DESIGN OF BLOCK-BACKSTEPPING CONTROLLER TO BALL AND ARC SYSTEM BASED ON ZERO DYNAMIC THEORY

This paper develops a proposed block-backstepping algorithm for balancing and tracking control of ball and arc system. Two block-backstepping designs have been presented; one from the linearized model and other from a nonlinear model of the considered underactuated system. Also, two main control objectives have been achieved; firstly to bring the ball to rest on the top of the arc and secondly to make the cart track a defined reference trajectory. Moreover, integral action is included in the developed block-backstepping control law to improve the steadystate characteristics and to enhance the robustness of the overall system. Additionally, the internal stability of the nonlinear system has been analyzed using zero dynamic criteria to guarantee the global asymptotic stability at the desired equilibrium point. The performance of the designed control algorithm is assessed via simulated results. The results show that the block-backstepping controller designed for nonlinear system gives better transient performance than that designed for the linear system. Also, the nonlinear controller can cope with larger initial angular ball position without loss of stability

Lyapunov based optimal control of a class of nonlinear systems

Optimal control of nonlinear systems is in fact difficult since it requires the solution to the Hamilton-Jacobi-Bellman (HJB) equation which has no closed-form solution. In contrast to offline and/or online iterative schemes for optimal control, this dissertation in the form of five papers focuses on the design of iteration free, online optimal adaptive controllers for nonlinear discrete and continuous-time systems whose dynamics are completely or partially unknown even when the states not measurable. Thus, in Paper I, motivated by homogeneous charge compression ignition (HCCI) engine dynamics, a neural network-based infinite horizon robust optimal controller is introduced for uncertain nonaffine nonlinear discrete-time systems. First, the nonaffine system is transformed into an affine-like representation while the resulting higher order terms are mitigated by using a robust term. The optimal adaptive controller for the affinelike system solves HJB equation and identifies the system dynamics provided a target set point is given. Since it is difficult to define the set point a priori in Paper II, an extremum seeking control loop is designed while maximizing an uncertain output function. On the other hand, Paper III focuses on the infinite horizon online optimal tracking control of known nonlinear continuous-time systems in strict feedback form by using state and output feedback by relaxing the initial admissible controller requirement. Paper IV applies the optimal controller from Paper III to an underactuated helicopter attitude and position tracking problem. In Paper V, the optimal control of nonlinear continuous-time systems in strict feedback form from Paper III is revisited by using state and output feedback when the internal dynamics are unknown. Closed-loop stability is demonstrated for all the controller designs developed in this dissertation by using Lyapunov analysis --Abstract, page iv

Développement d'outils de calcul et de logiciels pour la réalisation et l'implantation de stratégies de commande non linéaires échantillonnées

Cette thèse concerne la conception de commandes échantillonnées pour les systèmes non-linéaires en temps continu. Les systèmes échantillonnés sont des éléments inhérents aux systèmes contrôlés par ordinateur, les systèmes hybrides ou les systèmes embarqués. La conception et le calcul des contrôleurs numériques appropriés sont des taches difficiles car ils contiennent des composants à la fois continu et en temps discret. Ce travail s'inscrit dans une activité de recherche menée par S. Monaco et D. Normand-Cyrot dans le domaine des systèmes échantillonnés non-linéaires. L'idée de base est de concevoir des contrôleurs digitaux qui permettent de récupérer certaines propriétés en temps continu qui sont généralement dégradées par l'échantillonnage. Tel est le cas de l'émulation lorsque les contrôleurs en temps continu sont mis en ouvre en utilisant des bloqueurs d'ordre zéro. Cette thèse apporte des contributions dans trois directions complémentaires. La première concerne les développements théoriques: une nouvelle conception de type backstepping digital" est proposée pour les systèmes en forme strict-feedback". Cette méthode est comparée à d'autres stratégies proposées dans la littérature. La deuxième contribution est le développement d'un logiciel pour la synthèse des contrôleurs et d'une boîte à outils" pour simuler (en Matlab) les systèmes échantillonnés non-linéaires et leurs contrôleurs. Cette boîte à outils inclut plusieurs algorithmes pour la synthèse de contrôleurs échantillonnés tels que: commande de type multi-échelle, reproduction entrée-sortie/Lyapunov, backstepping digital, etc. La troisième contribution concerne plusieurs études de cas menées pour mettre en évidence les performances des contrôleurs échantillonnés, calculés avec l'aide du logiciel. Des résultats expérimentaux et des simulations sont décrits pour divers exemples réels dans les domaines électriques et mécaniques.This thesis is concerned with the sampled-data control of non-linear continuous-time systems. Sampled-data systems are present in all computer controlled, hybrid or embedded systems. The design and computation of suitable digital controllers represent unavoidable tasks since both continuous and discrete-time components interact. The basic framework of this work takes part of a wide research activity performed by S. Monaco and D. Normand-Cyrot regarding non-linear sampled-data systems. The underlying idea is to design digital controllers that recover certain continuous-time properties that are usually degraded through sampling as it is the case when continuous-time controllers are implemented by means of zero-order holder devices (emulated control). This thesis brings contributions into three different directions. The first one regards theoretical developments: a new digital backstepping-like strategy design for strict-feedback systems is proposed. This method is compared with other strategies proposed in the literature. The second contribution is the development of a control designer and of a simulation toolbox (in Matlab) for non-linear sampled-data systems. This toolbox includes different digital design strategies such as: multi-rate control, input-output/Lyapunov matching, digital backstepping design, etc. The third contribution concerns several case studies conducted to highlight the performances of the sampled-data controller designs, computed by the means of the software toolbox. Experimental and simulation results are described for various real examples especially in the area of electrical and mechanical processes.PARIS11-SCD-Bib. électronique (914719901) / SudocSudocFranceF

Observation and control of a ball on a tilting

The ball and plate system is a nonlinear MIMO system that has interesting characteristics which are also present in aerospace and industrial systems, such as: instability, subactuation, nonlinearities such as friction, backlash, and delays in the measurements. In this work, the modeling of the system is based on the Lagrange approach. Then it is represented in the state-space form with plate accelerations as inputs to the system. These have a similar effect as applying torques. In addition, the use of an internal loop of the servo system is considered. From the obtained model, we proceed to carry out the analysis of controllability and observability resulting in that the system is globally weak observable and locally controllable in the operating range. Then, the Jacobi linearization is performed to use the linearized model in the design of linear controllers for stabilization. On the other hand, analyzing the internal dynamics of the ball and plate system turns out to be a non-minimum phase system, which makes it difficult to design the tracking control using the exact model. This is the reason why we proceed to make approximations. Using the approximate model, nonlinear controllers are designed for tracking using different approaches as: feedback linearization for tracking with and without integral action, backstepping and sliding mode. In addition, linear and nonlinear observers are designed to provide full state information to the controller. Simulation tests are performed comparing the different control and observation approaches. Moreover, the effect of the delay in the measurement is analyzed, where it is seen that the greater the frequency of the reference signal the more the error is increased. Then, adding the Smith predictor compensates the delay and reduces the tracking error. Finally, tests performed with the real system. The system was successfully controlled for stabilization and tracking using the designed controllers. However, it is noticed that the effect of the friction, the spring oscillation and other non-modeled characteristics significantly affect the performance of the control.Tesi

Formation control of nonholonomic mobile robots: the virtual structure approach

PhDIn recent years, there has been a considerable growth in applications of multi-robot systems as opposed to single-robot systems. This thesis presents our proposed solutions to a formation control problem in which mobile robots are required to create a desired formation shape and track a desired trajectory as a whole. In the first instance, we study the formation control problem for unicycle mobile robots. We propose two control algorithms based on a cascaded approach: one based on a kinematic model of a robot and the other based on a dynamic model. We also propose a saturated controller in which actuator limitations are explicitly accounted for. To demonstrate how the control algorithms work, we present an extensive simulation and experimental study. Thereafter we move on to formation control algorithms in which the coordination error is explicitly defined. Thus, we are able to give conditions for robots keeping their desired formation shape without necessarily tracking the desired trajectory. We also introduce a controller in which both trajectory tracking and formation shape maintenance are achieved as well as a saturated algorithm. We validate the applicability of the introduced controllers in simulations and experiments. Lastly, we study the formation control problem for car-like robots. In this case we develop a controller using the backstepping technique. We give conditions for robots keeping their desired formation shape while failing to track their desired trajectories and present simulation results to demonstrate the applicability of the proposed controlle

Output Consensus Control for Heterogeneous Multi-Agent Systems

We study distributed output feedback control of a heterogeneous multi-agent system (MAS), consisting of N different continuous-time linear dynamical systems. For achieving output consensus, a virtual reference model is assumed to generate the desired trajectory for which the MAS is required to track and synchronize. A full information (FI) protocol is assumed for consensus control. This protocol includes information exchange with the feed-forward signals. In this dissertation we study two different kinds of consensus problems. First, we study the consensus control over the topology involving time delays and prove that consensus is independent of delay lengths. Second, we study the consensus under communication constraints. In contrast to the existing work, the reference trajectory is transmitted to only one or a few agents and no local reference models are employed in the feedback controllers thereby eliminating synchronization of the local reference models. Both significantly lower the communication overhead. In addition, our study is focused on the case when the available output measurements contain only relative information from the neighboring agents and reference signal. Conditions are derived for the existence of distributed output feedback control protocols, and solutions are proposed to synthesize the stabilizing and consensus control protocol over a given connected digraph. It is shown that the H-inf loop shaping and LQG/LTR techniques from robust control can be directly applied to design the consensus output feedback control protocol. The results in this dissertation complement the existing ones, and are illustrated by a numerical example. The MAS approach developed in this dissertation is then applied to the development of autonomous aircraft traffic control system. The development of such systems have already started to replace the current clearance-based operations to trajectory based operations. Such systems will help to reduce human errors, increase efficiency, provide safe flight path, and improve the performance of the future flight

Nonlinear control and synchronization of multiple Lagrangian systems with application to tethered formation flight spacecraft

Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2007.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 217-228).This dissertation focuses on the synchronization of multiple dynamical systems using contraction theory, with applications to cooperative control of multi-agent systems and synchronization of interconnected dynamics such as tethered formation flight. Inspired by stable combinations of biological systems, contraction nonlinear stability theory provides a systematic method to reduce arbitrarily complex systems into simpler elements. One application of oscillation synchronization is a fully decentralized nonlinear control law, which eliminates the need for any inter-satellite communications. We use contraction theory to prove that a nonlinear control law stabilizing a single-tethered spacecraft can also stabilize arbitrarily large circular arrays of tethered spacecraft, as well as a three-spacecraft inline configuration. The convergence result is global and exponential due to the nature of contraction analysis. The proposed decentralized control strategy is further extended to robust adaptive control in order to account for model uncertainties. Numerical simulations and experimental results validate the exponential stability of the tethered formation arrays by implementing a tracking control law derived from the reduced dynamics.(cont.) This thesis also presents a new synchronization framework that can be directly applied to cooperative control of autonomous aerospace vehicles and oscillation synchronization in robotic manipulation and locomotion. We construct a dynamical network of multiple Lagrangian systems by adding diffusive couplings to otherwise freely moving or flying vehicles. The proposed tracking control law synchronizes an arbitrary number of robots into a common trajectory with global exponential convergence. The proposed control law is much simpler than earlier work in terms of both the computational load and the required signals. Furthermore, in contrast with earlier work which used simple double integrator models, the proposed method permits highly nonlinear systems and is further extended to adaptive synchronization, partial-joint coupling, and concurrent synchronization. Another contribution of the dissertation is a novel nonlinear control approach for underactuated tethered formation flight spacecraft. This is motivated by a controllability analysis that indicates that both array resizing and spin-up are fully controllable by the reaction wheels and the tether motor. This work reports the first propellant-free underactuated control results for tethered formation flight.(cont.) We also fulfill the potential of the proposed strategy by providing a new momentum dumping method. This dissertation work has evolved based on the research philosophy of balancing theoretical work with practicality, aiming at physically intuitive algorithms that can be directly implemented in real systems. In order to validate the effectiveness of the decentralized control and estimation framework, a new suite of hardware has been designed and added to the SPHERES (Synchronize Position Hold Engage and Reorient Experimental Satellite) testbed. Such recent improvements described in this dissertation include a new tether reel mechanism, a force-torque sensor and an air-bearing carriage with a reaction wheel. This thesis also introduces a novel relative attitude estimator, in which a series of Kalman filters incorporate the gyro, force-torque sensor and ultrasound ranging measurements. The closed-loop control experiments can be viewed at ...by Soon-Jo Chung.Sc.D

Control of chaos in nonlinear circuits and systems

Nonlinear circuits and systems, such as electronic circuits (Chapter 5), power converters (Chapter 6), human brains (Chapter 7), phase lock loops (Chapter 8), sigma delta modulators (Chapter 9), etc, are found almost everywhere. Understanding nonlinear behaviours as well as control of these circuits and systems are important for real practical engineering applications. Control theories for linear circuits and systems are well developed and almost complete. However, different nonlinear circuits and systems could exhibit very different behaviours. Hence, it is difficult to unify a general control theory for general nonlinear circuits and systems. Up to now, control theories for nonlinear circuits and systems are still very limited. The objective of this book is to review the state of the art chaos control methods for some common nonlinear circuits and systems, such as those listed in the above, and stimulate further research and development in chaos control for nonlinear circuits and systems. This book consists of three parts. The first part of the book consists of reviews on general chaos control methods. In particular, a time-delayed approach written by H. Huang and G. Feng is reviewed in Chapter 1. A master slave synchronization problem for chaotic Lur’e systems is considered. A delay independent and delay dependent synchronization criteria are derived based on the H performance. The design of the time delayed feedback controller can be accomplished by means of the feasibility of linear matrix inequalities. In Chapter 2, a fuzzy model based approach written by H.K. Lam and F.H.F. Leung is reviewed. The synchronization of chaotic systems subject to parameter uncertainties is considered. A chaotic system is first represented by the fuzzy model. A switching controller is then employed to synchronize the systems. The stability conditions in terms of linear matrix inequalities are derived based on the Lyapunov stability theory. The tracking performance and parameter design of the controller are formulated as a generalized eigenvalue minimization problem which is solved numerically via some convex programming techniques. In Chapter 3, a sliding mode control approach written by Y. Feng and X. Yu is reviewed. Three kinds of sliding mode control methods, traditional sliding mode control, terminal sliding mode control and non-singular terminal sliding mode control, are employed for the control of a chaotic system to realize two different control objectives, namely to force the system states to converge to zero or to track desired trajectories. Observer based chaos synchronizations for chaotic systems with single nonlinearity and multi-nonlinearities are also presented. In Chapter 4, an optimal control approach written by C.Z. Wu, C.M. Liu, K.L. Teo and Q.X. Shao is reviewed. Systems with nonparametric regression with jump points are considered. The rough locations of all the possible jump points are identified using existing kernel methods. A smooth spline function is used to approximate each segment of the regression function. A time scaling transformation is derived so as to map the undecided jump points to fixed points. The approximation problem is formulated as an optimization problem and solved via existing optimization tools. The second part of the book consists of reviews on general chaos controls for continuous-time systems. In particular, chaos controls for Chua’s circuits written by L.A.B. Tôrres, L.A. Aguirre, R.M. Palhares and E.M.A.M. Mendes are discussed in Chapter 5. An inductorless Chua’s circuit realization is presented, as well as some practical issues, such as data analysis, mathematical modelling and dynamical characterization, are discussed. The tradeoff among the control objective, the control energy and the model complexity is derived. In Chapter 6, chaos controls for pulse width modulation current mode single phase H-bridge inverters written by B. Robert, M. Feki and H.H.C. Iu are discussed. A time delayed feedback controller is used in conjunction with the proportional controller in its simple form as well as in its extended form to stabilize the desired periodic orbit for larger values of the proportional controller gain. This method is very robust and easy to implement. In Chapter 7, chaos controls for epileptiform bursting in the brain written by M.W. Slutzky, P. Cvitanovic and D.J. Mogul are discussed. Chaos analysis and chaos control algorithms for manipulating the seizure like behaviour in a brain slice model are discussed. The techniques provide a nonlinear control pathway for terminating or potentially preventing epileptic seizures in the whole brain. The third part of the book consists of reviews on general chaos controls for discrete-time systems. In particular, chaos controls for phase lock loops written by A.M. Harb and B.A. Harb are discussed in Chapter 8. A nonlinear controller based on the theory of backstepping is designed so that the phase lock loops will not be out of lock. Also, the phase lock loops will not exhibit Hopf bifurcation and chaotic behaviours. In Chapter 9, chaos controls for sigma delta modulators written by B.W.K. Ling, C.Y.F. Ho and J.D. Reiss are discussed. A fuzzy impulsive control approach is employed for the control of the sigma delta modulators. The local stability criterion and the condition for the occurrence of limit cycle behaviours are derived. Based on the derived conditions, a fuzzy impulsive control law is formulated so that the occurrence of the limit cycle behaviours, the effect of the audio clicks and the distance between the state vectors and an invariant set are minimized supposing that the invariant set is nonempty. The state vectors can be bounded within any arbitrary nonempty region no matter what the input step size, the initial condition and the filter parameters are. The editors are much indebted to the editor of the World Scientific Series on Nonlinear Science, Prof. Leon Chua, and to Senior Editor Miss Lakshmi Narayan for their help and congenial processing of the edition