A survey on OFDM-based elastic core optical networking

Orthogonal frequency-division multiplexing (OFDM) is a modulation technology that has been widely adopted in many new and emerging broadband wireless and wireline communication systems. Due to its capability to transmit a high-speed data stream using multiple spectral-overlapped lower-speed subcarriers, OFDM technology offers superior advantages of high spectrum efficiency, robustness against inter-carrier and inter-symbol interference, adaptability to server channel conditions, etc. In recent years, there have been intensive studies on optical OFDM (O-OFDM) transmission technologies, and it is considered a promising technology for future ultra-high-speed optical transmission. Based on O-OFDM technology, a novel elastic optical network architecture with immense flexibility and scalability in spectrum allocation and data rate accommodation could be built to support diverse services and the rapid growth of Internet traffic in the future. In this paper, we present a comprehensive survey on OFDM-based elastic optical network technologies, including basic principles of OFDM, O-OFDM technologies, the architectures of OFDM-based elastic core optical networks, and related key enabling technologies. The main advantages and issues of OFDM-based elastic core optical networks that are under research are also discussed

Analysis of system capacity and spectral efficiency of fixed-grid network

In this article, the performance of a fixed grid network is examined for various modulation formats to estimate the system's capacity and spectral efficiency. The optical In-phase Quadrature Modulator structure is used to build a fixed grid network modulation, and the homodyne detection approach is used for the receiver. Data multiplexing is accomplished using the Polarization Division Multiplexed technology. 100 Gbps, 150 Gbps, and 200 Gbps data rates are transmitted under these circumstances utilizing various modulation formats. Various pre-processing and signal recovery steps are explained by using modern digital signal processing systems. The achieved spectrum efficiencies for PM-QPSK, PM-8 QAM, and PM-16 QAM, respectively, were 2, 3, and 4 bits/s/Hz. Different modulation like PM-QPSK, PM-8-QAM, and PM-16-QAM each has system capacities of 8-9, 12-13.5, and 16-18 Tbps and it reaches transmission distances of 3000, 1300, and 700 kilometers with acceptable Bit Error Rate less than equal to 2*10-3 respectively. Peak optical power for received signal detection and full width at half maximum is noted for the different modulations under a fixed grind network

Tecnologias coerentes para redes ópticas flexíveis

Next-generation networks enable a broad range of innovative services with the best delivery by utilizing very dense wired/wireless networks. However, the development of future networks will require several breakthroughs in optical networks such as high-performance optical transceivers to support a very-high capacity optical network as well as optimization of the network concept, ensuring a dramatic reduction of the cost per bit. At the same time, all of the optical network segments (metro, access, long-haul) need new technology options to support high capacity, spectral efficiency and data-rate flexibility. Coherent detection offers an opportunity by providing very high sensitivity and supporting high spectral efficiency. Coherent technology can still be combined with polarization multiplexing. Despite the increased cost and complexity, the migration to dual-polarization coherent transceivers must be considered, as it enables to double the spectral efficiency. These dual-polarization systems require an additional digital signal processing (DSP) subsystem for polarization demultiplexing. This work seeks to provide and characterize cost-effective novel coherent transceivers for the development of new generation practical, flexible and high capacity transceivers for optical metro-access and data center interconnects. In this regard, different polarization demultiplexing (PolDemux) algorithms, as well as adaptive Stokes will be considered. Furthermore, low complexity and modulation format-agnostic DSP techniques based on adaptive Stokes PolDemux for flexible and customizable optical coherent systems will be proposed. On this subject, the performance of the adaptive Stokes algorithm in an ultra-dense wavelength division multiplexing (U-DWDM) system will be experimentally evaluated, in offline and real-time operations over a hybrid optical-wireless link. In addition, the efficiency of this PolDemux algorithm in a flexible optical metro link based on Nyquist pulse shaping U-DWDM system and hybrid optical signals will be assessed. Moreover, it is of great importance to find a transmission technology that enables to apply the Stokes PolDemux for long-haul transmission systems and data center interconnects. In this work, it is also proposed a solution based on the use of digital multi-subcarrier multiplexing, which improve the performance of long-haul optical systems, without increasing substantially, their complexity and cost.As redes de telecomunicações futuras permitirão uma ampla gama de serviços inovadores e com melhor desempenho. No entanto, o desenvolvimento das futuras redes implicará vários avanços nas redes de fibra ótica, como transcetores óticos de alto desempenho capazes de suportar ligações de muito elevada capacidade, e a otimização da estrutura da rede, permitindo uma redução drástica do custo por bit transportado. Simultaneamente, todos os segmentos de rede ótica (metropolitanas, acesso e longo alcance) necessitam de novas opções tecnológicas para suportar uma maior capacidade, maior eficiência espetral e flexibilidade. Neste contexto, a deteção coerente surge como uma oportunidade, fornecendo alta sensibilidade e elevada eficiência espetral. A tecnologia de deteção coerente pode ainda ser associada à multiplexação na polarização. Apesar de um potencial aumento ao nível do custo e da complexidade, a migração para transcetores coerentes de dupla polarização deve ser ponderada, pois permite duplicar a eficiência espetral. Esses sistemas de dupla polarização requerem um subsistema de processamento digital de sinal (DSP) adicional para desmultiplexagem da polarização. Este trabalho procura fornecer e caracterizar novos transcetores coerentes de baixo custo para o desenvolvimento de uma nova geração de transcetores mais práticos, flexíveis e de elevada capacidade, para interconexões óticas ao nível das futuras redes de acesso e metro. Assim, serão analisados diferentes algoritmos para a desmultiplexagem da polarização, incluindo uma abordagem adaptativa baseada no espaço de Stokes. Além disso, são propostas técnicas de DSP independentes do formato de modulação e de baixa complexidade baseadas na desmultiplexagem de Stokes adaptativa para sistemas óticos coerentes flexíveis. Neste contexto, o desempenho do algoritmo adaptativo de desmultiplexagem na polarização baseado no espaço de Stokes é avaliado experimentalmente num sistema U-DWDM, tanto em análises off-line como em tempo real, considerando um percurso ótico hibrido que combina um sistema de transmissão suportado por fibra e outro em espaço livre. Foi ainda analisada a eficiência do algoritmo de desmultiplexagem na polarização numa rede ótica de acesso flexível U-DWDM com formatação de pulso do tipo Nyquist. Neste trabalho foi ainda analisada a aplicação da técnica de desmultiplexagem na polarização baseada no espaço de Stokes para sistemas de longo alcance. Assim, foi proposta uma solução de aplicação baseada no uso da multiplexagem digital de múltiplas sub-portadoras, tendo-se demonstrado uma melhoria na eficiência do desempenho dos sistemas óticos de longo alcance, sem aumentar significativamente a respetiva complexidade e custo.Programa Doutoral em Engenharia Eletrotécnic

High Dimensional Modulation and MIMO Techniques for Access Networks

Exploration of advanced modulation formats and multiplexing techniques for next generation optical access networks are of interest as promising solutions for delivering multiple services to end-users. This thesis addresses this from two different angles: high dimensionality carrierless amplitudephase (CAP) and multiple-input multiple-output (MIMO) radio-over-fiber (RoF) systems. High dimensionality CAP modulation has been investigated in optical fiber systems. In this project we conducted the first experimental demonstration of 3 and 4 dimensional CAP with bit rates up to 10 Gb/s. These results indicate the potentiality of supporting multiple users with converged services. At the same time, orthogonal division multiple access (ODMA) systems for multiple possible dimensions of CAP modulation has been demonstrated for user and service allocation in wavelength division multiplexing (WDM) optical access network. 2 x 2 MIMO RoF employing orthogonal frequency division multiplexing (OFDM) with 5.6 GHz RoF signaling over all-vertical cavity surface emitting lasers (VCSEL) WDM passive optical networks (PONs). We have employed polarization division multiplexing (PDM) to further increase the capacity per wavelength of the femto-cell network. Bit rate up to 1.59 Gbps with fiber-wireless transmission over 1 m air distance is demonstrated. The results presented in this thesis demonstrate the feasibility of high dimensionality CAP in increasing the number of dimensions and their potentially to be utilized for multiple service allocation to different users. MIMO multiplexing techniques with OFDM provides the scalability in increasing spectral effciency and bit rates for RoF systems. High dimensional CAP and MIMO multiplexing techniques are two promising solutions for supporting wired and hybrid wired-wireless access networks

Transmission optique longue distance avec le format MB-OFDM cohérent à 100 Gbps

Today the 100 Gbps coherent dual polarization quadrature phase shift keying (Co-DP-QPSK) is standardized as the industrial solution for long-haul WDM transmission. Another alternative format to DP-QPSK that permits also to reach a data rate of 100 Gbps and beyond is the coherent orthogonal frequency division multiplexing (OFDM) format. However a doubt exists over the ability of OFDM to be as efficient as QPSK for long-haul WDM transmission due to its supposed higher sensitivity to nonlinear effects . In this thesis, we have investigated the potential of Co-DP-OFDM for 100 Gbps WDM transport. The digital signal processing algorithms are detailed as well as the various experimental set-ups required to carry out and validate the 100 Gbps transceiver. We also present the transmission results obtained with several configurations. In one of these configurations, the 100 Gbps Co-DP-OFDM channel is multiplexed with forty 100 Gbps DP-QPSK channels and all these channels are transmitted over 1000 km of DCF-free G.652 fiber, while in another configuration, the Co-DP-OFDM and Co-DP-QPSK channels are combined with seventy eight 10 Gbps NRZ-OOK channels and transmitted over 1000 km of dispersion managed G.652 fiber line. We have demonstrated that OFDM and QPSK have nearly the same performance after a transmission over 1000 km, and also we have demonstrated that the transmission of these two formats over legacy fiber infrastructure is possible under the condition of decreasing by 5 dB the 10 Gbps NRZ-OOK channel power with respect to the 100 Gbps channels. The results presented in this thesis are very valuable when considering the next generation of 400 Gbps or 1 Tbps for WDM systems.Aujourd'hui, le format « Quadrature Phase Shift Keying » avec multiplexage de polarisation (DP-QPSK) opérant à 100 Gbps est devenue un standard pour la transmission WDM longue distance. Une alternative au format DP-QPSK permettant d’atteindre des débits de 100 Gbps et plus (400 G & 1Tbps) est l’ « Orthogonal Frequency Division Multiplexing » (OFDM). Mais, des interrogations subsistent quant à sa robustesse aux effets non linéaires. Dans cette thèse nous avons étudié le potentiel de la technologie OFDM pour la transmission WDM longue distance à 100 Gbps. Le traitement du signal est détaillé ainsi que la mise en œuvre du transmetteur et récepteur OFDM cohérent. Nous présentons aussi les résultats expérimentaux de la transmission obtenus dans plusieurs configurations. Dans l’une de ces configurations, le canal modulé avec le format DP-OFDM coherent (Co-DP-OFDM) est multiplexé avec 40 canaux modulés en DP-QPSK à 100 Gbps. Les canaux ont ensuite été transmis sur 1000 km de fibre G.652 sans gestion de dispersion chromatique. Dans une autre configuration, les canaux Co-DP-OFDM et Co-DP-QPSK sont combinés avec 78 canaux 10 Gbps NRZ-OOK et transmis sur 1000 km de fibre G.652 avec gestion de dispersion. Nous avons montré que le Co-DP-OFDM et Co-DP-QPSK ont des performances similaires après une transmission de 1000 km sur une ligne sans gestion de dispersion, et nous avons aussi montré que la transmission de ces formats sur une infrastructure de fibre deployée est possible à condition de réduire de 5 dB la puissance des canaux 10 Gbps NRZ-OOK par rapport aux canaux à100 Gbps. Ces résultats sont précieux pour la prochaine génération de systèmes WDM à 400 Gbps ou 1 Tbps

Design and Analysis of Binary Driven Coherent M-ary Qam Transmitter for Next Generation Optical Networks

This work presents a design for a binary driven optical square M-ary quadrature amplitude modulation (QAM) transmitter for high speed optical networks. The transmitter applies tandem quadrature phase shift keying (QPSK) modulators to eliminate the need for linear broadband amplifiers and high-resolution digital to analog converters (DACs), which are both required by conventional transmitters. The transmitter design could be scaled to any order of square M-ary QAM by simply adding more QPSK modulators in tandem. It also provides a Gray coded symbol constellation, insuring the lowest bit error rate possible during symbol recovery. We also provide the design for the coupling ratios of the optical couplers that take into account the insertion loss of the optical components, in order to generate a proper 16-QAM and 64-QAM symbol constellation with equally-spaced symbols. Additionally, we analyze the impact of coupling ratio errors as well as phase errors on the bit error rate (BER) performance and constellation diagrams. The performance is tested using the OptiSystem simulation at 50 Gbaud and under presence of additive white Gaussian noise (AWGN), which demonstrated high quality symbol constellation and a BER performance similar to theoretical expectations. For 16-QAM, a BER better than 10-4 and power penalty of about 2 dB are achieved for coupling ratio errors less than 10 %, or phase errors within ±7 degrees. The 64-QAM transmitter, on the other hand, demonstrated a BER better than 10-4 and power penalty of about 1 dB for coupling ratio errors less than 4%, or phase errors within ±2 degrees. Adviser: Lim Nguye

Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications

The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP). DSP has played a critical role in accommodating channel impairments mitigation, enabling advanced modulation formats for spectral efficiency transmission and realizing flexible bandwidth. This book aims to explore novel, advanced DSP techniques to enable multi-Tb/s/channel optical transmission to address pressing bandwidth and power-efficiency demands. It provides state-of-the-art advances and future perspectives of DSP as well