An Efficiency-Focused Design of Direct-DC Loads in Buildings

Despite the recent interest in direct current (DC) power distribution in buildings, the market for DC-ready loads remains small. The existing DC loads in various products or research test beds are not always designed to efficiently leverage the benefits of DC. This work addresses a pressing need for a study into the development of efficient DC loads. In particular, it focuses on documenting and demonstrating how to best leverage a DC input to eliminate or improve conversion stages in a load’s power converter. This work identifies how typical building loads can benefit from DC input, including bath fans, refrigerators, task lights, and zone lighting. It then details the development of several prototypes that demonstrate efficiency savings with DC. The most efficient direct-DC loads are explicitly designed for DC from the ground up, rather than from an AC modification

Comparative life cycle assessment of lighting systems and road pavements in an Italian twin- tube road tunnel

This work calculates and discusses the Life Cycle Assessment (LCA) of four scenarios composed of two types of road pavements and two types of lighting systems to be built in an Italian twin-tube road tunnel. A 20-year time horizon is adopted to assess the burdens of construction and maintenance of both flexible and rigid pavements and high-pressure sodium (HPS) and lightemitting diode (LED) lamps, traffic, and switching on of lamps. All considered scenarios are comparable with each other in terms of technical performances, but significantly differ regarding their environmental consequences. The geometrical and technical characteristics of the examined scenarios comply with current Italian standards for highways. In all the examined cases, LCA is carried out according to the European standard, EN 15804, and includes 19 impact categories (IC). The analysis demonstrates that the use of more reflecting surface pavement materials (i.e., concrete vs. asphalt) and more performing lighting systems (i.e., LED vs. HPS) can effectively mitigate the deleterious burdens related to road construction, maintenance, and use. For most of the examined ICs, the most environment-friendly scenario has LED lamps and concrete pavement

A Non-Electrolytic-Capacitor Low-Power AC-DC Single-Stage SEPIC-Flyback LED Converter

This paper presents an isolated single-stage SEPIC-flyback ac-dc converter for supplying light emitting diode (LED) that can eliminate electrolytic capacitor adoption. The Single Ended Primary Inductor Converter (SEPIC) converter performs the power factor correction (PFC) function, while the flyback converter regulates the DC stage and provides circuit isolation for LED protection. This paper analyses the operation of the proposed LED topology and verifies the performance of the circuit using PSCAD simulation. The converter achieved a high power factor, low total harmonic distortion and low output voltage ripple. The proposed circuit also obtained voltage below 450 V across the storage capacitor, allowing low voltage rating components employment

Novel self-configurable current-mirror techniques for reducing current imbalance in parallel Light-Emitting Diode (LED) strings

Traditional current-mirror methods require one fixed current reference for controlling other current source or sources. In this paper, a new self-configurable current-mirror method that can dynamically determine the best current branch as the current reference in order to ensure good balance of all parallel current sources is proposed. The operating principle involves a dynamic and self-configurable transistor-based current-balancing circuit that can be operated in saturation or linear mode. In either operating mode, good current balance or sharing among all parallel-connected current sources can be guaranteed. The novel current-balancing circuit does not require a separate power supply for powering their control circuits. The proposal is a modular one that can be expanded to any number of parallel current sources. Its principle has been successfully applied to current balancing of parallel LED strings. © 2011 IEEE.published_or_final_versio

Fault Tolerant DC–DC Converters at Homes and Offices

The emergence of direct current (DC) microgrids within the context of residential buildings and offices brings in a whole new paradigm in energy distribution. As a result, a set of technical challenges arise, concerning the adoption of efficient, cost-effective, and reliable DC-compatible power conditioning solutions, suitable to interface DC microgrids and energy consuming elements. This thesis encompasses the development of DC–DC power conversion solutions, featuring improved availability and efficiency, suitable to meet the requirements of a comprehensive set of end-uses commonly found in homes and offices. Based on the energy consumption profiles and requirements of the typical elements found at homes and offices, three distinctive groups are established: light-emitting diode (LED) lighting, electric vehicle (EV) charging, and general appliances. For each group, a careful evaluation of the criteria to fulfil is performed, based on which at least one DC–DC power converter is selected and investigated. Totally, a set of five DC–DC converter topologies are addressed in this work, being specific aspects related to fault diagnosis and/or fault tolerance analysed with particular detail in two of them. Firstly, mathematical models are described for LED devices and EV batteries, for the development of a theoretical analysis of the systems’ operation through computational simulations. Based on a compilation of requirements to account for in each end-use (LED lighting, EV charging, and general appliances), brief design considerations are drawn for each converter topology, regarding their architecture and control strategy. Aiming a detailed understanding of the two DC–DC power conversion systems subjected to thorough evaluation in this work – interleaved boost converter and fault-tolerant single-inductor multiple-output (SIMO) converter – under both normal and abnormal conditions, the operation of the systems is evaluated in the presence of open-circuit (OC) faults. Parameters of interest are monitored and evaluated to understand how the failures impact the operation of the entire system. At this stage, valuable information is obtained for the development of fault diagnosis strategies. Taking profit of the data collected in the analysis, a novel fault diagnostic strategy is presented, targeting interleaved DC–DC boost converters for general appliances. Ease of implementation, fast diagnostic and robustness against false alarms distinguish the proposed approach over the state-of-the-art. Its effectiveness is confirmed through a set of operation scenarios, implemented in both simulation environment and experimental context. Finally, an extensive set of reconfiguration strategies is presented and evaluated, aiming to grant fault tolerance capability to the multiple DC–DC converter topologies under analysis. A hybrid reconfiguration approach is developed for the interleaved boost converter. It is demonstrated that the combination of reconfiguration strategies promotes remarkable improvements on the post-fault operation of the converter. In addition, an alternative SIMO converter architecture, featuring inherent tolerance against OC faults, is presented and described. To exploit the OC fault tolerance capability of the fault-tolerant SIMO converter, a converter topology targeted at residential LED lighting systems, two alternative reconfiguration strategies are presented and evaluated in detail. Results obtained from computational simulations and experimental tests confirm the effectiveness of the approaches. To further improve the fault-tolerant SIMO converter with regards to its robustness against sensor faults, while simplifying its hardware architecture, a sensorless current control strategy is presented. The proposed control strategy is evaluated resorting to computational simulations.O surgimento de micro-redes em corrente contínua (CC) em edifícios residenciais e de escritórios estabelece um novo paradigma no domínio da distribuição de energia. Como consequência disso, surge uma panóplia de desafios técnicos ligados à adopção de soluções de conversão de energia, compatíveis com CC, que demonstrem ser eficientes, rentáveis e fiáveis, capazes de estabelecer a interface entre micro-redes em CC e as cargas alimentadas por esse sistema de energia. Até aos dias de hoje, os conversores CC–CC têm vindo a ser maioritariamente utilizados em aplicações de nicho, que geralmente envolvem níveis de potência reduzidos. Porém, as perspectivas futuras apontam para a adopção, em larga escala, destas tecnologias de conversão de energia, também em equipamentos eléctricos residenciais e de escritórios. Tal como qualquer outra tecnologia de conversão electrónica de potência, os conversores CC–CC podem ver o seu funcionamento afectado por falhas que degradam o seu bom funcionamento, sendo que essas falhas acabam por afectar não apenas os conversores em si, mas também as cargas que alimentam, limitando assim o tempo de vida útil do conjunto conversor + carga. Desta forma, é fulcral localizar a origem da falha, para que possam ser adoptadas acções correctivas, capazes de limitar as consequências nefastas associadas à falha. Para responder a este desafio, esta tese contempla o desenvolvimento de soluções de conversão de energia CC–CC altamente eficientes e fiáveis, capazes de responder a requisitos impostos por um conjunto alargado de equipamentos frequentemente encontrados em habitações e escritórios. Com base nos perfis de consumo de energia eléctrica e nos requisitos impostos pelas cargas tipicamente utilizadas em habitações e escritórios, são estabelecidos três grupos distintos: iluminação através de díodos emissores de luz, carregamento de veículo eléctrico (VE) e aparelhos eléctricos em geral. Para cada grupo, é efectuada uma avaliação cuidadosa dos critérios a respeitar, sendo com base nesses critérios que será escolhida e investigada pelo menos uma topologia de conversor CC–CC. No total, são abordadas cinco topologias de conversores CC–CC distintas, sendo que os aspectos ligados ao diagnóstico de avarias e/ou tolerância a falhas são analisados com particular detalhe em duas dessas topologias. Inicialmente, são estabelecidos modelos matemáticos descritivos do comportamento das principais cargas consideradas no estudo – díodos emissores de luz e baterias de VEs – visando a análise teórica do funcionamento dos sistemas em estudo, suportada por simulações computacionais. Com base numa compilação de requisitos a ter em conta em cada aplicação – iluminação através de díodos emissores de luz, carregamento de veículo eléctrico (VE) e aparelhos eléctricos em geral – são estabelecidas considerações ligadas à escolha de cada topologia de conversor não isolado, no que respeita à sua arquitectura e estratégia de controlo. Visando o conhecimento aprofundado das duas topologias de conversor CC–CC alvo de particular enfoque neste trabalho – conversor entrelaçado elevador e conversor de entrada única e múltiplas saídas, tolerante a falhas – quer em funcionamento normal, quer em funcionamento em modo de falha, é avaliado o funcionamento de ambas as topologias na presença de falhas de circuito aberto nos semicondutores activos. Para o efeito, são monitorizados e analisados parâmetros úteis à percepção da forma como os modos de falha avaliados neste trabalho impactam o funcionamento de todo o sistema. Nesta fase, é obtida informação fundamental ao desenvolvimento de estratégias de diagnóstico de avarias, particularmente indicadas para avarias de circuito aberto nos semicondutores activos dos conversores em estudo. Com base na informação recolhida anteriormente, é apresentada uma nova estratégia de diagnóstico de avarias direccionada a conversores CC–CC elevadores entrelaçados utilizados em aparelhos eléctricos, em geral. Facilidade de implementação, rapidez e robustez contra falsos positivos são algumas das características que distinguem a estratégia proposta em relação ao estado da arte. A sua efectividade é confirmada com recurso a uma multiplicidade de cenários de funcionamento, implementados quer em ambiente de simulação, quer em contexto experimental. Por fim, é apresentada e avaliada uma gama alargada de estratégias de reconfiguração, que visam assegurar a tolerância a falhas das diversas topologias de conversores CC–CC em estudo. É desenvolvida uma estratégia de reconfiguração híbrida, direccionada ao conversor entrelaçado elevador, que combina múltiplas medidas de reconfiguração mais simples num único procedimento. Demonstra-se que a combinação de múltiplas estratégias de reconfiguração introduz melhorias substanciais no funcionamento do conversor ao longo do período pós-falha, ao mesmo tempo que assegura a manutenção da qualidade da energia à entrada e saída do conversor reconfigurado. Noutra frente, é apresentada e descrita uma arquitectura alternativa do conversor de entrada única e múltiplas saídas, com tolerância a falhas de circuito aberto. Através da configuração proposta, é possível manter o fornecimento de energia eléctrica a todas as saídas do conversor. Para tirar máximo proveito da tolerância a falhas do conversor de entrada única e múltiplas saídas, uma topologia de conversor indicada para sistemas residenciais de iluminação baseados em díodos emissores de luz, são apresentadas e avaliadas duas estratégias de reconfiguração do conversor, exclusivamente baseadas na adaptação do controlo aplicado ao conversor. Os resultados de simulação computacional e os resultados experimentais obtidos confirmam a efectividade das abordagens adoptadas, através da melhoria da qualidade da energia eléctrica fornecida às diversas saídas do conversor. São assim asseguradas condições essenciais ao funcionamento ininterrupto e estável dos sistemas de iluminação, já que a qualidade da energia eléctrica fornecida aos sistemas de iluminação tem impacto directo na qualidade da luz produzida. Por fim, e para aprimorar o conversor de entrada única e múltiplas saídas tolerante a falhas, no que respeita à sua robustez contra falhas em sensores, é apresentada uma estratégia de controlo de corrente que evita o recurso excessivo a sensores e, ao mesmo tempo, simplifica a estrutura de controlo do conversor. A estratégia apresentada é avaliada através de simulações computacionais. A abordagem apresentada assume vantagens em múltiplos domínios, sendo de destacar vantagens como a melhoria da fiabilidade de todo o sistema de iluminação (conversor + carga), os ganhos atingidos ao nível do rendimento, a redução do custo de implementação da solução, ou a simplificação da estrutura de controlo.This work was supported by the Portuguese Foundation for Science and Technology (FCT) under grant number SFRH/BD/131002/2017, co-funded by the Ministry of Science, Technology and Higher Education (MCTES), by the European Social Fund (FSE) through the ‘Programa Operacional Regional Centro’ (POR-Centro), and by the Human Capital Operational Programme (POCH)

Planetary film reconnaissance system

Design, fabrication, assembly of planetary film reconnaissance syste

LED bulbs technical specification and testing procedure for solar home systems

The definition of technical specifications and the corresponding laboratory procedures are necessary steps in order to assure the quality of the devices prior to be installed in Solar Home Systems (SHS). To clarify and unify criteria a European project supported the development of the Universal Technical Standard for Solar Home Systems (UTSfSHS). Its principles were to generate simple and affordable technical requirements to be optimized in order to facilitate the implementation of tests with basic and simple laboratory tools even on the same SHS electrification program countries. These requirements cover the main aspects of this type of installations and its lighting chapter was developed based on the most used technology at that time: fluorescent tubes and CFLs. However, with the consolidation of the new LED solid state lighting devices, particular attention is being given to this matter and new procedures are required. In this work we develop a complete set of technical specifications and test procedures that have been designed within the frame of the UTSfSHS, based on an intense review of the scientific and technical publications related to LED lighting and their practical application. They apply to lamp reliability, performance and safety under normal, extreme and abnormal operating conditions as a simple but complete quality meter tool for any LED bulb

Techniques to Improve LED Drivers by Reducing Voltage Stress and Energy Storage

High-brightness light-emitting diodes (HB LEDs) provide many advantages over other existing electric light sources, including high efficacy, long lifetime and small form factor. However, the overall lifetime of off-line LED applications is limited by the low-quality electrolytic capacitors utilized for energy storage. In order to use long-life capacitors while limiting cost increase, the required energy-storage capacitance should be reduced, which can be achieved with several techniques addressed in this thesis. The constant input current approach can achieve a power factor (PF) of 0.9, which meets ENERGY STAR requirements, while reducing required energy storage by one-third compared to unity-PF case. When ripple is allowed on the LED current, the trapezoidal LED current approach minimizes energy storage with small control effort. A second stage can significantly reduce required capacitance by allowing large voltage variation on the capacitor, while bidirectional structure helps limit additional power loss. The small form factor of LEDs offers flexibility for diverse and sophisticated design. In order to take this advantage, LED drivers should have a small size or thickness. Series-input structure provides a possibility to apply low-voltage components in high-voltage circuits, while the common duty cycle approach achieves automatic input voltage sharing and LED current copying, which can significantly simplify system design. With reduced rated voltage, integration of semiconductor devices becomes much easier and converters are able to operate at high switching frequencies with small components, both of which lead to high-level monolithic integration. All of the principles and control approaches are verified in experiments, with the results provided in this thesis

Assessing the Economic and Environmental Impacts associated with Current Street Lighting Technologies

Rising global energy demand and natural disasters continuously threaten energy supplies and prices. As a result, the U.S. government has mandated all government agencies to reduce energy consumption in order to minimize dependence on foreign energy supply and reduce costs. Concern over carbon emissions and environmental impacts has also been expressed in these mandates. One solution may be to invest in newer lighting technologies, such as light-emitting diode (LED) and electrodeless induction, in order to reduce the energy consumption, environmental impact, and costs required for both exterior roadway and parking lot lighting applications. This research compared these lighting technologies with high-pressure sodium (HPS) lighting technology at 56 Air Force installations to assess the economic and environmental consequences associated with each technology over the product life-cycle. This study utilized Building Life-Cycle Cost 5 and Economic Input-Output Life Cycle Assessment software packages to perform the analysis. Both the LED and electrodeless induction technologies showed moderate economic savings and less environmental impact when compared to HPS technology. The overall economic life-cycle costs for LED and induction lighting were 21% and 23% less, respectively, than HPS lighting. Environmental life-cycle assessment showed reductions of 55% and 45% for LED and induction technologies, respectively, compared to HPS lighting

The design of a hybrid DC/DC converter for LED lighting system using a single switch

A novel hybrid Luo-Cuk converter designed for LED lighting systems combines elements from both Luo and Cuk topologies. By integrating the input branch of both topologies, the converter, employing a single switch, can generate two distinct types of outputs simultaneously. One output follows a Luo-type, while the other adopts a Cuk-type . Through a series connection of the outputs from Luo and Cuk topologies, the voltage gain of the converter has been notably enhanced. The converter's output can be effectively regulated using a single controller. To validate the consistency between the topology's performance and theoretical analysis, simulation and prototype results have been provided