Performance Improvement of Low-Cost Iterative Learning-Based Fuzzy Control Systems for Tower Crane Systems

This paper is dedicated to the memory of Prof. Ioan Dzitac, one of the fathers of this journal and its founding Editor-in-Chief till 2021. The paper addresses the performance improvement of three Single Input-Single Output (SISO) fuzzy control systems that control separately the positions of interest of tower crane systems, namely the cart position, the arm angular position and the payload position. Three separate low-cost SISO fuzzy controllers are employed in terms of first order discrete-time intelligent Proportional-Integral (PI) controllers with Takagi-Sugeno-Kang Proportional-Derivative (PD) fuzzy terms. Iterative Learning Control (ILC) system structures with PD learning functions are involved in the current iteration SISO ILC structures. Optimization problems are defined in order to tune the parameters of the learning functions. The objective functions are defined as the sums of squared control errors, and they are solved in the iteration domain using the recent metaheuristic Slime Mould Algorithm (SMA). The experimental results prove the performance improvement of the SISO control systems after ten iterations of SMA

Fuzzy control turns 50: 10 years later

In 2015, we celebrate the 50th anniversary of Fuzzy Sets, ten years after the main milestones regarding its applications in fuzzy control in their 40th birthday were reviewed in FSS, see [1]. Ten years is at the same time a long period and short time thinking to the inner dynamics of research. This paper, presented for these 50 years of Fuzzy Sets is taking into account both thoughts. A first part presents a quick recap of the history of fuzzy control: from model-free design, based on human reasoning to quasi-LPV (Linear Parameter Varying) model-based control design via some milestones, and key applications. The second part shows where we arrived and what the improvements are since the milestone of the first 40 years. A last part is devoted to discussion and possible future research topics.Guerra, T.; Sala, A.; Tanaka, K. (2015). Fuzzy control turns 50: 10 years later. Fuzzy Sets and Systems. 281:162-182. doi:10.1016/j.fss.2015.05.005S16218228

Design Nonlinear Model Reference with Fuzzy Controller for Nonlinear SISO Second Order Systems

Model reference controller is considering as one of the most useful controller to specific performance of systems where the desired output is produced for a given input. This system used the difference between the outputs of the plant and the desired model by comparing them to produce the signals of the control. This paper focus on design a model reference controller (MRC) combined with (type-1 and interval type-2) fuzzy control scheme for single input-single output (SISO) systems under uncertainty and external disturbance. The model reference controller is designed firstly without fuzzy scheme based on an optimal desired model and Lyapunov stability theory. Then a (type-1 and Interval type-2) fuzzy controller Takagi-Sugeno type is combine with the suggested MRC in order to enhance the performer of it, the common parts between the two fuzzy systems such as: fuzzifier, inference engine, fuzzy rule-base and defuzzifier are illustrated. In this paper the proposed controller is applied to controla (SISO) inverted pendulum sustem and the Matlab R2015 software is used to carry out two simulation cases for the overall controlled scheme. The obtained results for the two cases show that the proposed MRC with both fuzzy control schemes have acceptable performance, but it have better performance with the interval type-2 fuzzy scheme

Parallel Distributed Compensation for Voltage Controlled Active Magnetic Bearing System using Integral Fuzzy Model

Parallel Distributed Compensation (PDC) for current-controlled Active Magnetic Bearing System (AMBS) has been quite effective in recent years. However, this method does not take into account the dynamics associated with the electromagnet. This limits the method to smaller scale applications where the electromagnet dynamics can be neglected. Voltage-controlled AMBS is used to overcome this limitation but this comes with serious challenges such as complex mathematical modelling and higher order system control. In this work, a PDC with integral part is proposed for position and input tracking control of voltage-controlled AMBS. PDC method is based on nonlinear Takagi-Sugeno (T-S) fuzzy model. It is shown that the proposed method outperforms the conventional fuzzy PDC. It stabilizes the bearing shaft at any chosen operating point and tracks any chosen smooth trajectory within the air gap with a high external disturbance rejection capability

Stable Hybrid Fuzzy Controller-based Architecture for Robotic Telesurgery Systems

Robotic surgery and remotely controlled teleoperational systems are on the rise. However, serious limitations arise on both the hardware and software side when traditional modeling and control approaches are taken. These limitations include the incomplete modeling of robot dynamics, tool–tissue interaction, human– machine interfaces and the communication channel. Furthermore, the inherent latency of long-distance signal transmission may endanger the stability of a robot controller. All of these factors contribute to the very limited deployment of real robotic telesurgery. This paper describes a stable hybrid fuzzy controller-based architecture that is capable of handling the basic challenges. The aim is to establish high fidelity telepresence systems for medical applications by easily handled modern control solution

Fuzzy Model-Reference Adaptive Control Method For An Underwater Robotic Manipulator

Pengendali robotik dalam air (URM) adalah berbeza jika dibandingkan dengan pengendali robotik biasa atau yg berada di permukaan. Dinamiknya mempunyai ketidakpastian yang besar bergantung kepada daya apungan, daya yang dihasilkan oleh jisim tambahan/momen luas kedua dan daya geseran. Tambahan lagi, ia juga dipengaruhi oleh gangguan luaran yang penting seperti arus dan ombak. The underwater robotic manipulators (URMs) are different with the ordinary or landbased robotic manipulators. Its dynamics have large uncertainties owing to the buoyancy, force induced by the added mass/moment of inertia and the drag force. Moreover, they are also affected by the crucial external disturbances such as currents and waves