Unattended network operations technology assessment study. Technical support for defining advanced satellite systems concepts

The results are summarized of an unattended network operations technology assessment study for the Space Exploration Initiative (SEI). The scope of the work included: (1) identified possible enhancements due to the proposed Mars communications network; (2) identified network operations on Mars; (3) performed a technology assessment of possible supporting technologies based on current and future approaches to network operations; and (4) developed a plan for the testing and development of these technologies. The most important results obtained are as follows: (1) addition of a third Mars Relay Satellite (MRS) and MRS cross link capabilities will enhance the network's fault tolerance capabilities through improved connectivity; (2) network functions can be divided into the six basic ISO network functional groups; (3) distributed artificial intelligence technologies will augment more traditional network management technologies to form the technological infrastructure of a virtually unattended network; and (4) a great effort is required to bring the current network technology levels for manned space communications up to the level needed for an automated fault tolerance Mars communications network

Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure

This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version

Second CLIPS Conference Proceedings, volume 1

Topics covered at the 2nd CLIPS Conference held at the Johnson Space Center, September 23-25, 1991 are given. Topics include rule groupings, fault detection using expert systems, decision making using expert systems, knowledge representation, computer aided design and debugging expert systems

A Generic Network and System Management Framework

Networks and distributed systems have formed the basis of an ongoing communications revolution that has led to the genesis of a wide variety of services. The constantly increasing size and complexity of these systems does not come without problems. In some organisations, the deployment of Information Technology has reached a state where the benefits from downsizing and rightsizing by adding new services are undermined by the effort required to keep the system running. Management of networks and distributed systems in general has a straightforward goal: to provide a productive environment in which work can be performed effectively. The work required for management should be a small fraction of the total effort. Most IT systems are still managed in an ad hoc style without any carefully elaborated plan. In such an environment the success of management decisions depends totally on the qualification and knowledge of the administrator. The thesis provides an analysis of the state of the art in the area of Network and System Management and identifies the key requirements that must be addressed for the provisioning of Integrated Management Services. These include the integration of the different management related aspects (i.e. integration of heterogeneous Network, System and Service Management). The thesis then proposes a new framework, INSMware, for the provision of Management Services. It provides a fundamental basis for the realisation of a new approach to Network and System Management. It is argued that Management Systems can be derived from a set of pre-fabricated and reusable Building Blocks that break up the required functionality into a number of separate entities rather than being developed from scratch. It proposes a high-level logical model in order to accommodate the range of requirements and environments applicable to Integrated Network and System Management that can be used as a reference model. A development methodology is introduced that reflects principles of the proposed approach, and provides guidelines to structure the analysis, design and implementation phases of a management system. The INSMware approach can further be combined with the componentware paradigm for the implementation of the management system. Based on these principles, a prototype for the management of SNMP systems has been implemented using industry standard middleware technologies. It is argued that development of a management system based on Componentware principles can offer a number of benefits. INSMware Components may be re-used and system solutions will become more modular and thereby easier to construct and maintain

A Real Time Distributed Network Monitoring Platform (RTDNM)

Perkembangan geografi dan peningkatan saiz dalam rangkaian-rangkaian komputer menjadikan keperluan pemantauan terhadapnya menjadi semakin penting. As computer networks increase in size and expand geographically, the necessity to monitor them becomes increasingly important

New Challenges in Quality of Services Control Architectures in Next Generation Networks

A mesura que Internet i les xarxes IP s'han anat integrant dins la societat i les corporacions, han anat creixent les expectatives de nous serveis convergents així com les expectatives de qualitat en les comunicacions. Les Next Generation Networks (NGN) donen resposta a les noves necessitats i representen el nou paradigma d'Internet a partir de la convergència IP. Un dels aspectes menys desenvolupats de les NGN és el control de la Qualitat del Servei (QoS), especialment crític en les comunicacions multimèdia a través de xarxes heterogènies i/o de diferents operadors. A més a més, les NGN incorporen nativament el protocol IPv6 que, malgrat les deficiències i esgotament d'adreces IPv4, encara no ha tingut l'impuls definitiu.Aquesta tesi està enfocada des d'un punt de vista pràctic. Així doncs, per tal de poder fer recerca sobre xarxes de proves (o testbeds) que suportin IPv6 amb garanties de funcionament, es fa un estudi en profunditat del protocol IPv6, del seu grau d'implementació i dels tests de conformància i interoperabilitat existents que avaluen la qualitat d'aquestes implementacions. A continuació s'avalua la qualitat de cinc sistemes operatius que suporten IPv6 mitjançant un test de conformància i s'implementa el testbed IPv6 bàsic, a partir del qual es farà la recerca, amb la implementació que ofereix més garanties.El QoS Broker és l'aportació principal d'aquesta tesi: un marc integrat que inclou un sistema automatitzat per gestionar el control de la QoS a través de sistemes multi-domini/multi-operador seguint les recomanacions de les NGN. El sistema automatitza els mecanismes associats a la configuració de la QoS dins d'un mateix domini (sistema autònom) mitjançant la gestió basada en polítiques de QoS i automatitza la negociació dinàmica de QoS entre QoS Brokers de diferents dominis, de forma que permet garantir QoS extrem-extrem sense fissures. Aquesta arquitectura es valida sobre un testbed de proves multi-domini que utilitza el mecanisme DiffServ de QoS i suporta IPv6.L'arquitectura definida en les NGN permet gestionar la QoS tant a nivell 3 (IP) com a nivell 2 (Ethernet, WiFi, etc.) de forma que permet gestionar també xarxes PLC. Aquesta tesi proposa una aproximació teòrica per aplicar aquesta arquitectura de control, mitjançant un QoS Broker, a les noves xarxes PLC que s'estan acabant d'estandarditzar, i discuteix les possibilitats d'aplicació sobre les futures xarxes de comunicació de les Smart Grids.Finalment, s'integra en el QoS Broker un mòdul per gestionar l'enginyeria del tràfic optimitzant els dominis mitjançant tècniques de intel·ligència artificial. La validació en simulacions i sobre un testbed amb routers Cisco demostra que els algorismes genètics híbrids són una opció eficaç en aquest camp.En general, les observacions i avenços assolits en aquesta tesi contribueixen a augmentar la comprensió del funcionament de la QoS en les NGN i a preparar aquests sistemes per afrontar problemes del món real de gran complexitat.A medida que Internet y las redes IP se han ido integrando dentro de la sociedad y las corporaciones, han ido creciendo las expectativas de nuevos servicios convergentes así como las expectativas de calidad en las comunicaciones. Las Next Generation Networks (NGN) dan respuesta a las nuevas necesidades y representan el nuevo paradigma de Internet a partir de la convergencia IP. Uno de los aspectos menos desarrollados de las NGN es el control de la Calidad del Servicio (QoS), especialmente crítico en las comunicaciones multimedia a través de redes heterogéneas y/o de diferentes operadores. Además, las NGN incorporan nativamente el protocolo IPv6 que, a pesar de las deficiencias y agotamiento de direcciones IPv4, aún no ha tenido el impulso definitivo.Esta tesis está enfocada desde un punto de vista práctico. Así pues, con tal de poder hacer investigación sobre redes de prueba (o testbeds) que suporten IPv6 con garantías de funcionamiento, se hace un estudio en profundidad del protocolo IPv6, de su grado de implementación y de los tests de conformancia e interoperabilidad existentes que evalúan la calidad de estas implementaciones. A continuación se evalua la calidad de cinco sistemas operativos que soportan IPv6 mediante un test de conformancia y se implementa el testbed IPv6 básico, a partir del cual se realizará la investigación, con la implementación que ofrece más garantías.El QoS Broker es la aportación principal de esta tesis: un marco integrado que incluye un sistema automatitzado para gestionar el control de la QoS a través de sistemas multi-dominio/multi-operador siguiendo las recomendaciones de las NGN. El sistema automatiza los mecanismos asociados a la configuración de la QoS dentro de un mismo dominio (sistema autónomo) mediante la gestión basada en políticas de QoS y automatiza la negociación dinámica de QoS entre QoS brokers de diferentes dominios, de forma que permite garantizar QoS extremo-extremo sin fisuras. Esta arquitectura se valida sobre un testbed de pruebas multi-dominio que utiliza el mecanismo DiffServ de QoS y soporta IPv6. La arquitectura definida en las NGN permite gestionar la QoS tanto a nivel 3 (IP) o como a nivel 2 (Ethernet, WiFi, etc.) de forma que permite gestionar también redes PLC. Esta tesis propone una aproximación teórica para aplicar esta arquitectura de control, mediante un QoS Broker, a las noves redes PLC que se están acabando de estandardizar, y discute las posibilidades de aplicación sobre las futuras redes de comunicación de las Smart Grids.Finalmente, se integra en el QoS Broker un módulo para gestionar la ingeniería del tráfico optimizando los dominios mediante técnicas de inteligencia artificial. La validación en simulaciones y sobre un testbed con routers Cisco demuestra que los algoritmos genéticos híbridos son una opción eficaz en este campo.En general, las observaciones y avances i avances alcanzados en esta tesis contribuyen a augmentar la comprensión del funcionamiento de la QoS en las NGN y en preparar estos sistemas para afrontar problemas del mundo real de gran complejidad.The steady growth of Internet along with the IP networks and their integration into society and corporations has brought with it increased expectations of new converged services as well as greater demands on quality in communications. The Next Generation Networks (NGNs) respond to these new needs and represent the new Internet paradigm from the IP convergence. One of the least developed aspects in the NGNs is the Quality of Service (QoS) control, which is especially critical in the multimedia communication through heterogeneous networks and/or different operators. Furthermore, the NGNs natively incorporate the IPv6 protocol which, despite its shortcomings and the depletion of IPv4 addresses has not been boosted yet.This thesis has been developed with a practical focus. Therefore, with the aim of carrying out research over testbeds supporting the IPv6 with performance guarantees, an in-depth study of the IPv6 protocol development has been conducted and its degree of implementation and the existing conformance and interoperability tests that evaluate these implementations have been studied. Next, the quality of five implementations has been evaluated through a conformance test and the basic IPv6 testbed has been implemented, from which the research will be carried out. The QoS Broker is the main contribution to this thesis: an integrated framework including an automated system for QoS control management through multi-domain/multi-operator systems according to NGN recommendations. The system automates the mechanisms associated to the QoS configuration inside the same domain (autonomous system) through policy-based management and automates the QoS dynamic negotiation between peer QoS Brokers belonging to different domains, so it allows the guarantee of seamless end-to-end QoS. This architecture is validated over a multi-domain testbed which uses the QoS DiffServ mechanism and supports IPv6.The architecture defined in the NGN allows QoS management at level 3 (IP) as well as at level 2 (e.g. Ethernet, WiFi) so it also facilitates the management of PLC networks. Through the use of a QoS Broker, this thesis proposes a theoretical approach for applying this control architecture to the newly standardized PLC networks, and discusses the possibilities of applying it over the future communication networks of the Smart Grids.Finally, a module for managing traffic engineering which optimizes the network domains through artificial intelligence techniques is integrated in the QoS Broker. The validations by simulations and over a Cisco router testbed demonstrate that hybrid genetic algorithms are an effective option in this area.Overall, the advances and key insights provided in this thesis help advance our understanding of QoS functioning in the NGNs and prepare these systems to face increasingly complex problems, which abound in current industrial and scientific applications

A survey on online monitoring approaches of computer-based systems

This report surveys forms of online data collection that are in current use (as well as being the subject of research to adapt them to changing technology and demands), and can be used as inputs to assessment of dependability and resilience, although they are not primarily meant for this use

Real time data acquisition of commercial microwave link networks for hydrometeorological applications

The usage of data from commercial microwave link (CML) networks for scientific purposes is becoming increasingly popular, in particular for rain rate estimation. However, data acquisition and availability is still a crucial problem and limits research possibilities. To overcome this issue, we have developed an open source data acquisition system based on the Simple Network Management Protocol (SNMP). It is able to record transmitted- and received signal levels of a large number of CMLs simultaneously with a temporal resolution of up to one second. We operate this system at Ericsson Germany, acquiring data from 450 CMLs with minutely real time transfer to our data base. Our data acquisition system is not limited to a particular CML hardware model or manufacturer, though. We demonstrate this by running the same system for CMLs of a different manufacturer, operated by an alpine skiing resort in Germany. There, the data acquisition is running simultaneously for four CMLs with a temporal resolution of one second. We present an overview of our system, describe the details of the necessary SNMP requests and show results from its operational application

Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues. The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies). The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks. Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications. The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way. The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools. This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks. Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research. It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites. The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation

Real Time Control for Intelligent 6G Networks

The benefits of telemetry for optical networking have been shown in the literature, and several telemetry architectures have been defined. In general, telemetry data is collected from observation points in the devices and sent to a central system running besides the Software Defined Networking (SDN) controller. In this project, we try to develop a telemetry architecture that supports intelligent data aggregation and nearby data collection. Several frameworks and technologies have been explored to ensure that they fit well into the architecture's composition. A description of these different technologies is presented in this work, along with a comparison between their main features and downsides. Some intelligent techniques, aka. Algorithms have been stated and tested within architecture, showing their benefits by reducing the amount of data processed. In the design of this architecture, the main issues related to distributed systems have been faced, and some initial solutions have been proposed. In particular, several security solutions have been explored to deal with threats but also with scalability and performance issues, trying to find a balance between performance and security. Finally, two use cases are presented, showing a real implementation of the architecture that has been presented at conferences and validated within the project's development