Hybrid force/position control for a 3-DOF 1T2R parallel robot: Implementation, simulations and experiments

"This is an Author's Accepted Manuscript of an article published in Cazalilla, José, Marina Vallés, Ángel Valera, Vicente Mata, and Miguel Díaz-Rodríguez. 2016. Hybrid Force/Position Control for a 3-DOF 1T2R Parallel Robot: Implementation, Simulations and Experiments. Mechanics Based Design of Structures and Machines 44 (1 2). Informa UK Limited: 16 31. doi:10.1080/15397734.2015.1030679, available online at: https://www.tandfonline.com/doi/full/10.1080/15397734.2015.1030679."[EN] A robot interacting with the environment requires that the end effector \hboxposition is tracked and that the forces of contact are kept below certain reference values. For instance, in a rehabilitation session using a robotic device, the contact forces are limited by the allowed strength of the human limbs and their complex-joints. In these cases, a control scheme which considers both position and force control is essential to avoid damage to either the end effector or the object interacting with the robot. This paper therefore develops a real-time force/position control scheme for a three-DOF parallel robot whose end effector holds a DOF one translation (1T) and two rotations (2R). The implemented hybrid force/position control considers, as a reference, the normal force on the mobile platform, which is measured by means of a load cell installed on the platform. The position control is designed to track the orientations of the robot either in joint or task space using a model-based control scheme with identified parameters. Moreover, the force control is based on a PD action. The control scheme is developed through simulations, before being applied to an actual parallel robot. The findings show that with the implemented controller, the actual robot accomplishes the reference values for the normal force on the mobile platform, while at the same time the platform accurately follows the required angular orientation.The authors wish to thank the Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) for the partial funding of this study under the projects DPI2011-28507-C02-01 and DPI2013-44227-R. This work was also partially supported by the Fondo Nacional de Ciencia, Tecnologia e Innovacion (FONACIT-Venezuela).Cazalilla, J.; Vallés Miquel, M.; Valera Fernández, Á.; Mata Amela, V.; Díaz-Rodríguez, M. (2016). Hybrid force/position control for a 3-DOF 1T2R parallel robot: Implementation, simulations and experiments. Mechanics Based Design of Structures and Machines. 44(1-2):16-31. https://doi.org/10.1080/15397734.2015.1030679S1631441-2Åström, K. J., & Murray, R. M. (2008). Feedback Systems. doi:10.1515/9781400828739Bellakehal, S., Andreff, N., Mezouar, Y., & Tadjine, M. (2011). Force/position control of parallel robots using exteroceptive pose measurements. Meccanica, 46(1), 195-205. doi:10.1007/s11012-010-9411-zCao, R., Gao, F., Zhang, Y., Pan, D., & Chen, W. (2014). A New Parameter Design Method of a 6-DOF Parallel Motion Simulator for a Given Workspace. Mechanics Based Design of Structures and Machines, 43(1), 1-18. doi:10.1080/15397734.2014.904234Carretero, J. A., Podhorodeski, R. P., Nahon, M. A., & Gosselin, C. M. (1999). Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator. Journal of Mechanical Design, 122(1), 17-24. doi:10.1115/1.533542Clavel, R. (1988). DELTA, a fast robot with parallel geometry.Proceedings of 18th International Symposium on Industrial Robot, Lausanne, April, 91–100.Díaz-Rodríguez, M., Mata, V., Valera, Á., & Page, Á. (2010). A methodology for dynamic parameters identification of 3-DOF parallel robots in terms of relevant parameters. Mechanism and Machine Theory, 45(9), 1337-1356. doi:10.1016/j.mechmachtheory.2010.04.007Diaz-Rodriguez, M., Valera, A., Mata, V., & Valles, M. (2013). Model-Based Control of a 3-DOF Parallel Robot Based on Identified Relevant Parameters. IEEE/ASME Transactions on Mechatronics, 18(6), 1737-1744. doi:10.1109/tmech.2012.2212716Farhat, N., Mata, V., Page, Á., & Valero, F. (2008). Identification of dynamic parameters of a 3-DOF RPS parallel manipulator. Mechanism and Machine Theory, 43(1), 1-17. doi:10.1016/j.mechmachtheory.2006.12.011Garg, A., Vikram, C. S., Gupta, S., Sutar, M. K., Pathak, P. M., Mehta, N. K., … Gupta, V. K. (2014). Design and Development of In Vivo Robot for Biopsy. Mechanics Based Design of Structures and Machines, 42(3), 278-295. doi:10.1080/15397734.2014.898587Gough, V. E., Whitehall, S. G. (1962). Universal tire test machine.Proceedings of 9th International Technical Congress FISITA, pp. 117–135.García de Jalón, J., & Bayo, E. (1994). Kinematic and Dynamic Simulation of Multibody Systems. Mechanical Engineering Series. doi:10.1007/978-1-4612-2600-0Lee, K.-M., & Arjunan, S. (1991). A three-degrees-of-freedom micromotion in-parallel actuated manipulator. IEEE Transactions on Robotics and Automation, 7(5), 634-641. doi:10.1109/70.97875Li, Y., & Xu, Q. (2007). Design and Development of a Medical Parallel Robot for Cardiopulmonary Resuscitation. IEEE/ASME Transactions on Mechatronics, 12(3), 265-273. doi:10.1109/tmech.2007.897257Merlet, J.-P. (2000). Parallel Robots. Solid Mechanics and Its Applications. doi:10.1007/978-94-010-9587-7Pierrot, F., Nabat, V., Company, O., Krut, S., & Poignet, P. (2009). Optimal Design of a 4-DOF Parallel Manipulator: From Academia to Industry. IEEE Transactions on Robotics, 25(2), 213-224. doi:10.1109/tro.2008.2011412Rosillo, N., Valera, A., Benimeli, F., Mata, V., & Valero, F. (2011). Real‐time solving of dynamic problem in industrial robots. Industrial Robot: An International Journal, 38(2), 119-129. doi:10.1108/01439911111106336Steward, D. A. (1965). A platform with 6 degrees of freedom.Proceedings of the Institution of Mechanical Engineers, Part 1, vol. 15, pp. 371–386.Valera, A., Benimeli, F., Solaz, J., De Rosario, H., Robertsson, A., Nilsson, K., … Mellado, M. (2011). A Car-Seat Example of Automated Anthropomorphic Testing of Fabrics Using Force-Controlled Robot Motions. IEEE Transactions on Automation Science and Engineering, 8(2), 280-291. doi:10.1109/tase.2010.2079931Vallés, M., Díaz-Rodríguez, M., Valera, Á., Mata, V., & Page, Á. (2012). Mechatronic Development and Dynamic Control of a 3-DOF Parallel Manipulator. Mechanics Based Design of Structures and Machines, 40(4), 434-452. doi:10.1080/15397734.2012.687292Volpe, R., & Khosla, P. (1993). A theoretical and experimental investigation of explicit force control strategies for manipulators. IEEE Transactions on Automatic Control, 38(11), 1634-1650. doi:10.1109/9.262033Zarkandi, S. (2011). Kinematics and Singularity Analysis of a Parallel Manipulator with Three Rotational and One Translational DOFs. Mechanics Based Design of Structures and Machines, 39(3), 392-407. doi:10.1080/15397734.2011.559149Zeng, G., & Hemami, A. (1997). An overview of robot force control. Robotica, 15(5), 473-482. doi:10.1017/s026357479700057

Mechatronic development and dynamic control of a 3-DOF parallel manipulator

This is an Author's Accepted Manuscript of an article published in Mechanics Based Design of Structures and Machines: An International Journal, 40:4, 434-452 [September 2012] [copyright Taylor & Francis], available online at: http://www.tandfonline.com/10.1080/15397734.2012.687292The aim of this article is to develop, from the mechatronic point of view, a low-cost parallel manipulator (PM) with 3-degrees of freedom (DOF). The robot has to be able to generate and control one translational motion (heave) and two rotary motions (rolling and pitching). Applications for this kind of parallel manipulator can be found at least in driving-motion simulation and in the biomechanical field. An open control architecture has been developed for this manipulator, which allows implementing and testing different dynamic control schemes for a PM with 3-DOF. Thus, the robot developed can be used as a test bench where control schemes can be tested. In this article, several control schemes are proposed and the tracking control responses are compared. The schemes considered are based on passivity-based control and inverse dynamic control. The control algorithm considers point-to-point control or tracking control. When the controller considers the system dynamics, an identified model has been used. The control schemes have been tested on a virtual robot and on the actual prototype. © 2012 Taylor & Francis Group, LLC.The authors wish to express their gratitude to the Plan Nacional de I+D, Comision Interministerial de Ciencia y Tecnologia (FEDER-CICYT) for the partial financing of this study under the projects DPI2009-13830-C02-01 and DPI2010-20814-C02-(01, 02). This work was also supported in part by the CDCHT-ULA Grant I-1286-11-02-B.Vallés Miquel, M.; Díaz-Rodríguez, M.; Valera Fernández, Á.; Mata Amela, V.; Page Del Pozo, AF. (2012). Mechatronic development and dynamic control of a 3-DOF parallel manipulator. Mechanics Based Design of Structures and Machines: An International Journal. 40(4):434-452. https://doi.org/10.1080/15397734.2012.687292S434452404Awtar, S., Bernard, C., Boklund, N., Master, A., Ueda, D., & Craig, K. (2002). Mechatronic design of a ball-on-plate balancing system. Mechatronics, 12(2), 217-228. doi:10.1016/s0957-4158(01)00062-9Carretero, J. A., Podhorodeski, R. P., Nahon, M. A., & Gosselin, C. M. (1999). Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator. Journal of Mechanical Design, 122(1), 17-24. doi:10.1115/1.533542Castelli, G., Ottaviano, E., & Ceccarelli, M. (2008). A Fairly General Algorithm to Evaluate Workspace Characteristics of Serial and Parallel Manipulators#. Mechanics Based Design of Structures and Machines, 36(1), 14-33. doi:10.1080/15397730701729478Chablat, D., & Wenger, P. (2003). Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide. IEEE Transactions on Robotics and Automation, 19(3), 403-410. doi:10.1109/tra.2003.810242Clavel , R. ( 1988 ). DELTA, a fast robot with parallel geometry.Proceedings of 18th International Symposium on Industrial Robot.Switzerland: Lausanne, April, pp. 91–100 .Díaz-Rodríguez, M., Mata, V., Farhat, N., & Provenzano, S. (2008). Identifiability of the Dynamic Parameters of a Class of Parallel Robots in the Presence of Measurement Noise and Modeling Discrepancy#. Mechanics Based Design of Structures and Machines, 36(4), 478-498. doi:10.1080/15397730802446501Díaz-Rodríguez, M., Mata, V., Valera, Á., & Page, Á. (2010). A methodology for dynamic parameters identification of 3-DOF parallel robots in terms of relevant parameters. Mechanism and Machine Theory, 45(9), 1337-1356. doi:10.1016/j.mechmachtheory.2010.04.007García de Jalón, J., & Bayo, E. (1994). Kinematic and Dynamic Simulation of Multibody Systems. Mechanical Engineering Series. doi:10.1007/978-1-4612-2600-0Gough , V. E. , Whitehall , S. G. ( 1962 ). Universal tire test machine.Proceedings of 9th International Technical Congress FISITA, London, pp. 117–137 .Sung Kim, H., & Tsai, L.-W. (2003). Kinematic Synthesis of a Spatial 3-RPS Parallel Manipulator. Journal of Mechanical Design, 125(1), 92-97. doi:10.1115/1.1539505Lee, K.-M., & Shah, D. K. (1988). Kinematic analysis of a three-degrees-of-freedom in-parallel actuated manipulator. IEEE Journal on Robotics and Automation, 4(3), 354-360. doi:10.1109/56.796Li, Y., & Xu, Q. (2007). Design and Development of a Medical Parallel Robot for Cardiopulmonary Resuscitation. IEEE/ASME Transactions on Mechatronics, 12(3), 265-273. doi:10.1109/tmech.2007.897257Merlet, J.-P. (2000). Parallel Robots. Solid Mechanics and Its Applications. doi:10.1007/978-94-010-9587-7Merlet , J. P. ( 2002 ). Optimal design for the micro parallel robot MIPS.Proceedings IEEE International Conference on Robotics and Automation, Washington, DC, pp. 1149–1154 .Ortega, R., & Spong, M. W. (1989). Adaptive motion control of rigid robots: A tutorial. Automatica, 25(6), 877-888. doi:10.1016/0005-1098(89)90054-xPaccot, F., Andreff, N., & Martinet, P. (2009). A Review on the Dynamic Control of Parallel Kinematic Machines: Theory and Experiments. The International Journal of Robotics Research, 28(3), 395-416. doi:10.1177/0278364908096236Rosillo, N., Valera, A., Benimeli, F., Mata, V., & Valero, F. (2011). Real‐time solving of dynamic problem in industrial robots. Industrial Robot: An International Journal, 38(2), 119-129. doi:10.1108/01439911111106336Stewart , D. A. ( 1965 ). A platform with 6 degree of freedom.Proceedings of the Institution of Mechanical Engineers.Part 1 15:371–386 .Syrseloudis , C. E. , Emiris , I. Z. ( 2008 ). A parallel robot for ankle rehabilitation-evaluation and its design specifications.Proceeding of 8th IEEE International Conference on BioInformatics and BioEngineering, Athens, October 1–6

Implementation of a control algorithm for the simulation of an object paletized process using a robot delta

Se implementó un robot delta controlado por medio de un micro-controlador (PSOC 5LP), el cual tiene como función enviar las ordenas a ejecutar para que el driver de motores (TB65603V2) las ejecute y de esta manera guiar la trayectoria que debe seguir el actuador final del robot, el cual tiene acoplado un electroimán que es el encargado de tomar las piezas a estivar de una banda transportadora y llevarlas hasta su destino. Esto es posible por medio de unas placas metálicas ubicadas en la parte superior de las cajas, sumado a lo anterior se tiene una interfaz en la cual se puede visualizar es estado de los motores y la cantidad de piezas trabajadas. La comunicación entre el micro-controlador y el driver de motores se hace por medio de un puerto paralelo el cual da la velocidad de respuesta del sistemaA controlled delta robot was implemented by means of a micro-controller (PSOC 5LP), which has the function of sending the orders to be executed so that the motor driver (TB65603V2) executes them and in this way guides the path to be followed by the final actuator of the robot, which has an electromagnet attached that is responsible for taking the parts to be stretched from a conveyor belt and taking them to their destination. This is possible by means of metal plates located in the upper part of the boxes, added to the above there is an interface in which it is possible to visualize the state of the motors and the quantity of pieces worked. The communication between the micro-controller and the motor driver is given to me through a parallel port which gives us the system's response spee

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 375)

This bibliography lists 212 reports, articles, and other documents recently introduced into the NASA Scientific and Technical Information System database. Subject coverage includes the following: aerospace medicine and physiology, life support systems and man/system technology, protective clothing, exobiology and extraterrestrial life, planetary biology, and flight crew behavior and performance

On the design of multi-platform parallel mechanisms

Parallel mechanisms have been examined in more and more detail over the past two decades. Parallel mechanisms are essentially the same design layout, a base, multiple legs/limbs, and a moving platform with a single end-effector to allow the mechanism to complete its desired function. Recently, several research groups have begun looking into multiple-platform parallel mechanisms and/or multiple end-effectors for parallel mechanisms. The reason for the research in this new form of parallel mechanism stems from multiple sources, such as applications that would require multiple handling points being accessed simultaneously, a more controlled gripper motion by having the jaws of the gripper being attached at different platforms, or to increasing the workload of the mechanism. The aim of the thesis is to modify the design process of parallel mechanisms so that it will support the development of a new parallel mechanism with multiple platforms capable of moving relative to each other in at least 1-DOF and to analyse the improvements made on the traditional single platform mechanism through a comparison of the power requirements for each mechanism. Throughout the thesis, a modified approach to the type synthesis of a parallel mechanism with multiple moving platforms is proposed and used to create several case study mechanisms. Additionally, this thesis presents a new series of methods for determining the workspace, inverse kinematic and dynamic models, and the integration of these systems into the design of a control system. All methods are vetted through case studies where they are judged based on the results gained from existing published data. Lastly, the concepts in this thesis are combined to produce a physical multi-platform parallel mechanism case study with the process being developed at each stage. Finally, a series of proposed topics of future research are listed along with the limitations and contributions of this work

Modeling and High Precision Motion Control of 3 DOF Parallel Delta Robot Manipulator

This Master thesis describes the CAD- Modeling of the Parallel DELTA robot, designed by Autodesk Inventor® software program. DELTA Robot is a Multi-Input Multi Output Nonlinear System (MIMO), so, PID controller and Model Predictive Controller (MPC) are implemented to improve the performance of Robot .but due to the variations in the dynamic models of each system, it is nearly impossible to conclusively determine the most appropriate controller to design. Therefore, this thesis compares the simulation results of two controllers, namely the PID and MPC respectively; on a 3 DOF Parallel DELTA robot in order to determine which controller would yield the best control performance. By comparing the simulation results for the joint angles error and the end effector trajectory error plots for the PID and MPC controllers, MPC controller gave the best results than PID controller. Then, a great contribution added at the response of DELTA robot. Because of Robot arms are highly geared; this reason let the robot to be more robust. MPC controller held the Potential to be the most likely candidate controllers to implement on the physical structure of the 3-DOF Parallel DELTA robot. But PID controller is easier in software implementation inside embedded systems as microcontrollers

Blood

This book examines both the fluid and cellular components of blood. After the introductory section, the second section presents updates on various topics in hemodynamics. Chapters in this section discuss anemia, 4D flow MRI in cardiology, cardiovascular complications of robot-assisted laparoscopic pelvic surgery, altered perfusion in multiple sclerosis, and hemodynamic laminar shear stress in oxidative homeostasis. The third section focuses on thalassemia with chapters on diagnosis and screening for thalassemia, high blood pressure in beta-thalassemia, and hepatitis C infection in thalassemia patients

Sensors for Vital Signs Monitoring

Sensor technology for monitoring vital signs is an important topic for various service applications, such as entertainment and personalization platforms and Internet of Things (IoT) systems, as well as traditional medical purposes, such as disease indication judgments and predictions. Vital signs for monitoring include respiration and heart rates, body temperature, blood pressure, oxygen saturation, electrocardiogram, blood glucose concentration, brain waves, etc. Gait and walking length can also be regarded as vital signs because they can indirectly indicate human activity and status. Sensing technologies include contact sensors such as electrocardiogram (ECG), electroencephalogram (EEG), photoplethysmogram (PPG), non-contact sensors such as ballistocardiography (BCG), and invasive/non-invasive sensors for diagnoses of variations in blood characteristics or body fluids. Radar, vision, and infrared sensors can also be useful technologies for detecting vital signs from the movement of humans or organs. Signal processing, extraction, and analysis techniques are important in industrial applications along with hardware implementation techniques. Battery management and wireless power transmission technologies, the design and optimization of low-power circuits, and systems for continuous monitoring and data collection/transmission should also be considered with sensor technologies. In addition, machine-learning-based diagnostic technology can be used for extracting meaningful information from continuous monitoring data