Neural-Network Vector Controller for Permanent-Magnet Synchronous Motor Drives: Simulated and Hardware-Validated Results

This paper focuses on current control in a permanentmagnet synchronous motor (PMSM). The paper has two main objectives: The first objective is to develop a neural-network (NN) vector controller to overcome the decoupling inaccuracy problem associated with conventional PI-based vector-control methods. The NN is developed using the full dynamic equation of a PMSM, and trained to implement optimal control based on approximate dynamic programming. The second objective is to evaluate the robust and adaptive performance of the NN controller against that of the conventional standard vector controller under motor parameter variation and dynamic control conditions by (a) simulating the behavior of a PMSM typically used in realistic electric vehicle applications and (b) building an experimental system for hardware validation as well as combined hardware and simulation evaluation. The results demonstrate that the NN controller outperforms conventional vector controllers in both simulation and hardware implementation

Magnetic Modelling of Synchronous Reluctance and Internal Permanent Magnet Motors Using Radial Basis Function Networks

The general trend toward more intelligent energy-aware ac drives is driving the development of new motor topologies and advanced model-based control techniques. Among the candidates, pure reluctance and anisotropic permanent magnet motors are gaining popularity, despite their complex structure. The availability of accurate mathematical models that describe these motors is essential to the design of any model-based advanced control. This paper focuses on the relations between currents and flux linkages, which are obtained through innovative radial basis function neural networks. These special drive-oriented neural networks take as inputs the motor voltages and currents, returning as output the motor flux linkages, inclusive of any nonlinearity and cross-coupling effect. The theoretical foundations of the radial basis function networks, the design hints, and a commented series of experimental results on a real laboratory prototype are included in this paper. The simple structure of the neural network fits for implementation on standard drives. The online training and tracking will be the next steps in field programmable gate array based control systems

Axial flux permanent magnet motor design and optimisation by using artificial neural networks

In this study, the necessary steps for the design of axial flux permanent magnet motors are shown. The design and analysis of the engine were carried out based on ANSYS Maxwell program. The design parameters of the ANSYS Maxwell program and the artificial neural network system were established in MATLAB, and the most efficient design parameters were found with the trained neural network. The results of the Maxwell program were compared with the results of the artificial neural networks, and optimal working design parameters were found. The most efficient design parameters were submitted to the ANSYS Maxwell 3D design, the cogging torque was subsequently examined and design studies were carried out to reduce the cogging torque.peer-reviewe

EFFICIENCY OPTIMIZATION OF AN OPENLOOP CONTROLLED PERMANENT MAGNET SYNCHRONOUS MOTOR DRIVE USING ADAPTIVE NEURAL NETWORKS

When a Permanent Magnet Synchronous Machine (PMSM) is utilized for applications where high dynamic performance is not a requirement, a simple open loop control strategy can be used to control them. PMSMs however are prone to instability when operated open loop in a variable speed drive, particularly at mid-frequencies/speeds. This paper presents an open-loop control strategy based on a direct adaptive neural network controller is developed for efficiency optimization of open-loop controlled PMSM drive. Stability constraints of the drive system which was previously reported are used to maintain both stable and highly efficient operation of the drive system. The adopted neural network can be viewed as a method for nonlinear adaptive system identification, relying on pattern recognition of stability limits and maximum obtainable efficiency. Results from computer simulation show that a stable and highly efficient operation can be maintained for the drive system under study irrespective of load and supply variations. The obtained results are also found in correlation with previously reported experiments and observations

Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications

An inverter is essential for the interfacing of photovoltaic panels with the AC network. There are many possible inverter topologies and inverter switching schemes and each one will have its own relative advantages and disadvantages. Efficiency and output current distortion are two important factors governing the choice of inverter system. In this paper, it is argued that current controlled inverters offer significant advantages from the point of view of minimisation of current distortion. Two inverter switching strategies are explored in detail. These are the unipolar current controlled inverter and the bipolar current controlled inverter. With respect to low frequency distortion, previously published works provide theoretical arguments in favour of bipolar switching. On the other hand it has also been argued that the unipolar switched inverter offers reduced switching losses and generates less EMI. On efficiency grounds, it appears that the unipolar switched inverter has an advantage. However, experimental results presented in this paper show that the level of low frequency current distortion in the unipolar switched inverter is such that it can only comply with Australian Standard 4777.2 above a minimum output current. On the other hand it is shown that at the same current levels bipolar switching results in reduced low frequency harmonics

Comparison between unipolar and bipolar single phase grid-connected inverters for PV applications

An inverter is essential for the interfacing of photovoltaic panels with the AC network. There are many possible inverter topologies and inverter switching schemes and each one will have its own relative advantages and disadvantages. Efficiency and output current distortion are two important factors governing the choice of inverter system. In this paper, it is argued that current controlled inverters offer significant advantages from the point of view of minimisation of current distortion. Two inverter switching strategies are explored in detail. These are the unipolar current controlled inverter and the bipolar current controlled inverter. With respect to low frequency distortion, previously published works provide theoretical arguments in favour of bipolar switching. On the other hand it has also been argued that the unipolar switched inverter offers reduced switching losses and generates less EMI. On efficiency grounds, it appears that the unipolar switched inverter has an advantage. However, experimental results presented in this paper show that the level of low frequency current distortion in the unipolar switched inverter is such that it can only comply with Australian Standard 4777.2 above a minimum output current. On the other hand it is shown that at the same current levels bipolar switching results in reduced low frequency harmonics

Torque ripple minimization in non-sinusoidal synchronous reluctance motors based on artificial neural networks

This paper proposes a new method based on Artificial Neural Networks for reducing the torque ripple in a non-sinusoidal Synchronous Reluctance Motor. The Lagrange optimization method is used to solve the problem of calculating optimal currents in the d-q frame. A neural control scheme is then proposed as an adaptive solution to derive the optimal stator currents giving a constant electromagnetic torque and minimizing the ohmic losses. Thanks to the online learning capacity of neural networks, the optimal currents can be obtained online in real time. With this neural control, each machine’s parameters estimation errors and current controller errors can be compensated. Simulation and experimental results are presented which confirm the validity of the proposed method.Bourse de l'Ambassade de France au Vietna

Guiding paving block porous for blind people

Porous concrete is a simple form of lightweight concrete made by eliminating the use of fine aggregates (sand). That is a mixture of cement, water and coarse aggregate. Use of the guiding paving block porous for blind people is one of the efforts that will be made to overcome the inundation due to water spills from sufficiently high rainfall, providing comfort and safety for users so as not to slip easily due to slippery road surfaces, that will be used must have a measurable value of permeability and porosity to optimize the function of using porous concrete. Guiding paving block porous for blind people are very economical and have a great advantage in absorbing water so the surface is always dry, and can reduce accidents due to slippery roads. Another advantage is that the product is environmentally friendly with handmade, designed using a mixture of plastic bottle waste material can be made apart from the manufacturing process in various shapes and various colors. From the test results it has a strength of 10-15 mpa in the precast age of 28 days with a water absorption capability of up to 10L / m2

Application of Optimal Switching Using Adaptive Dynamic Programming in Power Electronics

In this dissertation, optimal switching in switched systems using adaptive dynamic programming (ADP) is presented. Two applications in power electronics, namely single-phase inverter control and permanent magnet synchronous motor (PMSM) control are studied using ADP. In both applications, the objective of the control problem is to design an optimal switching controller, which is also relatively robust to parameter uncertainties and disturbances in the system. An inverter is used to convert the direct current (DC) voltage to an alternating current (AC) voltage. The control scheme of the single-phase inverter uses a single function approximator, called critic, to evaluate the optimal cost and determine the optimal switching. After offline training of the critic, which is a function of system states and elapsed time, the resulting optimal weights are used in online control, to get a smooth output AC voltage in a feedback form. Simulations show the desirable performance of this controller with linear and nonlinear load and its relative robustness to parameter uncertainty and disturbances. Furthermore, the proposed controller is upgraded so that the inverter is suitable for single-phase variable frequency drives. Finally, as one of the few studies in the field of adaptive dynamic programming (ADP), the proposed controllers are implemented on a physical prototype to show the performance in practice. The torque control of PMSMs has become an interesting topic recently. A new approach based on ADP is proposed to control the torque, and consequently the speed of a PMSM when an unknown load torque is applied on it. The proposed controller achieves a fast transient response, low ripples and small steady-state error. The control algorithm uses two neural networks, called critic and actor. The former is utilized to evaluate the cost and the latter is used to generate control signals. The training is done once offline and the calculated optimal weights of actor network are used in online control to achieve fast and accurate torque control of PMSMs. This algorithm is compared with field-oriented control (FOC) and direct torque control based on space vector modulation (DTC-SVM). Simulations and experimental results show that the proposed algorithm provides desirable results under both accurate and uncertain modeled dynamics

Torque ripples minimization of DTC IPMSM drive for the EV propulsion system using a neural network

This paper deals with a Direct Torque Control (DTC) of an Interior Permanent Magnet Synchronous Motor (IPMSM) for the Electric Vehicle (EV) propulsion system using a Neural Network (NN). The Conventional DTC with optimized switching lookup table and three level torque controller generates relatively large torque ripples in an electric vehicle motor drive. For reducing the torque ripples, a three level torque controller is hereby replaced by the five level torque controller. Furthermore, the switching lookup table of the five level torque controller based DTC is replaced with a Neural Network. These DTC schemes of an IPMSM drive are simulated using MATLAB/SIMULINK. The simulated results are compared with the conventional DTC and it is found that the ripples in the torque, as well as in the stator current, are reduced drastically