Immersive Virtual Reality for Cultural Heritage Exploration

Virtual Reality can provide an immersive experience that allows cultural heritage to be experienced in a more realistic and immersive way than traditional showcasing techniques. The objective of this paper is to provide a software pipeline that can be adopted for the realization of immersive experiences in cultural heritage sites. This work has been realized within the 3DLab-Sicilia project, which includes the realization of immersive virtual tours of UNESCO World Heritage sites located in the Sicily area (Italy)

3D Visualization Techniques in Health Science Learning. Application case of Thermographic Images to Blood Flow Monitoring

The present work proposes a new learning methodology based on the combination of geotechnologies for the acquisition of competence in the studies of physiotherapy and nursery. The approach is based on three-dimensional visualization techniques over thermographic images to improve the comprehension and interpretation of blood flow. The proposal is aimed to be applied in practical sessions of subjects of the area of knowledge of the Physiology, to demonstrate through the geotechnologies, the effect of the application of the changes of the flow blood. The present approach is related to the virtual laboratories field, since the generated virtual material can be used for acquisition of practical skills and competences, as well as evaluation of competencies in e-learning courses. The learning material is structured to be easily deployed in a learning management system, allowing the students to work with the models by means of open-source solutions without an additional effor

Técnicas de registro 3D para documentación de objetos patrimoniales

La mayoría de las instituciones museísticas argentinas utilizan en general la fotografía y los dibujos a mano alzada, como técnicas de registro para la documentación de sus colecciones. Con estas técnicas la información adquirida no suele mostrar detalles de las formas y textura de los objetos limitando el análisis de la materialidad de las piezas y los estudios sobre las piezas involucran la manipulación continua de las mismas. En este trabajo se presentan resultados de un proyecto en curso, cuyo objetivo es el desarrollo de sistemas de registro en 3 dimensiones, de bajo costo, fácil acceso y procesamientos con software libre, para aplicaciones en documentación y conservación de patrimonio cultural. Las técnicas implementadas son Fotogrametría Digital, Escaneo con Láser, luz estructurada y Reflectancia (Reflectance Transformation Imaging -RTI). Se discuten las ventajas y limitaciones de cada una de estas técnicas para la documentación de objetos patrimoniales.Tópico 5: Conservación y restauración de bienes muebles y piezas (documentos de archivos, pinturas, cueros, maderas, textiles, metales, rocas ornamentales, vitrales, etc.)

Monte Carlo-based 3D surface point cloud volume estimation by exploding local cubes faces

This article proposes a state-of-the-art algorithm for estimating the 3D volume enclosed in a surface point cloud via a modified extension of the Monte Carlo integration approach. The algorithm consists of a pre-processing of the surface point cloud, a sequential generation of points managed by an affiliation criterion, and the final computation of the volume. The pre-processing phase allows a spatial reorientation of the original point cloud, the evaluation of the homogeneity of its points distribution, and its enclosure inside a rectangular parallelepiped of known volume. The affiliation criterion using the explosion of cube faces is the core of the algorithm, handles the sequential generation of points, and proposes the effective extension of the traditional Monte Carlo method by introducing its applicability to the discrete domains. Finally, the final computation estimates the volume as a function of the total amount of generated points, the portion enclosed within the surface point cloud, and the parallelepiped volume. The developed method proves to be accurate with surface point clouds of both convex and concave solids reporting an average percentage error of less than 7 %. It also shows considerable versatility in handling clouds with sparse, homogeneous, and sometimes even missing points distributions. A performance analysis is presented by testing the algorithm on both surface point clouds obtained from meshes of virtual objects as well as from real objects reconstructed using reverse engineering techniques

Photonic Methods Applied to Heritage Conservation in Argentina

As part of an ongoing program performed in collaboration with museums and institutions of Argentina, we present results on the application of laser based techniques and 3D imaging methods for material characterization, cleaning and documentation of cultural heritage objects, particularly the collections of public museums located in different regions of the country. In this work, we present results on the application of Laser Induced Breakdown Spectroscopy (LIBS) for material characterization of objects found in the ex-detention, torture and extermination center called Club Atletico (Instituto Espacio Memoria) of Buenos Aires. We also show laser cleaning applications to archaeological objects found in Patagonia and in the city of Buenos Aires. Finally, we present a 3D system developed for recording and documentation of artworks. It is based on digital photogrammetry and uses low cost devices and free software for data processing. This 3D system has measurement tools and thepossibility of creating deterioration maps in the virtual model. We present examples of the applications of this 3D system to artworks from argentine museums.Facultad de IngenieríaCentro de Investigaciones Óptica

Photonic Methods Applied to Heritage Conservation in Argentina

As part of an ongoing program performed in collaboration with museums and institutions of Argentina, we present results on the application of laser based techniques and 3D imaging methods for material characterization, cleaning and documentation of cultural heritage objects, particularly the collections of public museums located in different regions of the country. In this work, we present results on the application of Laser Induced Breakdown Spectroscopy (LIBS) for material characterization of objects found in the ex-detention, torture and extermination center called Club Atletico (Instituto Espacio Memoria) of Buenos Aires. We also show laser cleaning applications to archaeological objects found in Patagonia and in the city of Buenos Aires. Finally, we present a 3D system developed for recording and documentation of artworks. It is based on digital photogrammetry and uses low cost devices and free software for data processing. This 3D system has measurement tools and thepossibility of creating deterioration maps in the virtual model. We present examples of the applications of this 3D system to artworks from argentine museums.Facultad de IngenieríaCentro de Investigaciones Óptica

body2vec: 3D Point Cloud Reconstruction for Precise Anthropometry with Handheld Devices

Current point cloud extraction methods based on photogrammetry generate large amounts of spurious detections that hamper useful 3D mesh reconstructions or, even worse, the possibility of adequate measurements. Moreover, noise removal methods for point clouds are complex, slow and incapable to cope with semantic noise. In this work, we present body2vec, a model-based body segmentation tool that uses a specifically trained Neural Network architecture. Body2vec is capable to perform human body point cloud reconstruction from videos taken on hand-held devices (smartphones or tablets), achieving high quality anthropometric measurements. The main contribution of the proposed workflow is to perform a background removal step, thus avoiding the spurious points generation that is usual in photogrammetric reconstruction. A group of 60 persons were taped with a smartphone, and the corresponding point clouds were obtained automatically with standard photogrammetric methods. We used as a 3D silver standard the clean meshes obtained at the same time with LiDAR sensors post-processed and noise-filtered by expert anthropological biologists. Finally, we used as gold standard anthropometric measurements of the waist and hip of the same people, taken by expert anthropometrists. Applying our method to the raw videos significantly enhanced the quality of the results of the point cloud as compared with the LiDAR-based mesh, and of the anthropometric measurements as compared with the actual hip and waist perimeter measured by the anthropometrists. In both contexts, the resulting quality of body2vec is equivalent to the LiDAR reconstruction.Fil: Trujillo Jiménez, Magda Alexandra. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Navarro, Pablo Eugenio. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentina. Universidad Nacional de la Patagonia "San Juan Bosco"; ArgentinaFil: Pazos, Bruno Alfredo. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; Argentina. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Morales, Arturo Leonardo. Universidad Nacional de la Patagonia "San Juan Bosco"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentina. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; ArgentinaFil: Ramallo, Virginia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Paschetta, Carolina Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: de Azevedo, Soledad. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Ruderman, Anahí. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Perez, Luis Orlando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; ArgentinaFil: Delrieux, Claudio Augusto. Universidad Nacional del Sur. Departamento de Ingeniería Eléctrica y de Computadoras; ArgentinaFil: Gonzalez-Jose, Rolando. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Centro Nacional Patagónico. Instituto Patagónico de Ciencias Sociales y Humanas; Argentin

Simple and Robust Boolean Operations for Triangulated Surfaces

Boolean operations of geometric models is an essential issue in computational geometry. In this paper, we develop a simple and robust approach to perform Boolean operations on closed and open triangulated surfaces. Our method mainly has two stages: (1) We firstly find out candidate intersected-triangles pairs based on Octree and then compute the inter-section lines for all pairs of triangles with parallel algorithm; (2) We form closed or open intersection-loops, sub-surfaces and sub-blocks quite robustly only according to the cleared and updated topology of meshes while without coordinate computations for geometric enti-ties. A novel technique instead of inside/outside classification is also proposed to distinguish the resulting union, subtraction and intersection. Several examples have been given to illus-trate the effectiveness of our approach.Comment: Novel method for determining Union, Subtraction and Intersectio

Point Normal Orientation and Surface Reconstruction by Incorporating Isovalue Constraints to Poisson Equation

Oriented normals are common pre-requisites for many geometric algorithms based on point clouds, such as Poisson surface reconstruction. However, it is not trivial to obtain a consistent orientation. In this work, we bridge orientation and reconstruction in implicit space and propose a novel approach to orient point clouds by incorporating isovalue constraints to the Poisson equation. Feeding a well-oriented point cloud into a reconstruction approach, the indicator function values of the sample points should be close to the isovalue. Based on this observation and the Poisson equation, we propose an optimization formulation that combines isovalue constraints with local consistency requirements for normals. We optimize normals and implicit functions simultaneously and solve for a globally consistent orientation. Owing to the sparsity of the linear system, an average laptop can be used to run our method within reasonable time. Experiments show that our method can achieve high performance in non-uniform and noisy data and manage varying sampling densities, artifacts, multiple connected components, and nested surfaces