Time and frequency domain algorithms for speech coding

The promise of digital hardware economies (due to recent advances in VLSI technology), has focussed much attention on more complex and sophisticated speech coding algorithms which offer improved quality at relatively low bit rates. This thesis describes the results (obtained from computer simulations) of research into various efficient (time and frequency domain) speech encoders operating at a transmission bit rate of 16 Kbps. In the time domain, Adaptive Differential Pulse Code Modulation (ADPCM) systems employing both forward and backward adaptive prediction were examined. A number of algorithms were proposed and evaluated, including several variants of the Stochastic Approximation Predictor (SAP). A Backward Block Adaptive (BBA) predictor was also developed and found to outperform the conventional stochastic methods, even though its complexity in terms of signal processing requirements is lower. A simplified Adaptive Predictive Coder (APC) employing a single tap pitch predictor considered next provided a slight improvement in performance over ADPCM, but with rather greater complexity. The ultimate test of any speech coding system is the perceptual performance of the received speech. Recent research has indicated that this may be enhanced by suitable control of the noise spectrum according to the theory of auditory masking. Various noise shaping ADPCM configurations were examined, and it was demonstrated that a proposed pre-/post-filtering arrangement which exploits advantageously the predictor-quantizer interaction, leads to the best subjective performance in both forward and backward prediction systems. Adaptive quantization is instrumental to the performance of ADPCM systems. Both the forward adaptive quantizer (AQF) and the backward oneword memory adaptation (AQJ) were examined. In addition, a novel method of decreasing quantization noise in ADPCM-AQJ coders, which involves the application of correction to the decoded speech samples, provided reduced output noise across the spectrum, with considerable high frequency noise suppression. More powerful (and inevitably more complex) frequency domain speech coders such as the Adaptive Transform Coder (ATC) and the Sub-band Coder (SBC) offer good quality speech at 16 Kbps. To reduce complexity and coding delay, whilst retaining the advantage of sub-band coding, a novel transform based split-band coder (TSBC) was developed and found to compare closely in performance with the SBC. To prevent the heavy side information requirement associated with a large number of bands in split-band coding schemes from impairing coding accuracy, without forgoing the efficiency provided by adaptive bit allocation, a method employing AQJs to code the sub-band signals together with vector quantization of the bit allocation patterns was also proposed. Finally, 'pipeline' methods of bit allocation and step size estimation (using the Fast Fourier Transform (FFT) on the input signal) were examined. Such methods, although less accurate, are nevertheless useful in limiting coding delay associated with SRC schemes employing Quadrature Mirror Filters (QMF)

Advanced signal processing techniques for pitch synchronous sinusoidal speech coders

Recent trends in commercial and consumer demand have led to the increasing use of multimedia applications in mobile and Internet telephony. Although audio, video and data communications are becoming more prevalent, a major application is and will remain the transmission of speech. Speech coding techniques suited to these new trends must be developed, not only to provide high quality speech communication but also to minimise the required bandwidth for speech, so as to maximise that available for the new audio, video and data services. The majority of current speech coders employed in mobile and Internet applications employ a Code Excited Linear Prediction (CELP) model. These coders attempt to reproduce the input speech signal and can produce high quality synthetic speech at bit rates above 8 kbps. Sinusoidal speech coders tend to dominate at rates below 6 kbps but due to limitations in the sinusoidal speech coding model, their synthetic speech quality cannot be significantly improved even if their bit rate is increased. Recent developments have seen the emergence and application of Pitch Synchronous (PS) speech coding techniques to these coders in order to remove the limitations of the sinusoidal speech coding model. The aim of the research presented in this thesis is to investigate and eliminate the factors that limit the quality of the synthetic speech produced by PS sinusoidal coders. In order to achieve this innovative signal processing techniques have been developed. New parameter analysis and quantisation techniques have been produced which overcome many of the problems associated with applying PS techniques to sinusoidal coders. In sinusoidal based coders, two of the most important elements are the correct formulation of pitch and voicing values from the' input speech. The techniques introduced here have greatly improved these calculations resulting in a higher quality PS sinusoidal speech coder than was previously available. A new quantisation method which is able to reduce the distortion from quantising speech spectral information has also been developed. When these new techniques are utilised they effectively raise the synthetic speech quality of sinusoidal coders to a level comparable to that produced by CELP based schemes, making PS sinusoidal coders a promising alternative at low to medium bit rates.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Frequency-warped autoregressive modeling and filtering

This thesis consists of an introduction and nine articles. The articles are related to the application of frequency-warping techniques to audio signal processing, and in particular, predictive coding of wideband audio signals. The introduction reviews the literature and summarizes the results of the articles. Frequency-warping, or simply warping techniques are based on a modification of a conventional signal processing system so that the inherent frequency representation in the system is changed. It is demonstrated that this may be done for basically all traditional signal processing algorithms. In audio applications it is beneficial to modify the system so that the new frequency representation is close to that of human hearing. One of the articles is a tutorial paper on the use of warping techniques in audio applications. Majority of the articles studies warped linear prediction, WLP, and its use in wideband audio coding. It is proposed that warped linear prediction would be particularly attractive method for low-delay wideband audio coding. Warping techniques are also applied to various modifications of classical linear predictive coding techniques. This was made possible partly by the introduction of a class of new implementation techniques for recursive filters in one of the articles. The proposed implementation algorithm for recursive filters having delay-free loops is a generic technique. This inspired to write an article which introduces a generalized warped linear predictive coding scheme. One example of the generalized approach is a linear predictive algorithm using almost logarithmic frequency representation.reviewe

A Hybrid voice/text electronic mail system: an application of the integrated services digital network

The objective of this thesis is to present a useful application for the Integrated Services Digital Network (ISDN) that is expected to one day replace the analog phone system in use today. ISDN itself and its continuing evolution are detailed. The system developed as a part of this thesis involved the creation of an inexpensive phone terminal that can serve as an ISDN terminal and also as a bridge to a Local Area Network (LAN). The phone terminal provides a hybrid electronic mail system that allows the attachment of speech to text within a message. Messages created with this phone terminal could theoretically be sent locally using the LAN interface and globally using ISDN to other users with either phone terminals or multimedia personal computers. For this project, the two phone terminals created were interconnected via an Ethernet and using an 80486 PC to act as a Central Office System. This Central Office System provides speech/message storage for the phone terminals. It makes use of speech compression techniques to minimize the storage requirements. The speech compression techniques used as well as the field of speech coding in general are discussed

Proceedings of the Mobile Satellite Conference

A satellite-based mobile communications system provides voice and data communications to mobile users over a vast geographic area. The technical and service characteristics of mobile satellite systems (MSSs) are presented and form an in-depth view of the current MSS status at the system and subsystem levels. Major emphasis is placed on developments, current and future, in the following critical MSS technology areas: vehicle antennas, networking, modulation and coding, speech compression, channel characterization, space segment technology and MSS experiments. Also, the mobile satellite communications needs of government agencies are addressed, as is the MSS potential to fulfill them

Assessing the quality of audio and video components in desktop multimedia conferencing

This thesis seeks to address the HCI (Human-Computer Interaction) research problem of how to establish the level of audio and video quality that end users require to successfully perform tasks via networked desktop videoconferencing. There are currently no established HCI methods of assessing the perceived quality of audio and video delivered in desktop videoconferencing. The transport of real-time speech and video information across new digital networks causes novel and different degradations, problems and issues to those common in the traditional telecommunications areas (telephone and television). Traditional assessment methods involve the use of very short test samples, are traditionally conducted outside a task-based environment, and focus on whether a degradation is noticed or not. But these methods cannot help establish what audio-visual quality is required by users to perform tasks successfully with the minimum of user cost, in interactive conferencing environments. This thesis addresses this research gap by investigating and developing a battery of assessment methods for networked videoconferencing, suitable for use in both field trials and laboratory-based studies. The development and use of these new methods helps identify the most critical variables (and levels of these variables) that affect perceived quality, and means by which network designers and HCI practitioners can address these problems are suggested. The output of the thesis therefore contributes both methodological (i.e. new rating scales and data-gathering methods) and substantive (i.e. explicit knowledge about quality requirements for certain tasks) knowledge to the HCI and networking research communities on the subjective quality requirements of real-time interaction in networked videoconferencing environments. Exploratory research is carried out through an interleaved series of field trials and controlled studies, advancing substantive and methodological knowledge in an incremental fashion. Initial studies use the ITU-recommended assessment methods, but these are found to be unsuitable for assessing networked speech and video quality for a number of reasons. Therefore later studies investigate and establish a novel polar rating scale, which can be used both as a static rating scale and as a dynamic continuous slider. These and further developments of the methods in future lab- based and real conferencing environments will enable subjective quality requirements and guidelines for different videoconferencing tasks to be established