Radiation Hardened by Design Methodologies for Soft-Error Mitigated Digital Architectures

abstract: Digital architectures for data encryption, processing, clock synthesis, data transfer, etc. are susceptible to radiation induced soft errors due to charge collection in complementary metal oxide semiconductor (CMOS) integrated circuits (ICs). Radiation hardening by design (RHBD) techniques such as double modular redundancy (DMR) and triple modular redundancy (TMR) are used for error detection and correction respectively in such architectures. Multiple node charge collection (MNCC) causes domain crossing errors (DCE) which can render the redundancy ineffectual. This dissertation describes techniques to ensure DCE mitigation with statistical confidence for various designs. Both sequential and combinatorial logic are separated using these custom and computer aided design (CAD) methodologies. Radiation vulnerability and design overhead are studied on VLSI sub-systems including an advanced encryption standard (AES) which is DCE mitigated using module level coarse separation on a 90-nm process with 99.999% DCE mitigation. A radiation hardened microprocessor (HERMES2) is implemented in both 90-nm and 55-nm technologies with an interleaved separation methodology with 99.99% DCE mitigation while achieving 4.9% increased cell density, 28.5 % reduced routing and 5.6% reduced power dissipation over the module fences implementation. A DMR register-file (RF) is implemented in 55 nm process and used in the HERMES2 microprocessor. The RF array custom design and the decoders APR designed are explored with a focus on design cycle time. Quality of results (QOR) is studied from power, performance, area and reliability (PPAR) perspective to ascertain the improvement over other design techniques. A radiation hardened all-digital multiplying pulsed digital delay line (DDL) is designed for double data rate (DDR2/3) applications for data eye centering during high speed off-chip data transfer. The effect of noise, radiation particle strikes and statistical variation on the designed DDL are studied in detail. The design achieves the best in class 22.4 ps peak-to-peak jitter, 100-850 MHz range at 14 pJ/cycle energy consumption. Vulnerability of the non-hardened design is characterized and portions of the redundant DDL are separated in custom and auto-place and route (APR). Thus, a range of designs for mission critical applications are implemented using methodologies proposed in this work and their potential PPAR benefits explored in detail.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Exploration and Design of Power-Efficient Networked Many-Core Systems

Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level. From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques. From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented. Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast

VLSI Design

This book provides some recent advances in design nanometer VLSI chips. The selected topics try to present some open problems and challenges with important topics ranging from design tools, new post-silicon devices, GPU-based parallel computing, emerging 3D integration, and antenna design. The book consists of two parts, with chapters such as: VLSI design for multi-sensor smart systems on a chip, Three-dimensional integrated circuits design for thousand-core processors, Parallel symbolic analysis of large analog circuits on GPU platforms, Algorithms for CAD tools VLSI design, A multilevel memetic algorithm for large SAT-encoded problems, etc

An optically pumped magnetometer working in the light-shift dispersed Mz mode

We present an optically pumped magnetometer working in a new operational mode— the light-shift dispersed Mz (LSD-Mz) mode. It is realized combining various features; (1) high power off-resonant optical pumping; (2) Mz configuration, where pumping light and magnetic field of interest are oriented parallel to each other; (3) use of small alkali metal vapor cells of identical properties in integrated array structures, where two such cells are pumped by circularly polarized light of opposite helicity; and (4) subtraction of the Mz signals of these two cells. The LSD-Mz magnetometer’s performance depends on the inherent and very complex interplay of input parameters. In order to find the configuration of optimal magnetometer resolution, a sensitivity analysis of the input parameters by means of Latin Hypercube Sampling was carried out. The resulting datasets of the multi-dimensional parameter space exploration were assessed by a subsequent physically reasonable interpretation. Finally, the best shot-noise limited magnetic field resolution was determined within that parameter space. As the result, using two 50 mm3 integrated vapor cells a magnetic field resolution below 10 fT/√Hz at Earth’s magnetic field strength is possible

RF CMOS receiver front-end using a reflex amplifier

A concept for an RF-CMOS receiver with reflex topology is developed and tested, using OrCad as the primary design and simulation tool. The main idea of the reflex topology is to reuse a Low Noise Amplifier (LNA) stage in the circuit and thus eliminate one high power consumption stage. A Gilbert cell is used for down conversion, with the benefit of low noise and low power while maintaining gain. A set of passive diplexers allows reuse of the LNA at the RF and IF. The complete circuit was simulated using 0.18 micron and 0.5 micron AMI technology. Parameters for the transistors are imported from MOSIS development tools and design specifications for the purpose of production of this device. The overall system was simulated using the 900 MHz frequency for radio frequency (RF) and shows substantial gain and low noise figure. Lastly, the Gilbert cell mixer has been modified in an attempt to further reduce power consumption. Instead of using a local oscillator, we designed the Gilbert cell so it would self-oscillate. Output results and linearity characteristics are shown through simulation

NASA SERC 1990 Symposium on VLSI Design

This document contains papers presented at the first annual NASA Symposium on VLSI Design. NASA's involvement in this event demonstrates a need for research and development in high performance computing. High performance computing addresses problems faced by the scientific and industrial communities. High performance computing is needed in: (1) real-time manipulation of large data sets; (2) advanced systems control of spacecraft; (3) digital data transmission, error correction, and image compression; and (4) expert system control of spacecraft. Clearly, a valuable technology in meeting these needs is Very Large Scale Integration (VLSI). This conference addresses the following issues in VLSI design: (1) system architectures; (2) electronics; (3) algorithms; and (4) CAD tools

Resource-aware Programming in a High-level Language - Improved performance with manageable effort on clustered MPSoCs

Bis 2001 bedeutete Moores und Dennards Gesetz eine Verdoppelung der Ausführungszeit alle 18 Monate durch verbesserte CPUs. Heute ist Nebenläufigkeit das dominante Mittel zur Beschleunigung von Supercomputern bis zu mobilen Geräten. Allerdings behindern neuere Phänomene wie "Dark Silicon" zunehmend eine weitere Beschleunigung durch Hardware. Um weitere Beschleunigung zu erreichen muss sich auch die Soft­ware mehr ihrer Hardware Resourcen gewahr werden. Verbunden mit diesem Phänomen ist eine immer heterogenere Hardware. Supercomputer integrieren Beschleuniger wie GPUs. Mobile SoCs (bspw. Smartphones) integrieren immer mehr Fähigkeiten. Spezialhardware auszunutzen ist eine bekannte Methode, um den Energieverbrauch zu senken, was ein weiterer wichtiger Aspekt ist, welcher mit der reinen Geschwindigkeit abgewogen werde muss. Zum Beispiel werden Supercomputer auch nach "Performance pro Watt" bewertet. Zur Zeit sind systemnahe low-level Programmierer es gewohnt über Hardware nachzudenken, während der gemeine high-level Programmierer es vorzieht von der Plattform möglichst zu abstrahieren (bspw. Cloud). "High-level" bedeutet nicht, dass Hardware irrelevant ist, sondern dass sie abstrahiert werden kann. Falls Sie eine Java-Anwendung für Android entwickeln, kann der Akku ein wichtiger Aspekt sein. Irgendwann müssen aber auch Hochsprachen resourcengewahr werden, um Geschwindigkeit oder Energieverbrauch zu verbessern. Innerhalb des Transregio "Invasive Computing" habe ich an diesen Problemen gearbeitet. In meiner Dissertation stelle ich ein Framework vor, mit dem man Hochsprachenanwendungen resourcengewahr machen kann, um so die Leistung zu verbessern. Das könnte beispielsweise erhöhte Effizienz oder schnellerer Ausführung für das System als Ganzes bringen. Ein Kerngedanke dabei ist, dass Anwendungen sich nicht selbst optimieren. Stattdessen geben sie alle Informationen an das Betriebssystem. Das Betriebssystem hat eine globale Sicht und trifft Entscheidungen über die Resourcen. Diesen Prozess nennen wir "Invasion". Die Aufgabe der Anwendung ist es, sich an diese Entscheidungen anzupassen, aber nicht selbst welche zu fällen. Die Herausforderung besteht darin eine Sprache zu definieren, mit der Anwendungen Resourcenbedingungen und Leistungsinformationen kommunizieren. So eine Sprache muss ausdrucksstark genug für komplexe Informationen, erweiterbar für neue Resourcentypen, und angenehm für den Programmierer sein. Die zentralen Beiträge dieser Dissertation sind: Ein theoretisches Modell der Resourcen-Verwaltung, um die Essenz des resourcengewahren Frameworks zu beschreiben, die Korrektheit der Entscheidungen des Betriebssystems bezüglich der Bedingungen einer Anwendung zu begründen und zum Beweis meiner Thesen von Effizienz und Beschleunigung in der Theorie. Ein Framework und eine Übersetzungspfad resourcengewahrer Programmierung für die Hochsprache X10. Zur Bewertung des Ansatzes haben wir Anwendungen aus dem High Performance Computing implementiert. Eine Beschleunigung von 5x konnte gemessen werden. Ein Speicherkonsistenzmodell für die X10 Programmiersprache, da dies ein notwendiger Schritt zu einer formalen Semantik ist, die das theoretische Modell und die konkrete Implementierung verknüpft. Zusammengefasst zeige ich, dass resourcengewahre Programmierung in Hoch\-sprachen auf zukünftigen Architekturen mit vielen Kernen mit vertretbarem Aufwand machbar ist und die Leistung verbessert

Data driven techniques for on-board performance estimation and prediction in vehicular applications.

L'abstract è presente nell'allegato / the abstract is in the attachmen

Integration of Hybrid Passive Optical Networks (PON) with Radio over Fiber (RoF)

A cost effective, robust, and high capacity access network necessitated to meet the mounting customer demands for bandwidth-desirous services. A remarkable evolution of access networks is observed both in wired and wireless, predominantly driven by ever-changing bandwidth requirements. A wireless connection releases the end user from the restrictions of a physical link to a network that results in mobility, flexibleness, and ease of use. Whereas, optical networks offer immense amount of bandwidth that appease the most bandwidth voracious customers compared to bandwidth limited wireless networks. The integration of wired and wireless domains in the access landscape that presents a technical analysis of optical architectures suitable to support radio over fiber (RoF) is the objective of this chapter. Investigate the main trends that drive the merger of fiber and wireless technologies in access networks. Moreover, study the primary terms and the particular transmission features of integrated fiber-radio links to form a well-defined classification of hybrid systems and techniques. This work also recognizes the major problems for realization of RoF systems and examines the limitation, advantages, and diversity of integrated RoF-PON technology