Multiscale microstructures and microstructural effects on the reliability of microbumps in three-dimensional integration

The dimensions of microbumps in three-dimensional integration reach microscopic scales and thus necessitate a study of the multiscale microstructures in microbumps. Here, we present simulated mesoscale and atomic-scale microstructures of microbumps using phase field and phase field crystal models. Coupled microstructure, mechanical stress, and electromigration modeling was performed to highlight the microstructural effects on the reliability of microbumps. The results suggest that the size and geometry of microbumps can influence both the mesoscale and atomic-scale microstructural formation during solidification. An external stress imposed on the microbump can cause ordered phase growth along the boundaries of the microbump. Mesoscale microstructures formed in the microbumps from solidification, solid state phase separation, and coarsening processes suggest that the microstructures in smaller microbumps are more heterogeneous. Due to the differences in microstructures, the von Mises stress distributions in microbumps of different sizes and geometries vary. In addition, a combined effect resulting from the connectivity of the phase morphology and the amount of interface present in the mesoscale microstructure can influence the electromigration reliability of microbumps

Multiscale microstructures and microstructural effects on the reliability of microbumps in three-dimensional integration

The dimensions of microbumps in three-dimensional integration reach microscopic scales and thus necessitate a study of the multiscale microstructures in microbumps. Here, we present simulated mesoscale and atomic-scale microstructures of microbumps using phase field and phase field crystal models. Coupled microstructure, mechanical stress, and electromigration modeling was performed to highlight the microstructural effects on the reliability of microbumps. The results suggest that the size and geometry of microbumps can influence both the mesoscale and atomic-scale microstructural formation during solidification. An external stress imposed on the microbump can cause ordered phase growth along the boundaries of the microbump. Mesoscale microstructures formed in the microbumps from solidification, solid state phase separation, and coarsening processes suggest that the microstructures in smaller microbumps are more heterogeneous. Due to the differences in microstructures, the von Mises stress distributions in microbumps of different sizes and geometries vary. In addition, a combined effect resulting from the connectivity of the phase morphology and the amount of interface present in the mesoscale microstructure can influence the electromigration reliability of microbumps

Multiphysics modeling and simulation for large-scale integrated circuits

This dissertation is a process of seeking solutions to two important and challenging problems related to the design of modern integrated circuits (ICs): the ever increasing couplings among the multiphysics and the large problem size arising from the escalating complexity of the designs. A multiphysics-based computer-aided design methodology is proposed and realized to address multiple aspects of a design simultaneously, which include electromagnetics, heat transfer, fluid dynamics, and structure mechanics. The multiphysics simulation is based on the finite element method for its unmatched capabilities in handling complicate geometries and material properties. The capability of the multiphysics simulation is demonstrated through its applications in a variety of important problems, including the static and dynamic IR-drop analyses of power distribution networks, the thermal-ware high-frequency characterization of through-silicon-via structures, the full-wave electromagnetic analysis of high-power RF/microwave circuits, the modeling and analysis of three-dimensional ICs with integrated microchannel cooling, the characterization of micro- and nanoscale electrical-mechanical systems, and the modeling of decoupling capacitor derating in the power integrity simulations. To perform the large-scale analysis in a highly efficient manner, a domain decomposition scheme, parallel computing, and an adaptive time-stepping scheme are incorporated into the proposed multiphysics simulation. Significant reduction in computation time is achieved through the two numerical schemes and the parallel computing with multiple processors

Through Silicon Via Field-Effect Transistor with Hafnia-based Ferroelectrics and the Doping of Silicon by Gallium Implantation Utilizing a Focused Ion Beam System

3-dimensional integration has become a standard to further increase the transistor density and to enhance the integrated functionality in microchips. Integrated circuits are stacked on top of each other and copper-filled through-silicon VIAs (TSVs) are the industry-accepted choice for their vertical electrical connection. The aim of this work is to functionalize the TSVs by implementing vertical field-effect transistors inside the via holes. The front and back sides of 200 ... 300 µm thin silicon wafers were doped to create the source/drain regions of n- and p-FETs. The TSVFETs showed very stable saturation currents and on/off current ratios of about 10^6 (n-TSVFET) and 10^3 (p-TSVFET) for a gate voltage magnitude of 4V. The use of hafnium zirconium oxide on a thin SiO_2 interface layer as gate dielectric material in a p-TSVFET, enabled the implementation of a charge trapping memory inside the TSVs, showing a memory window of about 1V. This allows the non-volatile storage of the transistor on/off state. In addition, the demonstration of the use of gallium as the source/drain dopant in planar p-FET test structures (ion implanted from a focused ion beam tool) paves the way for maskless doping and for a process flow with a low thermal budget. It was shown, that ion implanted gallium can be activated and annealed at relatively low temperatures of 500 °C ... 700 °C.:Abstract / Kurzzusammenfassung Danksagung Index I List of Figures III List of Tables X List of Symbols XI List of Abbreviations XV 1 Introduction 1 2 Fundamentals 5 2.1 Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) 5 2.1.1 Historical Development - Technological Advancements 7 2.1.2 Field-Effect Transistors in Semiconductor Memories 10 2.2 3D Integration and the Use of TSVs (Through Silicon VIAs) 16 2.3 Doping of Silicon 19 2.3.1 Doping by Thermal Diffusion 20 2.3.2 Doping by Ion Implantation 22 3 Electrical Characterization 24 3.1 Resistivity Measurements 24 3.1.1 Resistance Determination by Four-Point Probes Measurement 24 3.1.2 Contact Resistivity 27 3.1.3 Doping Concentration 32 3.2 C-V Measurements 35 3.2.1 Fundamentals of MIS C-V Measurements 35 3.2.2 Interpretation of C-V Measurements 37 3.3 Transistor Measurements 41 3.3.1 Output Characteristics (I_D-V_D) 41 3.3.2 Transfer Characteristics (I_D-V_G) 42 4 TSV Transistor 45 4.1 Idea and Motivation 45 4.2 Design and Layout of the TSV Transistor 47 4.2.1 Design of the TSV Transistor Structures 47 4.2.2 Test Structures for Planar FETs 48 5 Variations in the Integration Scheme of the TSV Transistor 51 5.1 Doping by Diffusion from Thin Films 51 5.1.1 Determination of Doping Profiles 52 5.1.2 n- and p- TSVFETs Doped Manufactures by the Use of the Diffusion Technique 59 5.2 Ferroelectric Hafnium-Zirconium-Oxide (HZO) in the Gate Stack 81 5.2.1 Planar ferroelectric p-MOSFETs Doped by Thermal Diffusion 82 5.2.2 p-TSVFETs with Hafnium-Zirconium-Oxide Metal Gate 90 5.3 Doping by Ion Implantation of Gallium with a Focused Ion Beam (FIB) Tool 96 5.3.1 Ga doped Si Diodes 97 5.3.2 Planar p-MOSFETs Doped by Ga Implantation 108 5.3.3 Proposal for a parallel integration of Cu TSVs and p-TSVFETs 117 6 Summary and Outlook 120 Bibliography XVIII A Appendix XXXVI A.1 Resistivity and Dopant Density XXXVI A.2 Mask set for the TSVFET XXXVII A.3 Mask Design of the Planar Test Structures XXXVIII Curriculum Vitae XXXIX List of Scientific Publications XL

Thermal Management for Dependable On-Chip Systems

This thesis addresses the dependability issues in on-chip systems from a thermal perspective. This includes an explanation and analysis of models to show the relationship between dependability and tempature. Additionally, multiple novel methods for on-chip thermal management are introduced aiming to optimize thermal properties. Analysis of the methods is done through simulation and through infrared thermal camera measurements

Microelectromechanical Systems and Devices

The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators

Micro/Nano Structures and Systems

Micro/Nano Structures and Systems: Analysis, Design, Manufacturing, and Reliability is a comprehensive guide that explores the various aspects of micro- and nanostructures and systems. From analysis and design to manufacturing and reliability, this reprint provides a thorough understanding of the latest methods and techniques used in the field. With an emphasis on modern computational and analytical methods and their integration with experimental techniques, this reprint is an invaluable resource for researchers and engineers working in the field of micro- and nanosystems, including micromachines, additive manufacturing at the microscale, micro/nano-electromechanical systems, and more. Written by leading experts in the field, this reprint offers a complete understanding of the physical and mechanical behavior of micro- and nanostructures, making it an essential reference for professionals in this field