SpiNNaker: Fault tolerance in a power- and area- constrained large-scale neuromimetic architecture

AbstractSpiNNaker is a biologically-inspired massively-parallel computer designed to model up to a billion spiking neurons in real-time. A full-fledged implementation of a SpiNNaker system will comprise more than 105 integrated circuits (half of which are SDRAMs and half multi-core systems-on-chip). Given this scale, it is unavoidable that some components fail and, in consequence, fault-tolerance is a foundation of the system design. Although the target application can tolerate a certain, low level of failures, important efforts have been devoted to incorporate different techniques for fault tolerance. This paper is devoted to discussing how hardware and software mechanisms collaborate to make SpiNNaker operate properly even in the very likely scenario of component failures and how it can tolerate system-degradation levels well above those expected

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Energy Management via PI Control for Data Parallel Applications with Throughput Constraints

International audienceThis paper presents a new proportional-integral (PI) controller that sets the operating point of computing tiles in a system on chip (SoC). We address data-parallel applications with throughput constraints. The controller settings are investigated for application configurations with different QoS levels and different buffer sizes. The control method is evaluated on a test chip with four tiles executing a realistic HMAX object recognition application. Experimental results suggest that the proposed controller outperforms the state-of-the-art results: it attains, on average, 25% less number of frequency switches and has slightly higher energy savings. The reduction in number of frequency switches is important because it decreases the involved overhead. In addition, the PI controller meets the throughput constraint in cases where other approaches fail

Compiler-directed energy reduction using dynamic voltage scaling and voltage Islands for embedded systems

Cataloged from PDF version of article.Addressing power and energy consumption related issues early in the system design flow ensures good design and minimizes iterations for faster turnaround time. In particular, optimizations at software level, e.g., those supported by compilers, are very important for minimizing energy consumption of embedded applications. Recent research demonstrates that voltage islands provide the flexibility to reduce power by selectively shutting down the different regions of the chip and/or running the select parts of the chip at different voltage/frequency levels. As against most of the prior work on voltage islands that mainly focused on the architecture design and IP placement related issues, this paper studies the necessary software compiler support for voltage islands. Specifically, we focus on an embedded multiprocessor architecture that supports both voltage islands and control domains within these islands, and determine how an optimizing compiler can automatically map an embedded application onto this architecture. Such an automated support is critical since it is unrealistic to expect an application programmer to reach a good mapping correlating multiple factors such as performance and energy at the same time. Our experiments with the proposed compiler support show that our approach is very effective in reducing energy consumption. The experiments also show that the energy savings we achieve are consistent across a wide range of values of our major simulation parameters

05141 Abstracts Collection -- Power-aware Computing Systems

From 03.04.05 to 08.04.05, the Dagstuhl Seminar 05141 ``Power-aware Computing Systems\u27\u27 was held in the International Conference and Research Center (IBFI), Schloss Dagstuhl. During the seminar, several participants presented their current research, and ongoing work and discussed open problems. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are collected in this paper. The first section describes the seminar topics and goals. Links to extended abstracts or full papers are provided, if available

A dynamic power-aware partitioner with task migration for multicore embedded systems

Nowadays, a key design issue in embedded systems is how to reduce the power consumption, since batteries have a limited energy budget. For this purpose, several techniques such as Dynamic Voltage Scaling (DVS) or task migration can be used. DVS allows reducing power by selecting the optimal voltage supply, while task migration achieves this effect by balancing the workload among cores. This paper first analyzes the impact on energy due to task migration in multicore embedded systems with DVS capability and using the well-known Worst Fit (WF) partitioning heuristic. To reduce overhead, migrations are only performed at the time that a task arrives to and/or leaves the system and, in such a case, only one migration is allowed. The huge potential on energy saving due to task migration, leads us to propose a new dynamic partitioner, namely DP, that migrates tasks in a more efficient way than typical partitioners. Unlike WF, the proposed algorithm examines which is the optimal target core before allowing a migration. Experimental results show that DP can improve energy consumption in a factor up to 2.74 over the typical WF algorithm. © 2011 Springer-Verlag.This work was supported by Spanish CICYT under Grant TIN2009-14475-C04-01, and by Consolider-Ingenio under Grant CSD2006-00046.March Cabrelles, JL.; Sahuquillo Borrás, J.; Petit Martí, SV.; Hassan Mohamed, H.; Duato Marín, JF. (2011). A dynamic power-aware partitioner with task migration for multicore embedded systems. En Euro-Par 2011 Parallel Processing. Springer Verlag (Germany). 2011(6852):218-229. https://doi.org/10.1007/978-3-642-23400-2_21S21822920116852AlEnawy, T.A., Aydin, H.: Energy-Aware Task Allocation for Rate Monotonic Scheduling. In: Proceedings of the 11th Real Time on Embedded Technology and Applications Symposium, March 7-10, pp. 213–223. IEEE Computer Society, San Francisco (2005)Aydin, H., Yang, Q.: Energy-Aware Partitioning for Multiprocessor Real-Time Systems. In: Proceedings of the 17th International Parallel and Distributed Processing Symposium, Workshop on Parallel and Distributed Real-Time Systems, April 22-26, p. 113. IEEE Computer Society, Nice (2003)Baker, T.P.: An Analysis of EDF schedulability on a multiprocessor. IEEE Transactions on Parallel and Distributed Systems 16(8), 760–768 (2005)Brandenburg, B.B., Calandrino, J.M., Anderson, J.H.: On the Scalability of Real-Time Scheduling Algorithms on Multicore Platforms: A Case Study. In: Proceedings of the 29th Real-Time Systems Symposium, November 30-December 3, pp. 157–169. IEEE Computer Society, Barcelona (2008)Brião, E., Barcelos, D., Wronski, F., Wagner, F.R.: Impact of Task Migration in NoC-based MPSoCs for Soft Real-time Applications. In: Proceedings of the International Conference on VLSI, October 15-17, pp. 296–299. IEEE Computer Society, Atlanta (2007)Cazorla, F., Knijnenburg, P., Sakellariou, R., Fernández, E., Ramirez, A., Valero, M.: Predictable Performance in SMT Processors: Synergy between the OS and SMTs. IEEE Transactions on Computers 55(7), 785–799 (2006)Donald, J., Martonosi, M.: Techniques for Multicore Thermal Management: Classification and New Exploration. In: Proceedings of the 33rd Annual International Symposium on Computer Architecture, June 17-21, pp. 78–88. IEEE Computer Society, Boston (2006)El-Haj-Mahmoud, A., AL-Zawawi, A., Anantaraman, A., Rotenberg, E.: Virtual Multiprocessor: An Analyzable, High-Performance Architecture for Real-Time Computing. In: Proceedings of the International Conference on Compilers, Architectures and Synthesis for Embedded Systems, September 24-27, pp. 213–224. ACM Press, San Francisco (2005)Hung, C., Chen, J., Kuo, T.: Energy-Efficient Real-Time Task Scheduling for a DVS System with a Non-DVS Processing Element. In: Proceedings of the 27th Real-Time Systems Symposium, December 5-8, pp. 303–312. IEEE Computer Society, Rio de Janeiro (2006)Kalla, R., Sinharoy, B., Tendler, J.M.: IBM Power5 Chip: A Dual-Core Multithreaded Processor. IEEE Micro 24(2), 40–47 (2004)Kato, S., Yamasaki, N.: Global EDF-based Scheduling with Efficient Priority Promotion. In: Proceedings of the 14th International Conference on Embedded and Real-Time Computing Systems and Applications, August 25-27, pp. 197–206. IEEE Computer Society, Kaohisung (2008)Malardalen Real-Time Research Center, Vasteras, Sweden: WCET Analysis Project. WCET Benchmark Programs (2006), [Online], http://www.mrtc.mdh.se/projects/wcet/March, J., Sahuquillo, J., Hassan, H., Petit, S., Duato, J.: A New Energy-Aware Dynamic Task Set Partitioning Algorithm for Soft and Hard Embedded Real-Time Systems. To be published on The Computer Journal (2011)McNairy, C., Bhatia, R.: Montecito: A Dual-Core, Dual-Thread Itanium Processor. IEEE Micro 25(2), 10–20 (2005)Seo, E., Jeong, J., Park, S., Lee, J.: Energy Efficient Scheduling of Real-Time Tasks on Multicore Processors. IEEE Transactions on Parallel and Distributed Systems 19(11), 1540–1552 (2008)Shah, A.: Arm plans to add multithreading to chip design. ITworld (2010), [Online], http://www.itworld.com/hardware/122383/arm-plans-add-multithreading-chip-designUbal, R., Sahuquillo, J., Petit, S., López, P.: Multi2Sim: A Simulation Framework to Evaluate Multicore-Multithreaded Processors. In: Proceedings of the 19th International Symposium on Computer Architecture and High Performance Computing, October 24-27, pp. 62–68. IEEE Computer Society, Gramado (2007)Watanabe, R., Kondo, M., Imai, M., Nakamura, H., Nanya, T.: Task Scheduling under Performance Constraints for Reducing the Energy Consumption of the GALS Multi-Processor SoC. In: Proceedings of the Design Automation and Test in Europe, April 16-20, pp. 797–802. ACM, Nice (2007)Wei, Y., Yang, C., Kuo, T., Hung, S.: Energy-Efficient Real-Time Scheduling of Multimedia Tasks on Multi-Core Processors. In: Proceedings of the 25th Symposium on Applied Computing, March 22-26, pp. 258–262. ACM, Sierre (2010)Wu, Q., Martonosi, M., Clark, D.W., Reddi, V.J., Connors, D., Wu, Y., Lee, J., Brooks, D.: A Dynamic Compilation Framework for Controlling Microprocessor Energy and Performance. In: Proceedings of the 38th Annual IEEE/ACM International Symposium on Microarchitecture, November 12-16, pp. 271–282. IEEE Computer Society, Barcelona (2005)Zheng, L.: A Task Migration Constrained Energy-Efficient Scheduling Algorithm for Multiprocessor Real-time Systems. In: Proceedings of the International Conference on Wireless Communications, Networking and Mobile Computing, September 21-25, pp. 3055–3058. IEEE Computer Society, Shanghai (2007

Low-Power Embedded Design Solutions and Low-Latency On-Chip Interconnect Architecture for System-On-Chip Design

This dissertation presents three design solutions to support several key system-on-chip (SoC) issues to achieve low-power and high performance. These are: 1) joint source and channel decoding (JSCD) schemes for low-power SoCs used in portable multimedia systems, 2) efficient on-chip interconnect architecture for massive multimedia data streaming on multiprocessor SoCs (MPSoCs), and 3) data processing architecture for low-power SoCs in distributed sensor network (DSS) systems and its implementation. The first part includes a low-power embedded low density parity check code (LDPC) - H.264 joint decoding architecture to lower the baseband energy consumption of a channel decoder using joint source decoding and dynamic voltage and frequency scaling (DVFS). A low-power multiple-input multiple-output (MIMO) and H.264 video joint detector/decoder design that minimizes energy for portable, wireless embedded systems is also designed. In the second part, a link-level quality of service (QoS) scheme using unequal error protection (UEP) for low-power network-on-chip (NoC) and low latency on-chip network designs for MPSoCs is proposed. This part contains WaveSync, a low-latency focused network-on-chip architecture for globally-asynchronous locally-synchronous (GALS) designs and a simultaneous dual-path routing (SDPR) scheme utilizing path diversity present in typical mesh topology network-on-chips. SDPR is akin to having a higher link width but without the significant hardware overhead associated with simple bus width scaling. The last part shows data processing unit designs for embedded SoCs. We propose a data processing and control logic design for a new radiation detection sensor system generating data at or above Peta-bits-per-second level. Implementation results show that the intended clock rate is achieved within the power target of less than 200mW. We also present a digital signal processing (DSP) accelerator supporting configurable MAC, FFT, FIR, and 3-D cross product operations for embedded SoCs. It consumes 12.35mW along with 0.167mm2 area at 333MHz