1,523 research outputs found
Redundant Logic Insertion and Fault Tolerance Improvement in Combinational Circuits
This paper presents a novel method to identify and insert redundant logic
into a combinational circuit to improve its fault tolerance without having to
replicate the entire circuit as is the case with conventional redundancy
techniques. In this context, it is discussed how to estimate the fault masking
capability of a combinational circuit using the truth-cum-fault enumeration
table, and then it is shown how to identify the logic that can introduced to
add redundancy into the original circuit without affecting its native
functionality and with the aim of improving its fault tolerance though this
would involve some trade-off in the design metrics. However, care should be
taken while introducing redundant logic since redundant logic insertion may
give rise to new internal nodes and faults on those may impact the fault
tolerance of the resulting circuit. The combinational circuit that is
considered and its redundant counterparts are all implemented in semi-custom
design style using a 32/28nm CMOS digital cell library and their respective
design metrics and fault tolerances are compared
Fault-tolerance techniques for hybrid CMOS/nanoarchitecture
The authors propose two fault-tolerance techniques for hybrid CMOS/nanoarchitecture implementing logic functions as look-up tables. The authors compare the efficiency of the proposed techniques with recently reported methods that use single coding schemes in tolerating high fault rates in nanoscale fabrics. Both proposed techniques are based on error correcting codes to tackle different fault rates. In the first technique, the authors implement a combined two-dimensional coding scheme using Hamming and Bose-Chaudhuri-Hocquenghem (BCH) codes to address fault rates greater than 5. In the second technique, Hamming coding is complemented with bad line exclusion technique to tolerate fault rates higher than the first proposed technique (up to 20). The authors have also estimated the improvement that can be achieved in the circuit reliability in the presence of Don-t Care Conditions. The area, latency and energy costs of the proposed techniques were also estimated in the CMOS domain
Improved Fault Tolerant SRAM Cell Design & Layout in 130nm Technology
Technology scaling of CMOS devices has made the integrated circuits vulnerable to single event radiation effects. Scaling of CMOS Static RAM (SRAM) has led to denser packing architectures by reducing the size and spacing of diffusion nodes. However, this trend has led to the increase in charge collection and sharing effects between devices during an ion strike, making the circuit even more vulnerable to a specific single event effect called the single event multiple-node upset (SEMU). In nanometer technologies, SEMU can easily disrupt the data stored in the memory and can be more hazardous than a single event single-node upset.
During the last decade, most of the research efforts were mainly focused on improving the single event single-node upset tolerance of SRAM cells by using novel circuit techniques, but recent studies relating to angular radiation sensitivity has revealed the importance of SEMU and Multi Bit Upset (MBU) tolerance for SRAM cells. The research focuses on improving SEMU tolerance of CMOS SRAM cells by using novel circuit and layout level techniques. A novel SRAM cell circuit & layout technique is proposed to improve the SEMU tolerance of 6T SRAM cells with decreasing feature size, making it an ideal candidate for future technologies. The layout is based on strategically positioning diffusion nodes in such a way as to provide charge cancellation among nodes during SEMU radiation strikes, instead of charge build-up. The new design & layout technique can improve the SEMU tolerance levels by up to 20 times without sacrificing on area overhead and hence is suitable for high density SRAM designs in commercial applications. Finally, laser testing of SRAM based configuration memory of a Xilinx Virtex-5 FPGA is performed to analyze the behavior of SRAM based systems towards radiation strikes
縦型ボディチャネルMOS Field-Effect Transistorを用いたマイクロプロセッサ向け高効率・高集積DC-DCコンバータとそのパワーマネジメントに関する研究
Tohoku University遠藤哲郎課
Reliability-energy-performance optimisation in combinational circuits in presence of soft errors
PhD ThesisThe reliability metric has a direct relationship to the amount of value produced
by a circuit, similar to the performance metric. With advances in CMOS
technology, digital circuits become increasingly more susceptible to soft errors.
Therefore, it is imperative to be able to assess and improve the level of reliability
of these circuits. A framework for evaluating and improving the reliability of
combinational circuits is proposed, and an interplay between the metrics of
reliability, energy and performance is explored.
Reliability evaluation is divided into two levels of characterisation: stochastic
fault model (SFM) of the component library and a design-specific critical vector
model (CVM). The SFM captures the properties of components with regard to
the interference which causes error. The CVM is derived from a limited number
of simulation runs on the specific design at the design time and producing
the reliability metric. The idea is to move the high-complexity problem of the
stochastic characterisation of components to the generic part of the design
process, and to do it just once for a large number of specific designs. The
method is demonstrated on a range of circuits with various structures.
A three-way trade-off between reliability, energy, and performance has
been discovered; this trade-off facilitates optimisations of circuits and their
operating conditions.
A technique for improving the reliability of a circuit is proposed, based on
adding a slow stage at the primary output. Slow stages have the ability to
absorb narrow glitches from prior stages, thus reducing the error probability.
Such stages, or filters, suppress most of the glitches generated in prior stages
and prevent them from arriving at the primary output of the circuit. Two filter
solutions have been developed and analysed. The results show a dramatic
improvement in reliability at the expense of minor performance and energy
penalties.
To alleviate the problem of the time-consuming analogue simulations involved in the proposed method, a simplification technique is proposed. This
technique exploits the equivalence between the properties of the gates within
a path and the equivalence between paths. On the basis of these equivalences,
it is possible to reduce the number of simulation runs. The effectiveness of
the proposed technique is evaluated by applying it to different circuits with
a representative variety of path topologies. The results show a significant
decrease in the time taken to estimate reliability at the expense of a minor
decrease in the accuracy of estimation. The simplification technique enables
the use of the proposed method in applications with complex circuits.Ministry of Education and Scientific Research in Liby
Reliable Low-Latency and Low-Complexity Viterbi Architectures Benchmarked on ASIC and FPGA
The Viterbi algorithm is commonly applied in a number of sensitive usage models including decoding convolutional codes used in communications such as satellite communication, cellular relay, and wireless local area networks. Moreover, the algorithm has been applied to automatic speech recognition and storage devices. In this thesis, efficient error detection schemes for architectures based on low-latency, low-complexity Viterbi decoders are presented. The merit of the proposed schemes is that reliability requirements, overhead tolerance, and performance degradation limits are embedded in the structures and can be adapted accordingly. We also present three variants of recomputing with encoded operands and its modifications to detect both transient and permanent faults, coupled with signature-based schemes. The instrumented decoder architecture has been subjected to extensive error detection assessments through simulations, and application-specific integrated circuit (ASIC) [32nm library] and field-programmable gate array (FPGA) [Xilinx Virtex-6 family] implementations for benchmark. The proposed fine-grained approaches can be utilized based on reliability objectives and performance/implementation metrics degradation tolerance
On Fault Tolerance Methods for Networks-on-Chip
Technology scaling has proceeded into dimensions in which the reliability of manufactured devices is becoming endangered. The reliability decrease is a consequence of physical limitations, relative increase of variations, and decreasing noise margins, among others. A promising solution for bringing the reliability of circuits back to a desired level is the use of design methods which introduce tolerance against possible faults in an integrated circuit.
This thesis studies and presents fault tolerance methods for network-onchip (NoC) which is a design paradigm targeted for very large systems-onchip. In a NoC resources, such as processors and memories, are connected to a communication network; comparable to the Internet. Fault tolerance in such a system can be achieved at many abstraction levels.
The thesis studies the origin of faults in modern technologies and explains the classification to transient, intermittent and permanent faults. A survey of fault tolerance methods is presented to demonstrate the diversity of available methods. Networks-on-chip are approached by exploring their main design choices: the selection of a topology, routing protocol, and flow control method. Fault tolerance methods for NoCs are studied at different layers of the OSI reference model.
The data link layer provides a reliable communication link over a physical channel. Error control coding is an efficient fault tolerance method especially against transient faults at this abstraction level. Error control coding methods suitable for on-chip communication are studied and their implementations presented. Error control coding loses its effectiveness in the presence of intermittent and permanent faults. Therefore, other solutions against them are presented. The introduction of spare wires and split transmissions are shown to provide good tolerance against intermittent and permanent errors and their combination to error control coding is illustrated.
At the network layer positioned above the data link layer, fault tolerance can be achieved with the design of fault tolerant network topologies and routing algorithms. Both of these approaches are presented in the thesis together with realizations in the both categories. The thesis concludes that an optimal fault tolerance solution contains carefully co-designed elements from different abstraction levelsSiirretty Doriast
Digital Design Techniques for Dependable High Performance Computing
As today’s process technologies continuously scale down, circuits become increasingly more vulnerable to radiation-induced soft errors in nanoscale VLSI technologies. The reduction of node capacitance and supply voltages coupled with increasingly denser chips are raising soft error rates and making them an important design issue. This research work is focused on the development of design techniques for high-reliability modern VLSI technologies, focusing mainly on Radiation-induced Single Event Transient. In this work, we evaluate the complete life-cycle of the SET pulse from the generation to the mitigation. A new simulation tool, Rad-Ray, has been developed to simulate and model the passage of heavy ion into the silicon matter of modern Integrated Circuit and predict the transient voltage pulse taking into account the physical description of the design. An analysis and mitigation tool has been developed to evaluate the propagation of the predicted SET pulses within the circuit and apply a selective mitigation technique to the sensitive nodes of the circuit. The analysis and mitigation tools have been applied to many industrial projects as well as the EUCLID space mission project, including more than ten modules. The obtained results demonstrated the effectiveness of the proposed tools
- …