Virtual Timing Isolation for Mixed-Criticality Systems

Commercial of the shelf multicore processors suffer from timing interferences between cores which complicates applying them in hard real-time systems like avionic applications. This paper proposes a virtual timing isolation of one main application running on one core from all other cores. The proposed technique is based on hardware external to the multicore processor and completely transparent to the main application i.e., no modifications of the software including the operating system are necessary. The basic idea is to apply a single-core execution based Worst Case Execution Time analysis and to accept a predefined slowdown during multicore execution. If the slowdown exceeds the acceptable bounds, interferences will be reduced by controlling the behavior of low-critical cores to keep the main application\u27s progress inside the given bounds. Apart from the main goal of isolating the timing of the critical application a subgoal is also to efficiently use the other cores. For that purpose, three different mechanisms for controlling the non-critical cores are compared regarding efficient usage of the complete processor. Measuring the progress of the main application is performed by tracking the application\u27s Fingerprint. This technology quantifies online any slowdown of execution compared to a given baseline (single-core execution). Several countermeasures to compensate unacceptable slowdowns are proposed and evaluated in this paper, together with an accuracy evaluation of the Fingerprinting. Our evaluations using the TACLeBench benchmark suite show that we can meet a given acceptable timing bound of 4 percent slowdown with a resulting real slowdown of only 3.27 percent in case of a pulse width modulated control and of 4.44 percent in the case of a frequency scaling control

The COMPLEX reference framework for HW/SW co-design and power management supporting platform-based design-space exploration

n/

Optimized scheduling of periodic hard real-time multicore systems

[EN] Multicore systems were developed to provide a substantial performance increase over mono-core systems. But shared hardware resources are a problem as they add unpredictable delays that affect the schedulability of multicore hard real-time systems. In recent years much effort has been put into modelling interference and proposing scheduling techniques to mitigate its negative effect. Using one of these models, we propose a scheduling technique, based on Integer Linear Programming (ILP) that, in combination with a task to core allocator, not only achieves a feasible schedule but also reduces the interference produced by shared hardware resources in the context of hard real-time multicore systems. The evaluation shows how interference is reduced (approximate to 83.47%) and schedulability is increased (approximate to 12.25%) compared to traditional heuristics.This work was supported in part by Ministerio de Ciencia e Innovacion (MCIN)/Agencia Estatal de Investigacion (AEI)/10.13039/501100011033 under Grant PLEC2021-007609, in part by the European Union NextGeneration EU/Plan de Recuperacion, Transformaciony Resiliencia (PRTR) [MOBILITY IN THE CITY OF THE FUTURE. PREPARING CITIES FOR THE NEW 2030 MOBILITYTHROUGH THE 4 SPANISH POLYTECHNIC UNIVERSITIES (METROPOLIS)], and in part by MCIN/AEI/10.13039/501100011033/[Modelos y plataformas para sistema informaticos industriales predecibles, seguros y confiables (PRESECREL)] under Grant PID2021124502OB-C41.Aceituno-Peinado, JM.; Guasque Ortega, A.; Balbastre, P.; Blanes Noguera, F.; Pomante, L. (2023). Optimized scheduling of periodic hard real-time multicore systems. IEEE Access. 11:30027-30039. https://doi.org/10.1109/ACCESS.2023.326113030027300391

Application specific instruction set processor design for embedded application using the coware tool

An Application Specific Instruction Set Processor (ASIP) is widely used as a System on a Chip(SoC) Component. ASIPs possess an instruction set which is tai-lored to benefit a specific application. Such specialization allows ASIPs to serve as an intermediate between two dominant processor design styles- ASICs which has high processing abilities at the cost of limited programmability and Programmable solu-tions such as FPGAs that provide programming exibility at the cost of less energy eficiency. In this dissertation the goal is to design ASIP, keeping in mind a temper-ature sensor system. The platform used for processor design is LISA 2.0 description language and processor designing environment from CoWare. Coware processor de-signer allows processor architecture to be defined at an abstract level and automatic generation of chain of software tools like assembler, linker and simulator for functional verification followed by RTL level description. RTL level description is used to gen-erate synthesized report of the design using RTL compiler and finally the layout is created using Cadence encounter

Caracterización y optimización térmica de sistemas en chip mediante emulación con FPGAs

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadores y Automática, leída el 15/06/2012Tablets and smartphones are some of the many intelligent devices that dominate the consumer electronics market. These systems are complex to design as they must execute multiple applications (e.g.: real-time video processing, 3D games, or wireless communications), while meeting additional design constraints, such as low energy consumption, reduced implementation size and, of course, a short time-to-market. Internally, they rely on Multi-processor Systems on Chip (MPSoCs) as their main processing cores, to meet the tight design constraints: performance, size, power consumption, etc. In a bad design, the high logic density may generate hotspots that compromise the chip reliability. This thesis introduces a FPGA-based emulation framework for easy exploration of SoC design alternatives. It provides fast and accurate estimations of performance, power, temperature, and reliability in one unified flow, to help designers tune their system architecture before going to silicon.El estado del arte, en lo que a diseño de chips para empotrados se refiere, se encuentra dominado por los multi-procesadores en chip, o MPSoCs. Son complejos de diseñar y presentan problemas de disipación de potencia, de temperatura, y de fiabilidad. En este contexto, esta tesis propone una nueva plataforma de emulación para facilitar la exploración del enorme espacio de diseño. La plataforma utiliza una FPGA de propósito general para acelerar la emulación, lo cual le da una ventaja competitiva frente a los simuladores arquitectónicos software, que son mucho más lentos. Los datos obtenidos de la ejecución en la FPGA son enviados a un PC que contiene bibliotecas (modelos) SW para calcular el comportamiento (e.g.: la temperatura, el rendimiento, etc...) que tendría el chip final. La parte experimental está enfocada a dos puntos: por un lado, a verificar que el sistema funciona correctamente y, por otro, a demostrar la utilidad del entorno para realizar exploraciones que muestren los efectos a largo plazo que suceden dentro del chip, como puede ser la evolución de la temperatura, que es un fenómeno lento que normalmente requiere de costosas simulaciones software.Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

On a Software-Defined CAN Controller for Embedded Systems

Controller Area Network (CAN) technology is nowadays ubiquitous in vehicular applications and is also gaining popularity in other contexts, for instance, embedded and industrial automation systems. The recent standardization of CAN with flexible data rate (CAN FD), as well as other academic proposals, have highlighted the usefulness of enhancing the CAN physical and data link layers to attain better performance and other features. This paper describes a portable software-defined CAN controller called SDCC. Besides being handy as a research tool for experimenting with novel protocol concepts at the data link layer, SDCC is also fully capable of real-time execution. Hence, it can interact with real-world CAN devices through a physical bus interface

KAVUAKA: a low-power application-specific processor architecture for digital hearing aids

The power consumption of digital hearing aids is very restricted due to their small physical size and the available hardware resources for signal processing are limited. However, there is a demand for more processing performance to make future hearing aids more useful and smarter. Future hearing aids should be able to detect, localize, and recognize target speakers in complex acoustic environments to further improve the speech intelligibility of the individual hearing aid user. Computationally intensive algorithms are required for this task. To maintain acceptable battery life, the hearing aid processing architecture must be highly optimized for extremely low-power consumption and high processing performance.The integration of application-specific instruction-set processors (ASIPs) into hearing aids enables a wide range of architectural customizations to meet the stringent power consumption and performance requirements. In this thesis, the application-specific hearing aid processor KAVUAKA is presented, which is customized and optimized with state-of-the-art hearing aid algorithms such as speaker localization, noise reduction, beamforming algorithms, and speech recognition. Specialized and application-specific instructions are designed and added to the baseline instruction set architecture (ISA). Among the major contributions are a multiply-accumulate (MAC) unit for real- and complex-valued numbers, architectures for power reduction during register accesses, co-processors and a low-latency audio interface. With the proposed MAC architecture, the KAVUAKA processor requires 16 % less cycles for the computation of a 128-point fast Fourier transform (FFT) compared to related programmable digital signal processors. The power consumption during register file accesses is decreased by 6 %to 17 % with isolation and by-pass techniques. The hardware-induced audio latency is 34 %lower compared to related audio interfaces for frame size of 64 samples.The final hearing aid system-on-chip (SoC) with four KAVUAKA processor cores and ten co-processors is integrated as an application-specific integrated circuit (ASIC) using a 40 nm low-power technology. The die size is 3.6 mm2. Each of the processors and co-processors contains individual customizations and hardware features with a varying datapath width between 24-bit to 64-bit. The core area of the 64-bit processor configuration is 0.134 mm2. The processors are organized in two clusters that share memory, an audio interface, co-processors and serial interfaces. The average power consumption at a clock speed of 10 MHz is 2.4 mW for SoC and 0.6 mW for the 64-bit processor.Case studies with four reference hearing aid algorithms are used to present and evaluate the proposed hardware architectures and optimizations. The program code for each processor and co-processor is generated and optimized with evolutionary algorithms for operation merging,instruction scheduling and register allocation. The KAVUAKA processor architecture is com-pared to related processor architectures in terms of processing performance, average power consumption, and silicon area requirements

A thread synchronization model for the PREEMPT_RT Linux kernel

This article proposes an automata-based model for describing and validating sequences of kernel events in Linux PREEMPT_RT and how they influence the timeline of threads’ execution, comprising preemption control, interrupt handling and control, scheduling and locking. This article also presents an extension of the Linux tracing framework that enables the tracing of kernel events to verify the consistency of the kernel execution compared to the event sequences that are legal according to the formal model. This enables cross-checking of a kernel behavior against the formalized one, and in case of inconsistency, it pinpoints possible areas of improvement of the kernel, useful for regression testing. Indeed, we describe in details three problems in the kernel revealed by using the proposed technique, along with a short summary on how we reported and proposed fixes to the Linux kernel community. As an example of the usage of the model, the analysis of the events involved in the activation of the highest priority thread is presented, describing the delays occurred in this operation in the same granularity used by kernel developers. This illustrates how it is possible to take advantage of the model for analyzing the preemption model of Linux