Dynamic Power Management for Reactive Stream Processing on the SCC Tiled Architecture

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License(http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.Dynamic voltage and frequency scaling} (DVFS) is a means to adjust the computing capacity and power consumption of computing systems to the application demands. DVFS is generally useful to provide a compromise between computing demands and power consumption, especially in the areas of resource-constrained computing systems. Many modern processors support some form of DVFS. In this article we focus on the development of an execution framework that provides light-weight DVFS support for reactive stream-processing systems (RSPS). RSPS are a common form of embedded control systems, operating in direct response to inputs from their environment. At the execution framework we focus on support for many-core scheduling for parallel execution of concurrent programs. We provide a DVFS strategy for RSPS that is simple and lightweight, to be used for dynamic adaptation of the power consumption at runtime. The simplicity of the DVFS strategy became possible by sole focus on the application domain of RSPS. The presented DVFS strategy does not require specific assumptions about the message arrival rate or the underlying scheduling method. While DVFS is a very active field, in contrast to most existing research, our approach works also for platforms like many-core processors, where the power settings typically cannot be controlled individually for each computational unit. We also support dynamic scheduling with variable workload. While many research results are provided with simulators, in our approach we present a parallel execution framework with experiments conducted on real hardware, using the SCC many-core processor. The results of our experimental evaluation confirm that our simple DVFS strategy provides potential for significant energy saving on RSPS.Peer reviewe

Mapping parallelism to heterogeneous processors

Most embedded devices are based on heterogeneous Multiprocessor System on Chips (MPSoCs). These contain a variety of processors like CPUs, micro-controllers, DSPs, GPUs and specialised accelerators. The heterogeneity of these systems helps in achieving good performance and energy efficiency but makes programming inherently difficult. There is no single programming language or runtime to program such platforms. This thesis makes three contributions to these problems. First, it presents a framework that allows code in Single Program Multiple Data (SPMD) form to be mapped to a heterogeneous platform. The mapping space is explored, and it is shown that the best mapping depends on the metric used. Next, a compiler framework is presented which bridges the gap between the high -level programming model of OpenMP and the heterogeneous resources of MPSoCs. It takes OpenMP programs and generates code which runs on all processors. It delivers programming ease while exploiting heterogeneous resources. Finally, a compiler-based approach to runtime power management for heterogeneous cores is presented. Given an externally provided budget, the approach generates heterogeneous, partitioned code that attempts to give the best performance within that budget

Adaptive Knobs for Resource Efficient Computing

Performance demands of emerging domains such as artificial intelligence, machine learning and vision, Internet-of-things etc., continue to grow. Meeting such requirements on modern multi/many core systems with higher power densities, fixed power and energy budgets, and thermal constraints exacerbates the run-time management challenge. This leaves an open problem on extracting the required performance within the power and energy limits, while also ensuring thermal safety. Existing architectural solutions including asymmetric and heterogeneous cores and custom acceleration improve performance-per-watt in specific design time and static scenarios. However, satisfying applications’ performance requirements under dynamic and unknown workload scenarios subject to varying system dynamics of power, temperature and energy requires intelligent run-time management. Adaptive strategies are necessary for maximizing resource efficiency, considering i) diverse requirements and characteristics of concurrent applications, ii) dynamic workload variation, iii) core-level heterogeneity and iv) power, thermal and energy constraints. This dissertation proposes such adaptive techniques for efficient run-time resource management to maximize performance within fixed budgets under unknown and dynamic workload scenarios. Resource management strategies proposed in this dissertation comprehensively consider application and workload characteristics and variable effect of power actuation on performance for pro-active and appropriate allocation decisions. Specific contributions include i) run-time mapping approach to improve power budgets for higher throughput, ii) thermal aware performance boosting for efficient utilization of power budget and higher performance, iii) approximation as a run-time knob exploiting accuracy performance trade-offs for maximizing performance under power caps at minimal loss of accuracy and iv) co-ordinated approximation for heterogeneous systems through joint actuation of dynamic approximation and power knobs for performance guarantees with minimal power consumption. The approaches presented in this dissertation focus on adapting existing mapping techniques, performance boosting strategies, software and dynamic approximations to meet the performance requirements, simultaneously considering system constraints. The proposed strategies are compared against relevant state-of-the-art run-time management frameworks to qualitatively evaluate their efficacy

Runtime Management of Multiprocessor Systems for Fault Tolerance, Energy Efficiency and Load Balancing

Efficiency of modern multiprocessor systems is hurt by unpredictable events: aging causes permanent faults that disable components; application spawnings and terminations taking place at arbitrary times, affect energy proportionality, causing energy waste; load imbalances reduce resource utilization, penalizing performance. This thesis demonstrates how runtime management can mitigate the negative effects of unpredictable events, making decisions guided by a combination of static information known in advance and parameters that only become known at runtime. We propose techniques for three different objectives: graceful degradation of aging-prone systems; energy efficiency of heterogeneous adaptive systems; and load balancing by means of work stealing. Managing aging-prone systems for graceful efficiency degradation, is based on a high-level system description that encapsulates hardware reconfigurability and workload flexibility and allows to quantify system efficiency and use it as an objective function. Different custom heuristics, as well as simulated annealing and a genetic algorithm are proposed to optimize this objective function as a response to component failures. Custom heuristics are one to two orders of magnitude faster, provide better efficiency for the first 20% of system lifetime and are less than 13% worse than a genetic algorithm at the end of this lifetime. Custom heuristics occasionally fail to satisfy reconfiguration cost constraints. As all algorithms\u27 execution time scales well with respect to system size, a genetic algorithm can be used as backup in these cases. Managing heterogeneous multiprocessors capable of Dynamic Voltage and Frequency Scaling is based on a model that accurately predicts performance and power: performance is predicted by combining static, application-specific profiling information and dynamic, runtime performance monitoring data; power is predicted using the aforementioned performance estimations and a set of platform-specific, static parameters, determined only once and used for every application mix. Three runtime heuristics are proposed, that make use of this model to perform partial search of the configuration space, evaluating a small set of configurations and selecting the best one. When best-effort performance is adequate, the proposed approach achieves 3% higher energy efficiency compared to the powersave governor and 2x better compared to the interactive and ondemand governors. When individual applications\u27 performance requirements are considered, the proposed approach is able to satisfy them, giving away 18% of system\u27s energy efficiency compared to the powersave, which however misses the performance targets by 23%; at the same time, the proposed approach maintains an efficiency advantage of about 55% compared to the other governors, which also satisfy the requirements. Lastly, to improve load balancing of multiprocessors, a partial and approximate view of the current load distribution among system cores is proposed, which consists of lightweight data structures and is maintained by each core through cheap operations. A runtime algorithm is developed, using this view whenever a core becomes idle, to perform victim core selection for work stealing, also considering system topology and memory hierarchy. Among 12 diverse imbalanced workloads, the proposed approach achieves better performance than random, hierarchical and local stealing for six workloads. Furthermore, it is at most 8% slower among the other six workloads, while competing strategies incur a penalty of at least 89% on some workload

3rd Many-core Applications Research Community (MARC) Symposium. (KIT Scientific Reports ; 7598)

This manuscript includes recent scientific work regarding the Intel Single Chip Cloud computer and describes approaches for novel approaches for programming and run-time organization

Design Space Exploration and Resource Management of Multi/Many-Core Systems

The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends

Thermal Management for Dependable On-Chip Systems

This thesis addresses the dependability issues in on-chip systems from a thermal perspective. This includes an explanation and analysis of models to show the relationship between dependability and tempature. Additionally, multiple novel methods for on-chip thermal management are introduced aiming to optimize thermal properties. Analysis of the methods is done through simulation and through infrared thermal camera measurements