Enhanced receding horizon optimal performance for online tuning of PID controller parameters

In this paper, a new online proportional-integral-derivative (PID) controller parameter optimisation method is proposed by incorporating the philosophy of the model predictive control (MPC) algorithm. The future system predictive output and control sequence are first written as a function of the controller parameters. Then PID controller design is realised through optimising the cost function under the constraints on the system input and output. The MPC based PID online tuning easily handles the constraints and time delay. Simulation results in three situations, changing the control weight, adding constraints on the overshoot and control signal and changing the reference value, confirm that the proposed method is capable of producing good tracking performance with low energy consumption and short settling time

Analysis and Application of Advanced Control Strategies to a Heating Element Nonlinear Model

open4siSustainable control has begun to stimulate research and development in a wide range of industrial communities particularly for systems that demand a high degree of reliability and availability (sustainability) and at the same time characterised by expensive and/or safety critical maintenance work. For heating systems such as HVAC plants, clear conflict exists between ensuring a high degree of availability and reducing costly maintenance times. HVAC systems have highly non-linear dynamics and a stochastic and uncontrollable driving force as input in the form of intake air speed, presenting an interesting challenge for modern control methods. Suitable control methods can provide sustainable maximisation of energy conversion efficiency over wider than normally expected air speeds and temperatures, whilst also giving a degree of “tolerance” to certain faults, providing an important impact on maintenance scheduling, e.g. by capturing the effects of some system faults before they become serious.This paper presents the design of different control strategies applied to a heating element nonlinear model. The description of this heating element was obtained exploiting a data driven and physically meaningful nonlinear continuous time model, which represents a test bed used in passive air conditioning for sustainable housing applications. This model has low complexity while achieving high simulation performance. The physical meaningfulness of the model provides an enhanced insight into the performance and functionality of the system. In return, this information can be used during the system simulation and improved model based and data driven control designs for tight temperature regulation. The main purpose of this study is thus to give several examples of viable and practical designs of control schemes with application to this heating element model. Moreover, extensive simulations and Monte Carlo analysis are the tools for assessing experimentally the main features of the proposed control schemes, in the presence of modelling and measurement errors. These developed control methods are also compared in order to evaluate advantages and drawbacks of the considered solutions. Finally, the exploited simulation tools can serve to highlight the potential application of the proposed control strategies to real air conditioning systems.openTurhan, T.; Simani, S.; Zajic, I.; Gokcen Akkurt, G.Turhan, T.; Simani, Silvio; Zajic, I.; Gokcen Akkurt, G

Adaptive neural network cascade control system with entropy-based design

A neural network (NN) based cascade control system is developed, in which the primary PID controller is constructed by NN. A new entropy-based measure, named the centred error entropy (CEE) index, which is a weighted combination of the error cross correntropy (ECC) criterion and the error entropy criterion (EEC), is proposed to tune the NN-PID controller. The purpose of introducing CEE in controller design is to ensure that the uncertainty in the tracking error is minimised and also the peak value of the error probability density function (PDF) being controlled towards zero. The NN-controller design based on this new performance function is developed and the convergent conditions are. During the control process, the CEE index is estimated by a Gaussian kernel function. Adaptive rules are developed to update the kernel size in order to achieve more accurate estimation of the CEE index. This NN cascade control approach is applied to superheated steam temperature control of a simulated power plant system, from which the effectiveness and strength of the proposed strategy are discussed by comparison with NN-PID controllers tuned with EEC and ECC criterions

Optimized adaptive MPC for lateral control of autonomous vehicles

© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksAutonomous vehicles are the upcoming solution to most transportation problems such as safety, comfort and efficiency. The steering control is one of the main important tasks in achieving autonomous driving. Model predictive control (MPC) is among the fittest controllers for this task due to its optimal performance and ability to handle constraints. This paper proposes an adaptive MPC controller (AMPC) for the path tracking task, and an improved PSO algorithm for optimising the AMPC parameters. Parameter adaption is realised online using a lookup table approach. The propose AMPC performance is assessed and compared with the classic MPC and the Pure Pursuit controller through simulationsPeer ReviewedPostprint (author's final draft

Nonlinear predictive restricted structure control

This thesis defines new developments in predictive restricted structure control for industrial applications. It begins by describing the augmented system for both state-space and polynomial model descriptions. These descriptions can contain the plant model, the disturbance model, and any additional essential model subsystems. It then describes the predictive restricted structure control solution for both linear and nonlinear systems in state-space form. The solution utilizes the recent development in nonlinear predictive generalized minimum variance by adding a general operator subsystem that defines nonlinear system along with the linear or the linear parameter varying output subsystem. The next contribution is the polynomial predictive restricted structure control algorithm for polynomial linear parameter varying model that may result from nonlinear equations or experimental data-driven model identification. This algorithm utilizes the generalised predictive control method to approximate and control nonlinear systems in the linear parameter varying system inputoutput transfer operator matrices. The solution is simple in unconstrained and constrained optimization solutions and required a small computing capacity. Four examples have been chosen to test the algorithms for different nonlinear characteristics. In the first three examples, state-space versions of the algorithm for the linear, the quasi-linear parameter varying and the state-dependent were employed to control the quadruple tank process, electronic throttle body, and the continuous stirred tank reactors. In the last example, the polynomial linear parameter varying restricted structure controller is used to control automotive variable camshaft timing system.This thesis defines new developments in predictive restricted structure control for industrial applications. It begins by describing the augmented system for both state-space and polynomial model descriptions. These descriptions can contain the plant model, the disturbance model, and any additional essential model subsystems. It then describes the predictive restricted structure control solution for both linear and nonlinear systems in state-space form. The solution utilizes the recent development in nonlinear predictive generalized minimum variance by adding a general operator subsystem that defines nonlinear system along with the linear or the linear parameter varying output subsystem. The next contribution is the polynomial predictive restricted structure control algorithm for polynomial linear parameter varying model that may result from nonlinear equations or experimental data-driven model identification. This algorithm utilizes the generalised predictive control method to approximate and control nonlinear systems in the linear parameter varying system inputoutput transfer operator matrices. The solution is simple in unconstrained and constrained optimization solutions and required a small computing capacity. Four examples have been chosen to test the algorithms for different nonlinear characteristics. In the first three examples, state-space versions of the algorithm for the linear, the quasi-linear parameter varying and the state-dependent were employed to control the quadruple tank process, electronic throttle body, and the continuous stirred tank reactors. In the last example, the polynomial linear parameter varying restricted structure controller is used to control automotive variable camshaft timing system

Review of dynamic positioning control in maritime microgrid systems

For many offshore activities, including offshore oil and gas exploration and offshore wind farm construction, it is essential to keep the position and heading of the vessel stable. The dynamic positioning system is a progressive technology, which is extensively used in shipping and other maritime structures. To maintain the vessels or platforms from displacement, its thrusters are used automatically to control and stabilize the position and heading of vessels in sea state disturbances. The theory of dynamic positioning has been studied and developed in terms of control techniques to achieve greater accuracy and reduce ship movement caused by environmental disturbance for more than 30 years. This paper reviews the control strategies and architecture of the DPS in marine vessels. In addition, it suggests possible control principles and makes a comparison between the advantages and disadvantages of existing literature. Some details for future research on DP control challenges are discussed in this paper

Modified Predictive Control for a Class of Electro-Hydraulic Actuator

Many model predictive control (MPC) algorithms have been proposed in the literature depending on the conditionality of the system matrix and the tuning control parameters. A modified predictive control method is proposed in this paper. The modified predictive method is based on the control matrix formulation combined with optimized move suppression coefficient. Poor dynamics and high nonlinearities are parts of the difficulties in the control of the Electro-Hydraulic Actuator (EHA) functions, which make the proposed matrix an attractive solution. The developed controller is designed based on simulation model of a position control EHA to reduce the overshoot of the system and to achieve better and smoother tracking. The performance of the designed controller achieved quick response and accurate behavior of the tracking compared to the previous study

A metaheuristic particle swarm optimization approach to nonlinear model predictive control

This paper commences with a short review on optimal control for nonlinear systems, emphasizing the Model Predictive approach for this purpose. It then describes the Particle Swarm Optimization algorithm and how it could be applied to nonlinear Model Predictive Control. On the basis of these principles, two novel control approaches are proposed and anal- ysed. One is based on optimization of a numerically linearized perturbation model, whilst the other avoids the linearization step altogether. The controllers are evaluated by simulation of an inverted pendulum on a cart system. The results are compared with a numerical linearization technique exploiting conventional convex optimization methods instead of Particle Swarm Opti- mization. In both approaches, the proposed Swarm Optimization controllers exhibit superior performance. The methodology is then extended to input constrained nonlinear systems, offering a promising new paradigm for nonlinear optimal control design.peer-reviewe

Model Predictive Control System Design of a passenger car for Valet Parking Scenario

A recent expansion of passenger cars’ automated functions has led to increasingly challenging design problems for the engineers. Among this the development of Automated Valet Parking is the latest addition. The system represents the next evolution of automated system giving the vehicle greater autonomy: the efforts of most automotive OEMs go towards achieving market deployment of such automated function. To this end the focus of each OEM is on taking part to this competitive endeavor and succeed by developing a proprietary solution with the support of hardware and software suppliers. Within this framework the present work aims at developing an effective control strategy for the considered scenarios. In order to reach this goal a Model Predictive Control approach is employed taking advantage of previous works within the automotive OEM in the automated driving field. The control algorithm is developed in a Simulink® simulation according to the requirements of the application and tested; results show the control strategy successfully drives the vehicle on the predefined path