147 research outputs found
Recommended from our members
Electromigration modeling and layout optimization for advanced VLSI
textElectromigration (EM) is a critical problem for interconnect reliability in advanced VLSI design. Because EM is a strong function of current density, a smaller cross-sectional area of interconnects can degrade the EM-related lifetime of IC, which is expected to become more severe in future technology nodes. Moreover, as EM is governed by various factors such as temperature, material property, geometrical shape, and mechanical stress, different interconnect structures can have distinct EM issues and solutions to mitigate them. For example, one of the most prominent technologies, die stacking technology of three-dimensional (3D) ICs, can have different EM problems from that of planer ICs, due to their unique interconnects such as through-silicon vias (TSVs).
This dissertation investigates EM in various interconnect structures, and applies the EM models to optimize IC layout. First, modeling of EM is developed for chip-level interconnects, such as wires, local vias, TSVs, and multi-scale vias (MSVs). Based on the models, fast and accurate EM-prediction methods are proposed for the chip-level designs. After that, by utilizing the EM-prediction methods, the layout optimization methods are suggested, such as EM-aware routing for 3D ICs and EM-aware redundant via insertion for the future technology nodes in VLSI.
Experimental results show that the proposed EM modeling approaches enable fast and accurate EM evaluation for chip design, and the EM-aware layout optimization methods improve EM-robustness of advanced VLSI designs.Electrical and Computer Engineerin
A survey of carbon nanotube interconnects for energy efficient integrated circuits
This article is a review of the state-of-art carbon nanotube interconnects for Silicon application with respect to the recent literature. Amongst all the research on carbon nanotube interconnects, those discussed here cover 1) challenges with current copper interconnects, 2) process & growth of carbon nanotube interconnects compatible with back-end-of-line integration, and 3) modeling and simulation for circuit-level benchmarking and performance prediction. The focus is on the evolution of carbon nanotube interconnects from the process, theoretical modeling, and experimental characterization to on-chip interconnect applications. We provide an overview of the current advancements on carbon nanotube interconnects and also regarding the prospects for designing energy efficient integrated circuits. Each selected category is presented in an accessible manner aiming to serve as a survey and informative cornerstone on carbon nanotube interconnects relevant to students and scientists belonging to a range of fields from physics, processing to circuit design
Recommended from our members
Simulation for Reliability, Hardware Security, and Ising Computing in VLSI Chip Design
The continued scaling of VLSI circuits has provided a wealth of opportunities andchallenges to the VLSI circuit design area. Both these challenges and opportunities, however,require new simulation tools that can enable their solution or exploitation as classicalmethods typically dealt with problem domains with smaller scales or less complexity. Inthis dissertation, simulation methods are presented to address the emerging VLSI designtopics of Electromigration induced aging and Ising computing and are then applied to theapplication areas of hardware security and graph partitioning respectively.The Electromigration aging effect in VLSI circuits is a long-term reliability issueaffecting current carrying metal wires leading to IR drop degradation. Typically, simpleanalytical equations can determine a wire’s effective age or if it will be affected by the EMaging effect at all. However, these classical methods are overly conservative and can lead toover design or unnecessary design iterations. Furthermore, it is expected that the EM agingeffect will become more severe in future Integrated Cirucits (ICs) due to increasing currentdensities and the prevalance of polycrystaline copper atom structures seen at small wiredimensions. For this reason, more comprehensive simulation techniques that can efficientlysimulate the EM effect with less conservative results can help mitigate overdesign andincrease design margins while reducing design iterations.The area of Hardware Security is becoming increasingly important as the chipsupply chain becomes more globalized and the integrity of chips becomes more diffiuclt toverify. Utilizing the accurate simulation techniques for EM, we can utilize this reliabilityeffect to demonstrate how a reliability based attack could be perpatrated. Furthermore, wecan utilize this aging effect as a defense mechanism to help us validate the integrity of anIC and detect counterfeit chips in the component supply chain market.Ising computing is an emerging method of solving combinatorial optimization problemsby simulating the interactions of so-called spin glasses and their interactions. Borrowingconcepts from quantum computing, this methods mimics the quantum interaction betweenspin glasses in such a way that finding a ground state of these spin glass models leadsto the solution of a particular problem. In this dissertation, effective methods of simulatingthe spin glass interactions using General Purpose Graphics Processing Units (GPGPUs)and finding their ground state are developed.In addition to the GPU based Ising model simulations, important combinatorialproblems can be mapped to the Ising model. In this dissertation the Ising solver is appliedto graph partitioning which can be utilized in VLSI design and many other domains as well.Specifically, solvers for the maxcut problem and the balanced min-cut partitioning problemare developed
Layout regularity metric as a fast indicator of process variations
Integrated circuits design faces increasing challenge as we scale down due to the increase of the effect of sensitivity to process variations. Systematic variations induced by different steps in the lithography process affect both parametric and functional yields of the designs. These variations are known, themselves, to be affected by layout topologies. Design for Manufacturability (DFM) aims at defining techniques that mitigate variations and improve yield. Layout regularity is one of the trending techniques suggested by DFM to mitigate process variations effect. There are several solutions to create regular designs, like restricted design rules and regular fabrics. These regular solutions raised the need for a regularity metric. Metrics in literature are insufficient for different reasons; either because they are qualitative or computationally intensive. Furthermore, there is no study relating either lithography or electrical variations to layout regularity. In this work, layout regularity is studied in details and a new geometrical-based layout regularity metric is derived. This metric is verified against lithographic simulations and shows good correlation. Calculation of the metric takes only few minutes on 1mm x 1mm design, which is considered fast compared to the time taken by simulations. This makes it a good candidate for pre-processing the layout data and selecting certain areas of interest for lithographic simulations for faster throughput. The layout regularity metric is also compared against a model that measures electrical variations due to systematic lithographic variations. The validity of using the regularity metric to flag circuits that have high variability using the developed electrical variations model is shown. The regularity metric results compared to the electrical variability model results show matching percentage that can reach 80%, which means that this metric can be used as a fast indicator of designs more susceptible to lithography and hence electrical variations
Investigation into yield and reliability enhancement of TSV-based three-dimensional integration circuits
Three dimensional integrated circuits (3D ICs) have been acknowledged as a promising technology to overcome the interconnect delay bottleneck brought by continuous CMOS scaling. Recent research shows that through-silicon-vias (TSVs), which act as vertical links between layers, pose yield and reliability challenges for 3D design. This thesis presents three original contributions.The first contribution presents a grouping-based technique to improve the yield of 3D ICs under manufacturing TSV defects, where regular and redundant TSVs are partitioned into groups. In each group, signals can select good TSVs using rerouting multiplexers avoiding defective TSVs. Grouping ratio (regular to redundant TSVs in one group) has an impact on yield and hardware overhead. Mathematical probabilistic models are presented for yield analysis under the influence of independent and clustering defect distributions. Simulation results using MATLAB show that for a given number of TSVs and TSV failure rate, careful selection of grouping ratio results in achieving 100% yield at minimal hardware cost (number of multiplexers and redundant TSVs) in comparison to a design that does not exploit TSV grouping ratios. The second contribution presents an efficient online fault tolerance technique based on redundant TSVs, to detect TSV manufacturing defects and address thermal-induced reliability issue. The proposed technique accounts for both fault detection and recovery in the presence of three TSV defects: voids, delamination between TSV and landing pad, and TSV short-to-substrate. Simulations using HSPICE and ModelSim are carried out to validate fault detection and recovery. Results show that regular and redundant TSVs can be divided into groups to minimise area overhead without affecting the fault tolerance capability of the technique. Synthesis results using 130-nm design library show that 100% repair capability can be achieved with low area overhead (4% for the best case). The last contribution proposes a technique with joint consideration of temperature mitigation and fault tolerance without introducing additional redundant TSVs. This is achieved by reusing spare TSVs that are frequently deployed for improving yield and reliability in 3D ICs. The proposed technique consists of two steps: TSV determination step, which is for achieving optimal partition between regular and spare TSVs into groups; The second step is TSV placement, where temperature mitigation is targeted while optimizing total wirelength and routing difference. Simulation results show that using the proposed technique, 100% repair capability is achieved across all (five) benchmarks with an average temperature reduction of 75.2? (34.1%) (best case is 99.8? (58.5%)), while increasing wirelength by a small amount
Analog layout design automation: ILP-based analog routers
The shrinking design window and high parasitic sensitivity in the advanced technology have imposed special challenges on the analog and radio frequency (RF) integrated circuit design. In this thesis, we propose a new methodology to address such a deficiency based on integer linear programming (ILP) but without compromising the capability of handling any special constraints for the analog routing problems. Distinct from the conventional methods, our algorithm utilizes adaptive resolutions for various routing regions. For a more congested region, a routing grid with higher resolution is employed, whereas a lower-resolution grid is adopted to a less crowded routing region. Moreover, we strengthen its speciality in handling interconnect width control so as to route the electrical nets based on analog constraints while considering proper interconnect width to address the acute interconnect parasitics, mismatch minimization, and electromigration effects simultaneously. In addition, to tackle the performance degradation due to layout dependent effects (LDEs) and take advantage of optical proximity correction (OPC) for resolution enhancement of subwavelength lithography, in this thesis we have also proposed an innovative LDE-aware analog layout migration scheme, which is equipped with our special routing methodology. The LDE constraints are first identified with aid of a special sensitivity analysis and then satisfied during the layout migration process. Afterwards the electrical nets are routed by an extended OPC-inclusive ILP-based analog router to improve the final layout image fidelity while the routability and analog constraints are respected in the meantime. The experimental results demonstrate the effectiveness and efficiency of our proposed methods in terms of both circuit performance and image quality compared to the previous works
Effective network grid synthesis and optimization for high performance very large scale integration system design
制度:新 ; 文部省報告番号:甲2642号 ; 学位の種類:博士(工学) ; 授与年月日:2008/3/15 ; 早大学位記番号:新480
Design methodology and productivity improvement in high speed VLSI circuits
2017 Spring.Includes bibliographical references.To view the abstract, please see the full text of the document
The impact of design techniques in the reduction of power consumption of SoCs Multimedia
Orientador: Guido Costa Souza de AraújoDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: A indústria de semicondutores sempre enfrentou fortes demandas em resolver problema de dissipação de calor e reduzir o consumo de energia em dispositivos. Esta tendência tem sido intensificada nos últimos anos com o movimento de sustentabilidade ambiental. A concepção correta de um sistema eletrônico de baixo consumo de energia é um problema de vários níveis de complexidade e exige estratégias sistemáticas na sua construção. Fora disso, a adoção de qualquer técnica de redução de energia sempre está vinculada com objetivos especiais e provoca alguns impactos no projeto. Apesar dos projetistas conheçam bem os impactos de forma qualitativa, as detalhes quantitativas ainda são incógnitas ou apenas mantidas dentro do 'know-how' das empresas. Neste trabalho, de acordo com resultados experimentais baseado num plataforma de SoC1 industrial, tentamos quantificar os impactos derivados do uso de técnicas de redução de consumo de energia. Nos concentramos em relacionar o fator de redução de energia de cada técnica aos impactos em termo de área, desempenho, esforço de implementação e verificação. Na ausência desse tipo de dados, que relacionam o esforço de engenharia com as metas de consumo de energia, incertezas e atrasos serão frequentes no cronograma de projeto. Esperamos que este tipo de orientações possam ajudar/guiar os arquitetos de projeto em selecionar as técnicas adequadas para reduzir o consumo de energia dentro do alcance de orçamento e cronograma de projetoAbstract: The semiconductor industry has always faced strong demands to solve the problem of heat dissipation and reduce the power consumption in electronic devices. This trend has been increased in recent years with the action of environmental sustainability. The correct conception of an electronic system for low power consumption is an issue with multiple levels of complexities and requires systematic approaches in its construction. However, the adoption of any technique for reducing the power consumption is always linked with some specific goals and causes some impacts on the project. Although the designers know well that these impacts can affect the design in a quality aspect, the quantitative details are still unkown or just be kept inside the company's know-how. In this work, according to the experimental results based on an industrial SoC2 platform, we try to quantify the impacts of the use of low power techniques. We will relate the power reduction factor of each technique to the impact in terms of area, performance, implementation and verification effort. In the absence of such data, which relates the engineering effort to the goals of power consumption, uncertainties and delays are frequent. We hope that such guidelines can help/guide the project architects in selecting the appropriate techniques to reduce the power consumption within the limit of budget and project scheduleMestradoCiência da ComputaçãoMestre em Ciência da Computaçã
- …