1,025 research outputs found
Recommended from our members
Efficient architectures and power modelling of multiresolution analysis algorithms on FPGA
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.In the past two decades, there has been huge amount of interest in Multiresolution Analysis Algorithms (MAAs) and their applications. Processing some of their applications such as medical imaging are computationally intensive, power hungry and requires large amount of memory which cause a high demand for efficient algorithm implementation, low power architecture and acceleration. Recently, some MAAs such as Finite Ridgelet Transform (FRIT) Haar Wavelet Transform (HWT) are became very popular and they are suitable for a number of image processing applications such as detection of line singularities and contiguous edges, edge detection (useful for compression and feature detection), medical image denoising and segmentation. Efficient hardware implementation and acceleration of these algorithms particularly when addressing large problems are becoming very chal-lenging and consume lot of power which leads to a number of issues including mobility, reliability concerns. To overcome the computation problems, Field Programmable Gate Arrays (FPGAs) are the technology of choice for accelerating computationally intensive applications due to their high performance. Addressing the power issue requires optimi- sation and awareness at all level of abstractions in the design flow.
The most important achievements of the work presented in this thesis are summarised
here.
Two factorisation methodologies for HWT which are called HWT Factorisation Method1 and (HWTFM1) and HWT Factorasation Method2 (HWTFM2) have been explored to increase number of zeros and reduce hardware resources. In addition, two novel efficient and optimised architectures for proposed methodologies based on Distributed Arithmetic (DA) principles have been proposed. The evaluation of the architectural results have shown that the proposed architectures results have reduced the arithmetics calculation (additions/subtractions) by 33% and 25% respectively compared to direct implementa-tion of HWT and outperformed existing results in place. The proposed HWTFM2 is implemented on advanced and low power FPGA devices using Handel-C language. The FPGAs implementation results have outperformed other existing results in terms of area and maximum frequency. In addition, a novel efficient architecture for Finite Radon Trans-form (FRAT) has also been proposed. The proposed architecture is integrated with the developed HWT architecture to build an optimised architecture for FRIT. Strategies such as parallelism and pipelining have been deployed at the architectural level for efficient im-plementation on different FPGA devices. The proposed FRIT architecture performance has been evaluated and the results outperformed some other existing architecture in place. Both FRAT and FRIT architectures have been implemented on FPGAs using Handel-C language. The evaluation of both architectures have shown that the obtained results out-performed existing results in place by almost 10% in terms of frequency and area. The proposed architectures are also applied on image data (256 Ā£ 256) and their Peak Signal to Noise Ratio (PSNR) is evaluated for quality purposes.
Two architectures for cyclic convolution based on systolic array using parallelism and pipelining which can be used as the main building block for the proposed FRIT architec-ture have been proposed. The first proposed architecture is a linear systolic array with pipelining process and the second architecture is a systolic array with parallel process. The second architecture reduces the number of registers by 42% compare to first architec-ture and both architectures outperformed other existing results in place. The proposed pipelined architecture has been implemented on different FPGA devices with vector size (N) 4,8,16,32 and word-length (W=8). The implementation results have shown a signifi-cant improvement and outperformed other existing results in place.
Ultimately, an in-depth evaluation of a high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called func-tional level power modelling approach have been presented. The mathematical techniques that form the basis of the proposed power modeling has been validated by a range of custom IP cores. The proposed power modelling is scalable, platform independent and compares favorably with existing approaches. A hybrid, top-down design flow paradigm integrating functional level power modelling with commercially available design tools for systematic optimisation of IP cores has also been developed. The in-depth evaluation of this tool enables us to observe the behavior of different custom IP cores in terms of power consumption and accuracy using different design methodologies and arithmetic techniques on virous FPGA platforms. Based on the results achieved, the proposed model accuracy is almost 99% true for all IP core's Dynamic Power (DP) components.Thomas Gerald Gray Charitable Trus
Recommended from our members
Efficient FPGA implementation and power modelling of image and signal processing IP cores
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Field Programmable Gate Arrays (FPGAs) are the technology of choice in a number ofimage
and signal processing application areas such as consumer electronics, instrumentation,
medical data processing and avionics due to their reasonable energy consumption, high performance, security, low design-turnaround time and reconfigurability. Low power FPGA
devices are also emerging as competitive solutions for mobile and thermally constrained platforms. Most computationally intensive image and signal processing algorithms also consume a lot of power leading to a number of issues including reduced mobility, reliability concerns and increased design cost among others. Power dissipation has become one of the most important challenges, particularly for FPGAs. Addressing this problem requires optimisation and awareness at all levels in the design flow. The key achievements of the
work presented in this thesis are summarised here. Behavioural level optimisation strategies have been used for implementing matrix product and inner product through the use of mathematical techniques such as Distributed Arithmetic (DA) and its variations including offset binary coding, sparse factorisation and novel vector level transformations. Applications to test the impact of these algorithmic and arithmetic transformations include the fast Hadamard/Walsh transforms and Gaussian mixture models. Complete design space exploration has been performed on these cores, and where appropriate, they have been shown to clearly outperform comparable existing implementations. At the architectural level, strategies such as parallelism, pipelining and systolisation have been successfully applied for the design and optimisation of a number of
cores including colour space conversion, finite Radon transform, finite ridgelet transform and circular convolution. A pioneering study into the influence of supply voltage scaling for FPGA based designs, used in conjunction with performance enhancing strategies such as parallelism and pipelining has been performed. Initial results are very promising and indicated significant potential for future research in this area.
A key contribution of this work includes the development of a novel high level power macromodelling technique for design space exploration and characterisation of custom IP cores for FPGAs, called Functional Level Power Analysis and Modelling (FLPAM). FLPAM
is scalable, platform independent and compares favourably with existing approaches. A hybrid, top-down design flow paradigm integrating FLPAM with commercially available design tools for systematic optimisation of IP cores has also been developed
Using Fine Grain Approaches for highly reliable Design of FPGA-based Systems in Space
Nowadays using SRAM based FPGAs in space missions is increasingly considered due to their flexibility and reprogrammability. A challenge is the devices sensitivity to radiation effects that increased with modern architectures due to smaller CMOS structures. This work proposes fault tolerance methodologies, that are based on a fine grain view to modern reconfigurable architectures. The focus is on SEU mitigation challenges in SRAM based FPGAs which can result in crucial situations
Design and analysis of efficient synthesis algorithms for EDAC functions in FPGAs
Error Detection and Correction (EDAC) functions have been widely used for protecting memories from single event upsets (SEU), which occur in environments with high levels of radiation or in deep submicron manufacturing technologies. This paper presents three novel synthesis algorithms that obtain areaefficient implementations for a given EDAC function, with the ultimate aim of reducing the number of sensitive configuration bits in SRAM-based Field-Programmable Gate Arrays (FPGAs). Having less sensitive bits results in a lower chance of suffering a SEU in the EDAC circuitry, thus improving the overall reliability of the whole system. Besides minimizing area, the proposed algorithms also focus on improving other figures of merit like circuit speed and power consumption. The executed benchmarks show that, when compared to other modern synthesis tools, the proposed algorithms can reduce the number of utilized look-up tables (LUTs) up to a 34.48%. Such large reductions in area usage ultimately result in reliability improvements over 10% for the implemented EDAC cores, measured as MTBF (Mean Time Between Failures). On the other hand, maximum path delays and power consumptions can be reduced up to a 17.72% and 34.37% respectively on the placed and routed designs.This work was supported by the Spanish Ministry of Educacion, Cultura y Deporte under the grant FPU12/05573, and by the Spanish Ministry of Economıa project ESP2013-48362-C2-2-P, in the frame of the activities of the Instrument Control Unit of the Infrarred Instrument of the ESA Euclid Mission carried out by the Dept. of Electronics and Computer Technology of the Universidad PolitƩcnica de Cartagen
High-Level Annotation of Routing Congestion for Xilinx Vivado HLS Designs
Ever since transistor cost stopped decreasing, customized programmable platforms, such as field-programmable gate arrays (FPGAs), became a major way to improve software execution performance and energy consumption. While software developers can use high-level synthesis (HLS) to speed up register-transfer level (RTL) code generation from C++ or OpenCL source code, placement and routing issues, such as congestion, can still prevent achieving an FPGA programming bitstream or dramatically reduce the FPGA implementation performance. Congestion reports from physical design tools refer to thousands of RTL signal names instead of developer-accessible identifiers and statements, considerably complicating the developer understanding and resolution of the issues at the source level. We propose a high-level back-annotation flow that summarizes the routing congestion issues at the source level by analyzing the reports from the FPGA physical design tools and the internal debugging files of the HLS tools. Our flow describes congestion using comments back-annotated on the source code and identifies if the congestion causes are the on-chip memories or the DSP units (multipliers/adders), which are the shared resources very often associated with routing problems on FPGAs. We demonstrate on realistic large designs how the information provided by our flow helps to quickly spot congestion causes at the source level and to solve them using appropriate HLS directives
- ā¦