emulation techniques have been proposed in the recent past as an alternative solution to the software-based simulation approach, but some further steps are needed before they can be effectively exploitedwithin architectural design space exploration. Firstly, some kind of technology-awareness must be introduced, to enable the translation of the emulation results into a pre-estimation of a prospective ASIC implementation of the design. Moreover, when performing architectural DSE, a significant number of different candidate design points has to be evaluated and compared. In this case, if no countermeasures are taken, the advantages achievable with FPGAs, in terms of emulation speed, are counterbalanced by the overhead introduced by the time needed to go through the physical synthesis and implementation flow. Developed FPGA-based prototyping platform overcomes such limitations, enabling the use of FPGA-based prototyping for micro-architectural design space exploration of ASIP processors. In this approach, to increase the emulation speed-up, two different methods are proposed: the first is based on automatic instantiation of additional hardware modules, able to reconfigure at runtime the prototype, while the second leverages manipulation of application binary code, compiled for a custom VLIW ASIP architecture, that is transformed into code executable on a different configuration. This allows to prototype a whole set of ASIP solutions after one single FPGA implementation flow, mitigating the afore-mentioned overhead.A short overview on the tools used throughout the work will also be offered, covering basic aspects of Intel-Silicon Hive ASIP development toolchain, SESAME framework general description, along with a review of state-of-art simulation and prototyping techniques for complex multi-processor systems. Each proposed approach will be validated through a real-world use case, confirming the validity of this solution

Combining FPGA prototyping and high-level simulation approaches for Design Space Exploration of MPSoCs

Modern embedded systems are parallel, component-based, heterogeneous and finely tuned on the basis of the workload that must be executed on them. To improve design reuse, Application Specific Instruction-set Processors (ASIPs) are often employed as building blocks in such systems, as a solution capable of satisfying the required functional and physical constraints (e.g. throughput, latency, power or energy consumption etc.), while providing, at the same time, high flexibility and adaptability. Composing a multi-processor architecture including ASIPs and mapping parallel applications onto it is a design activity that require an extensive Design Space Exploration process (DSE), to result in cost-effective systems. The work described here aims at defining novel methodologies for the application-driven customizations of such highly heterogeneous embedded systems. The issue is tackled at different levels, integrating different tools. High-level event-based simulation is a widely used technique that offers speed and flexibility as main points of strength, but needs, as a preliminary input and periodically during the iteration process, calibration data that must be acquired by means of more accurate evaluation methods. Typically, this calibration is performed using instruction-level cycleaccurate simulators that, however, turn out to be very slow, especially when complete multiprocessor systems must be evaluated or when the grain of the calibration is too fine, while FPGA approaches have shown to performbetter for this particular applications. FPGA-based emulation techniques have been proposed in the recent past as an alternative solution to the software-based simulation approach, but some further steps are needed before they can be effectively exploitedwithin architectural design space exploration. Firstly, some kind of technology-awareness must be introduced, to enable the translation of the emulation results into a pre-estimation of a prospective ASIC implementation of the design. Moreover, when performing architectural DSE, a significant number of different candidate design points has to be evaluated and compared. In this case, if no countermeasures are taken, the advantages achievable with FPGAs, in terms of emulation speed, are counterbalanced by the overhead introduced by the time needed to go through the physical synthesis and implementation flow. Developed FPGA-based prototyping platform overcomes such limitations, enabling the use of FPGA-based prototyping for micro-architectural design space exploration of ASIP processors. In this approach, to increase the emulation speed-up, two different methods are proposed: the first is based on automatic instantiation of additional hardware modules, able to reconfigure at runtime the prototype, while the second leverages manipulation of application binary code, compiled for a custom VLIW ASIP architecture, that is transformed into code executable on a different configuration. This allows to prototype a whole set of ASIP solutions after one single FPGA implementation flow, mitigating the afore-mentioned overhead.A short overview on the tools used throughout the work will also be offered, covering basic aspects of Intel-Silicon Hive ASIP development toolchain, SESAME framework general description, along with a review of state-of-art simulation and prototyping techniques for complex multi-processor systems. Each proposed approach will be validated through a real-world use case, confirming the validity of this solution

Combining on-hardware prototyping and high level simulation for DSE of multi-ASIP system

Abstract-Modern heterogeneous multi-processor embedded systems very often expose to the designer a large number of degrees of freedom, related to the application partitioning/mapping and to the component-and system-level architecture composition. The number is even larger when the designer targets systems based on configurable Application Specific Instructionset Processors, due to the fine customizability of their internal architecture. This poses the need for effective and user-friendly design tools, capable to deal with the extremely wide systemlevel design space exposed by multi-processor architecture and, at the same time, with an extended variety of processing element architectural configurations, to be evaluated in detail and in reasonable times. As a possible solution, within the MADNESS project [1], an integrated toolset has been proposed, combining the benefits of novel fast FPGA-based prototyping techniques with those provided by high-level simulation. In the toolset, the resulting evaluation platform serves as an underlying layer for a Design Space search algorithm. The paper presents the individual tools included in the toolset and their interaction strategy. The approach is then evaluated with a design space exploration case study, taking as a target application a video compression kernel. The integrated toolset has been used to produce a Pareto front of evaluated system-level configurations

MURAC: A unified machine model for heterogeneous computers

Includes bibliographical referencesHeterogeneous computing enables the performance and energy advantages of multiple distinct processing architectures to be efficiently exploited within a single machine. These systems are capable of delivering large performance increases by matching the applications to architectures that are most suited to them. The Multiple Runtime-reconfigurable Architecture Computer (MURAC) model has been proposed to tackle the problems commonly found in the design and usage of these machines. This model presents a system-level approach that creates a clear separation of concerns between the system implementer and the application developer. The three key concepts that make up the MURAC model are a unified machine model, a unified instruction stream and a unified memory space. A simple programming model built upon these abstractions provides a consistent interface for interacting with the underlying machine to the user application. This programming model simplifies application partitioning between hardware and software and allows the easy integration of different execution models within the single control ow of a mixed-architecture application. The theoretical and practical trade-offs of the proposed model have been explored through the design of several systems. An instruction-accurate system simulator has been developed that supports the simulated execution of mixed-architecture applications. An embedded System-on-Chip implementation has been used to measure the overhead in hardware resources required to support the model, which was found to be minimal. An implementation of the model within an operating system on a tightly-coupled reconfigurable processor platform has been created. This implementation is used to extend the software scheduler to allow for the full support of mixed-architecture applications in a multitasking environment. Different scheduling strategies have been tested using this scheduler for mixed-architecture applications. The design and implementation of these systems has shown that a unified abstraction model for heterogeneous computers provides important usability benefits to system and application designers. These benefits are achieved through a consistent view of the multiple different architectures to the operating system and user applications. This allows them to focus on achieving their performance and efficiency goals by gaining the benefits of different execution models during runtime without the complex implementation details of the system-level synchronisation and coordination

ASAM: Automatic Architecture Synthesis and Application Mapping,

Abstract -This paper focuses on mastering the automatic architecture synthesis and application mapping for heterogeneous massively-parallel MPSoCs based on customizable applicationspecific instruction-set processors (ASIPs). It presents an overview of the research being currently performed in the scope of the European project ASAM (Architecture Synthesis and Application Mapping) of the ARTEMIS program. The paper briefly presents the results of our analysis of the main problems to be solved and challenges to be faced in the design of such heterogeneous MPSoCs. It explains which system, design, and electronic design automation (EDA) concepts seem to be adequate to resolve the problems and address the challenges. Finally, it introduces and briefly discusses the design-flow and its main stages proposed by the ASAM project consortium to enable an effective and efficient solution of these problems. Index Terms-embedded systems, heterogeneous multiprocessor system-on-chip (MPSoC), customizable ASIPs, architecture synthesis, MPSoC and ASIP design automation

ASAM: Automatic Architecture Synthesis and Application Mapping

This paper focuses on mastering the automatic architecture synthesis and application mapping for heterogeneous massively-parallel MPSoCs based on customizable application-specific instruction-set processors (ASIPs). It presents an over-view of the research being currently performed in the scope of the European project ASAM of the ARTEMIS program. The paper briefly presents the results of our analysis of the main problems to be solved and challenges to be faced in the design of such heterogeneous MPSoCs. It explains which system, design, and electronic design automation (EDA) concepts seem to be adequate to resolve the problems and address the challenges. Finally, it introduces and briefly discusses the ASAM design-flow and its main stages