True random number generator based on the variability of the high resistance state of RRAMs

Hardware-based security primitives like True Random Number Generators (TRNG) have become a crucial part in protecting data over communication channels. With the growth of internet and cloud storage, TRNGs are required in numerous cryptographic operations. On the other hand, the inherently dense structure and low power characteristics of emerging nanoelectronic technologies such as resistive-switching memories (RRAM) make them suitable elements in designing hardware security modules integrated in CMOS ICs. In this paper, a memristor based TRNG is presented by leveraging the high stochasticity of RRAM resistance value in OFF (High Resistive) state. In the proposal, one or two devices can be used depending on whether the objective is focused on saving area or obtaining a higher random bit frequency generation. The generated bits, based on a combination of experimental measurements and SPICE simulations, passed all 15 National Institute of Standards and Technology (NIST) tests and achieved a throughput of tens of MHz.Postprint (published version

Stochastic Memory Devices for Security and Computing

With the widespread use of mobile computing and internet of things, secured communication and chip authentication have become extremely important. Hardware-based security concepts generally provide the best performance in terms of a good standard of security, low power consumption, and large-area density. In these concepts, the stochastic properties of nanoscale devices, such as the physical and geometrical variations of the process, are harnessed for true random number generators (TRNGs) and physical unclonable functions (PUFs). Emerging memory devices, such as resistive-switching memory (RRAM), phase-change memory (PCM), and spin-transfer torque magnetic memory (STT-MRAM), rely on a unique combination of physical mechanisms for transport and switching, thus appear to be an ideal source of entropy for TRNGs and PUFs. An overview of stochastic phenomena in memory devices and their use for developing security and computing primitives is provided. First, a broad classification of methods to generate true random numbers via the stochastic properties of nanoscale devices is presented. Then, practical implementations of stochastic TRNGs, such as hardware security and stochastic computing, are shown. Finally, future challenges to stochastic memory development are discussed

True random number generator based on RRAM-bias current starved ring oscillator

This work presents a RRAM-bias current starved ring oscillator (CSRO) as TRNG, where the cycle-to-cycle variability of a RRAM device is exploited as source of randomness. A simple voltage divider composed of this RRAM and a resistor is considered to bias the gate terminal of the extra transistor of every current starved (CS) inverter of the RO. In this way, the delay of the inverters is modified, deriving an unpredictable oscillation frequency every time the RRAM switches to the HRS. The oscillation frequency is finally leveraged to extract the sequence of random bits. The design is simple and add low area overhead. Experimental measurements are performed to analyze the cycle-to-cycle variability in the HRS. The very same measurements are subsequently used to validate the TRNG by means of electrical simulations. The obtained results passed all the NIST tests without the need for post-processing.This work was supported by the Spanish MCIN/AEI/10.13039/501100011033 under Project PID2019-103869RB-C33. The work of M. B. González was supported by the Ramón y Cajal under Grant RYC2020-030150-I.Peer ReviewedPostprint (published version

A PUF based Lightweight Hardware Security Architecture for IoT

With an increasing number of hand-held electronics, gadgets, and other smart devices, data is present in a large number of platforms, thereby increasing the risk of security, privacy, and safety breach than ever before. Due to the extreme lightweight nature of these devices, commonly referred to as IoT or `Internet of Things\u27, providing any kind of security is prohibitive due to high overhead associated with any traditional and mathematically robust cryptographic techniques. Therefore, researchers have searched for alternative intuitive solutions for such devices. Hardware security, unlike traditional cryptography, can provide unique device-specific security solutions with little overhead, address vulnerability in hardware and, therefore, are attractive in this domain. As Moore\u27s law is almost at its end, different emerging devices are being explored more by researchers as they present opportunities to build better application-specific devices along with their challenges compared to CMOS technology. In this work, we have proposed emerging nanotechnology-based hardware security as a security solution for resource constrained IoT domain. Specifically, we have built two hardware security primitives i.e. physical unclonable function (PUF) and true random number generator (TRNG) and used these components as part of a security protocol proposed in this work as well. Both PUF and TRNG are built from metal-oxide memristors, an emerging nanoscale device and are generally lightweight compared to their CMOS counterparts in terms of area, power, and delay. Design challenges associated with designing these hardware security primitives and with memristive devices are properly addressed. Finally, a complete security protocol is proposed where all of these different pieces come together to provide a practical, robust, and device-specific security for resource-limited IoT systems

GeSe-based Ovonic Threshold Switching Volatile True Random Number Generator

In this paper, we propose and demonstrate a novel technique for true random number generator (TRNG) application using GeSe-based Ovonic threshold switching (OTS) selector devices. The inherent variability in OTS threshold voltage results in a bimodal distribution of on/off states which can be easily converted into digital bits. The experimental evaluation shows that the proposed TRNG enables the generation of high-quality random bits that passed 12 tests in the National Institute of Standards and Technology statistical test suite without complex external circuits for post-processing. The randomness is further evidenced by the prediction rate of ∼50% using machine learning algorithm. Compared with the TRNGs based on non-volatile memories, the volatile nature of OTS avoids the reset operation, thus further simplifying the operation and improving the generation frequency

RRAM Based Random Bit Generation for Hardware Security Applications

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Resistive random access memories (RRAMs) have arisen as a competitive candidate for non-volatile memories due to their scalability, simple structure, fast switching speed and compatibility with conventional back-end processes. The stochastic switching mechanism and intrinsic variability of RRAMs still poses challenges that must be overcome prior to their massive memory commercialization. However, these very same features open a wide range of potential applications for these devices in hardware security. In this context, this work proposes the generation of a random bit by means of simultaneous write operation of two parallel cells so that only one of them unpredictably switches its state. Electrical simulations confirm the strong stochastic behavior and stability of the proposed primitive. Exploiting this fact, a Physical Unclonable Function (PUF) like primitive is implemented based on modified 1 transistor - 1 resistor (1T1R) array structure.Peer ReviewedPostprint (published version

Standards for the Characterization of Endurance in Resistive Switching Devices

Resistive switching (RS) devices are emerging electronic components that could have applications in multiple types of integrated circuits, including electronic memories, true random number generators, radiofrequency switches, neuromorphic vision sensors, and artificial neural networks. The main factor hindering the massive employment of RS devices in commercial circuits is related to variability and reliability issues, which are usually evaluated through switching endurance tests. However, we note that most studies that claimed high endurances >106 cycles were based on resistance versus cycle plots that contain very few data points (in many cases even <20), and which are collected in only one device. We recommend not to use such a characterization method because it is highly inaccurate and unreliable (i.e., it cannot reliably demonstrate that the device effectively switches in every cycle and it ignores cycle-to-cycle and device-to-device variability). This has created a blurry vision of the real performance of RS devices and in many cases has exaggerated their potential. This article proposes and describes a method for the correct characterization of switching endurance in RS devices; this method aims to construct endurance plots showing one data point per cycle and resistive state and combine data from multiple devices. Adopting this recommended method should result in more reliable literature in the field of RS technologies, which should accelerate their integration in commercial products

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

Semiconductor Memory Applications in Radiation Environment, Hardware Security and Machine Learning System

abstract: Semiconductor memory is a key component of the computing systems. Beyond the conventional memory and data storage applications, in this dissertation, both mainstream and eNVM memory technologies are explored for radiation environment, hardware security system and machine learning applications. In the radiation environment, e.g. aerospace, the memory devices face different energetic particles. The strike of these energetic particles can generate electron-hole pairs (directly or indirectly) as they pass through the semiconductor device, resulting in photo-induced current, and may change the memory state. First, the trend of radiation effects of the mainstream memory technologies with technology node scaling is reviewed. Then, single event effects of the oxide based resistive switching random memory (RRAM), one of eNVM technologies, is investigated from the circuit-level to the system level. Physical Unclonable Function (PUF) has been widely investigated as a promising hardware security primitive, which employs the inherent randomness in a physical system (e.g. the intrinsic semiconductor manufacturing variability). In the dissertation, two RRAM-based PUF implementations are proposed for cryptographic key generation (weak PUF) and device authentication (strong PUF), respectively. The performance of the RRAM PUFs are evaluated with experiment and simulation. The impact of non-ideal circuit effects on the performance of the PUFs is also investigated and optimization strategies are proposed to solve the non-ideal effects. Besides, the security resistance against modeling and machine learning attacks is analyzed as well. Deep neural networks (DNNs) have shown remarkable improvements in various intelligent applications such as image classification, speech classification and object localization and detection. Increasing efforts have been devoted to develop hardware accelerators. In this dissertation, two types of compute-in-memory (CIM) based hardware accelerator designs with SRAM and eNVM technologies are proposed for two binary neural networks, i.e. hybrid BNN (HBNN) and XNOR-BNN, respectively, which are explored for the hardware resource-limited platforms, e.g. edge devices.. These designs feature with high the throughput, scalability, low latency and high energy efficiency. Finally, we have successfully taped-out and validated the proposed designs with SRAM technology in TSMC 65 nm. Overall, this dissertation paves the paths for memory technologies’ new applications towards the secure and energy-efficient artificial intelligence system.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Flash Memory Devices

Flash memory devices have represented a breakthrough in storage since their inception in the mid-1980s, and innovation is still ongoing. The peculiarity of such technology is an inherent flexibility in terms of performance and integration density according to the architecture devised for integration. The NOR Flash technology is still the workhorse of many code storage applications in the embedded world, ranging from microcontrollers for automotive environment to IoT smart devices. Their usage is also forecasted to be fundamental in emerging AI edge scenario. On the contrary, when massive data storage is required, NAND Flash memories are necessary to have in a system. You can find NAND Flash in USB sticks, cards, but most of all in Solid-State Drives (SSDs). Since SSDs are extremely demanding in terms of storage capacity, they fueled a new wave of innovation, namely the 3D architecture. Today “3D” means that multiple layers of memory cells are manufactured within the same piece of silicon, easily reaching a terabit capacity. So far, Flash architectures have always been based on "floating gate," where the information is stored by injecting electrons in a piece of polysilicon surrounded by oxide. On the contrary, emerging concepts are based on "charge trap" cells. In summary, flash memory devices represent the largest landscape of storage devices, and we expect more advancements in the coming years. This will require a lot of innovation in process technology, materials, circuit design, flash management algorithms, Error Correction Code and, finally, system co-design for new applications such as AI and security enforcement