Designing Approximate Computing Circuits with Scalable and Systematic Data-Driven Techniques

Semiconductor feature size has been shrinking significantly in the past decades. This decreasing trend of feature size leads to faster processing speed as well as lower area and power consumption. Among these attributes, power consumption has emerged as the primary concern in the design of integrated circuits in recent years due to the rapid increasing demand of energy efficient Internet of Things (IoT) devices. As a result, low power design approaches for digital circuits have become of great attractive in the past few years. To this end, approximate computing in hardware design has emerged as a promising design technique. It provides design opportunities to improve timing and energy efficiency by relaxing computing quality. This technique is feasible because of the error-resiliency of many emerging resource-hungry computational applications such as multimedia processing and machine learning. Thus, it is reasonable to utilize this characteristic to trade an acceptable amount of computing quality for energy saving. In the literature, most prior works on approximate circuit design focus on using manual design strategies to redesign fundamental computational blocks such as adders and multipliers. However, the manual design techniques are not suitable for system level hardware due to much higher design complexity. In order to tackle this challenge, we focus on designing scalable, systematic and general design methodologies that are applicable on any circuits. In this paper, we present two novel approximate circuit design methods based on machine learning techniques. Both methods skip the complicated manual analysis steps and primarily look at the given input-error pattern to generate approximate circuits. Our first work presents a framework for designing compensation block, an essential component in many approximate circuits, based on feature selection. Our second work further extends and optimizes this framework and integrates data-driven consideration into the design. Several case studies on fixed-width multipliers and other approximate circuits are presented to demonstrate the effectiveness of the proposed design methods. The experimental results show that both of the proposed methods are able to automatically and efficiently design low-error approximate circuits

Energy-efficient embedded machine learning algorithms for smart sensing systems

Embedded autonomous electronic systems are required in numerous application domains such as Internet of Things (IoT), wearable devices, and biomedical systems. Embedded electronic systems usually host sensors, and each sensor hosts multiple input channels (e.g., tactile, vision), tightly coupled to the electronic computing unit (ECU). The ECU extracts information by often employing sophisticated methods, e.g., Machine Learning. However, embedding Machine Learning algorithms poses essential challenges in terms of hardware resources and energy consumption because of: 1) the high amount of data to be processed; 2) computationally demanding methods. Leveraging on the trade-off between quality requirements versus computational complexity and time latency could reduce the system complexity without affecting the performance. The objectives of the thesis are to develop: 1) energy-efficient arithmetic circuits outperforming state of the art solutions for embedded machine learning algorithms, 2) an energy-efficient embedded electronic system for the \u201celectronic-skin\u201d (e-skin) application. As such, this thesis exploits two main approaches: Approximate Computing: In recent years, the approximate computing paradigm became a significant major field of research since it is able to enhance the energy efficiency and performance of digital systems. \u201cApproximate Computing\u201d(AC) turned out to be a practical approach to trade accuracy for better power, latency, and size . AC targets error-resilient applications and offers promising benefits by conserving some resources. Usually, approximate results are acceptable for many applications, e.g., tactile data processing,image processing , and data mining ; thus, it is highly recommended to take advantage of energy reduction with minimal variation in performance . In our work, we developed two approximate multipliers: 1) the first one is called \u201cMETA\u201d multiplier and is based on the Error Tolerant Adder (ETA), 2) the second one is called \u201cApproximate Baugh-Wooley(BW)\u201d multiplier where the approximations are implemented in the generation of the partial products. We showed that the proposed approximate arithmetic circuits could achieve a relevant reduction in power consumption and time delay around 80.4% and 24%, respectively, with respect to the exact BW multiplier. Next, to prove the feasibility of AC in real world applications, we explored the approximate multipliers on a case study as the e-skin application. The e-skin application is defined as multiple sensing components, including 1) structural materials, 2) signal processing, 3) data acquisition, and 4) data processing. Particularly, processing the originated data from the e-skin into low or high-level information is the main problem to be addressed by the embedded electronic system. Many studies have shown that Machine Learning is a promising approach in processing tactile data when classifying input touch modalities. In our work, we proposed a methodology for evaluating the behavior of the system when introducing approximate arithmetic circuits in the main stages (i.e., signal and data processing stages) of the system. Based on the proposed methodology, we first implemented the approximate multipliers on the low-pass Finite Impulse Response (FIR) filter in the signal processing stage of the application. We noticed that the FIR filter based on (Approx-BW) outperforms state of the art solutions, while respecting the tradeoff between accuracy and power consumption, with an SNR degradation of 1.39dB. Second, we implemented approximate adders and multipliers respectively into the Coordinate Rotational Digital Computer (CORDIC) and the Singular Value Decomposition (SVD) circuits; since CORDIC and SVD take a significant part of the computationally expensive Machine Learning algorithms employed in tactile data processing. We showed benefits of up to 21% and 19% in power reduction at the cost of less than 5% accuracy loss for CORDIC and SVD circuits when scaling the number of approximated bits. 2) Parallel Computing Platforms (PCP): Exploiting parallel architectures for near-threshold computing based on multi-core clusters is a promising approach to improve the performance of smart sensing systems. In our work, we exploited a novel computing platform embedding a Parallel Ultra Low Power processor (PULP), called \u201cMr. Wolf,\u201d for the implementation of Machine Learning (ML) algorithms for touch modalities classification. First, we tested the ML algorithms at the software level; for RGB images as a case study and tactile dataset, we achieved accuracy respectively equal to 97% and 83.5%. After validating the effectiveness of the ML algorithm at the software level, we performed the on-board classification of two touch modalities, demonstrating the promising use of Mr. Wolf for smart sensing systems. Moreover, we proposed a memory management strategy for storing the needed amount of trained tensors (i.e., 50 trained tensors for each class) in the on-chip memory. We evaluated the execution cycles for Mr. Wolf using a single core, 2 cores, and 3 cores, taking advantage of the benefits of the parallelization. We presented a comparison with the popular low power ARM Cortex-M4F microcontroller employed, usually for battery-operated devices. We showed that the ML algorithm on the proposed platform runs 3.7 times faster than ARM Cortex M4F (STM32F40), consuming only 28 mW. The proposed platform achieves 15 7 better energy efficiency than the classification done on the STM32F40, consuming 81mJ per classification and 150 pJ per operation

Approximate Computing Survey, Part II: Application-Specific & Architectural Approximation Techniques and Applications

The challenging deployment of compute-intensive applications from domains such Artificial Intelligence (AI) and Digital Signal Processing (DSP), forces the community of computing systems to explore new design approaches. Approximate Computing appears as an emerging solution, allowing to tune the quality of results in the design of a system in order to improve the energy efficiency and/or performance. This radical paradigm shift has attracted interest from both academia and industry, resulting in significant research on approximation techniques and methodologies at different design layers (from system down to integrated circuits). Motivated by the wide appeal of Approximate Computing over the last 10 years, we conduct a two-part survey to cover key aspects (e.g., terminology and applications) and review the state-of-the art approximation techniques from all layers of the traditional computing stack. In Part II of our survey, we classify and present the technical details of application-specific and architectural approximation techniques, which both target the design of resource-efficient processors/accelerators & systems. Moreover, we present a detailed analysis of the application spectrum of Approximate Computing and discuss open challenges and future directions.Comment: Under Review at ACM Computing Survey

Design automation of approximate circuits with runtime reconfigurable accuracy

Leveraging the inherent error tolerance of a vast number of application domains that are rapidly growing, approximate computing arises as a design alternative to improve the efficiency of our computing systems by trading accuracy for energy savings. However, the requirement for computational accuracy is not fixed. Controlling the applied level of approximation dynamically at runtime is a key to effectively optimize energy, while still containing and bounding the induced errors at runtime. In this paper, we propose and implement an automatic and circuit independent design framework that generates approximate circuits with dynamically reconfigurable accuracy at runtime. The generated circuits feature varying accuracy levels, supporting also accurate execution. Extensive experimental evaluation, using industry strength flow and circuits, demonstrates that our generated approximate circuits improve the energy by up to 41% for 2% error bound and by 17.5% on average under a pessimistic scenario that assumes full accuracy requirement in the 33% of the runtime. To demonstrate further the efficiency of our framework, we considered two state-of-the-art technology libraries which are a 7nm conventional FinFET and an emerging technology that boosts performance at a high cost of increased dynamic power

Approximation Opportunities in Edge Computing Hardware : A Systematic Literature Review

With the increasing popularity of the Internet of Things and massive Machine Type Communication technologies, the number of connected devices is rising. However, while enabling valuable effects to our lives, bandwidth and latency constraints challenge Cloud processing of their associated data amounts. A promising solution to these challenges is the combination of Edge and approximate computing techniques that allows for data processing nearer to the user. This paper aims to survey the potential benefits of these paradigms’ intersection. We provide a state-of-the-art review of circuit-level and architecture-level hardware techniques and popular applications. We also outline essential future research directions.publishedVersionPeer reviewe

Automated Design of Approximate Accelerators

In den letzten zehn Jahren hat das Bedürfnis nach Recheneffizienz die Entwicklung neuer Geräte, Architekturen und Entwurfstechniken motiviert. Approximate Computing hat sich als modernes, energieeffizientes Entwurfsparadigma für Anwendungen herausgestellt, die eine inhärente Fehlertoleranz aufweisen. Wenn die Genauigkeit der Ergebnisse in aktuellen Anwendungen wie Bildverarbeitung, Computer Vision und maschinellem Lernen auf ein akzeptables Maß reduziert wird, können Einsparungen im Schaltungsbereich, bei der Schaltkreisverzögerung und beim Stromverbrauch erzielt werden. Mit dem Aufkommen dieses Approximate Computing Paradigmas wurden in der Literatur viele approximierte Funktionseinheiten angegeben, insbesondere approximierte Addierer und Multiplizierer. Für eine Vielzahl solcher approximierter Schaltkreise und unter Berücksichtigung ihrer Verwendung als Bausteine für den Entwurf von approximierten Beschleunigern für fehlertolerante Anwendungen, ergibt sich eine Herausforderung: die Auswahl dieser approximierten Schaltkreise für eine bestimmte Anwendung, die die erforderlichen Ressourcen minimieren und gleichzeitig eine definierte Genauigkeit erfüllen. Diese Dissertation schlägt automatisierte Methoden zum Entwerfen und Implementieren von approximierten Beschleunigern vor, die aus approximierten arithmetischen Schaltungen aufgebaut sind. Um dies zu erreichen, befasst sich diese Dissertation mit folgenden Herausforderungen und liefert die nachfolgenden neuartigen Beiträge: In der Literatur wurden viele approximierte Addierer und Multiplizierer vorgestellt, indem entweder approximierte Entwürfe aus genauen Implementierungen wie dem Ripple-Carry-Addierer vorgeschlagen oder durch Approximate Logic Synthesis (ALS) Methoden generiert wurden. Ein repräsentativer Satz dieser approximierten Komponenten ist erforderlich, um approximierte Beschleuniger zu bauen. In diesem Sinne präsentiert diese Dissertation zwei Ansätze, um solche approximierte arithmetische Schaltungen zu erstellen. Zunächst wird AUGER vorgestellt, ein Tool, mit dem Register-Transfer Level (RTL) Beschreibungen für einen breiten Satz von approximierten Addierern und Multiplizierer für unterschiedliche Datenbitbreiten- und Genauigkeitskonfigurationen generiert werden können. Mit AUGER kann eine Design Space Exploration (DSE) von approximierten Komponenten durchgeführt werden, um diejenigen zu finden, die für eine gegebene Bitbreite, einen gegebenen Approximationsbereich und eine gegebene Schaltungsmetrik Pareto-optimal sind. Anschließend wird AxLS vorgestellt, ein Framework für ALS, das die Implementierung modernster Methoden und den Vorschlag neuartiger Methoden ermöglicht, um strukturelle Netzlistentransformationen durchzuführen und approximierte arithmetische Schaltungen aus genauen Schaltungen zu generieren. Darüber hinaus bieten beide Werkzeuge eine Fehlercharakterisierung in Form einer Fehlerverteilung und Schaltungseigenschaften (Fläche, Schaltkreisverzögerung und Leistung) für jede von ihnen erzeugte approximierte Schaltung. Diese Informationen sind für das Untersuchungsziel dieser Dissertation von wesentlicher Bedeutung. Trotz der Fehlertoleranz müssen approximierte Beschleuniger so ausgelegt sein, dass sie Genauigkeitsvorgaben erfüllen. Für den Entwurf solcher Beschleuniger unter Verwendung von approximierten arithmetischen Schaltungen ist es daher unerlässlich zu bewerten, wie sich die durch approximierte Schaltungen verursachten Fehler durch andere Berechnungen ausbreiten, entweder genau oder ungenau, und sich schließlich am Ausgang ansammeln. Diese Dissertation schlägt analytische Modelle vor, um die Fehlerpropagation durch genaue und approximierte Berechnungen zu beschreiben. Mit ihnen wird eine automatisierte, compilerbasierte Methodik vorgeschlagen, um die Fehlerpropagation auf approximierten Beschleunigerdesigns abzuschätzen. Diese Methode ist in ein Tool, CEDA, integriert, um schnelle, simulationsfreie Genauigkeitsschätzungen von approximierten Beschleunigermodellen durchzuführen, die unter Verwendung von C-Code beschrieben wurden. Beim Entwurf von approximierten Beschleunigern benötigen sich wiederholende Simulationen auf Gate-Level und die Schaltungssynthese viel Zeit, um viele oder sogar alle möglichen Kombinationen für einen gegebenen Satz von approximierten arithmetischen Schaltungen zu untersuchen. Andererseits basieren aktuelle Trends beim Entwerfen von Beschleunigern auf High-Level Synthesis (HLS) Werkzeugen. In dieser Dissertation werden analytische Modelle zur Schätzung der erforderlichen Rechenressourcen vorgestellt, wenn approximierte Addierer und Multiplizierer in Konstruktionen von approximierten Beschleunigern verwendet werden. Darüber hinaus werden diese Modelle zusammen mit den vorgeschlagenen analytischen Modellen zur Genauigkeitsschätzung in eine DSE-Methodik für fehlertolerante Anwendungen, DSEwam, integriert, um Pareto-optimale oder nahezu Pareto-optimale Lösungen für approximierte Beschleuniger zu identifizieren. DSEwam ist in ein HLS-Tool integriert, um automatisch RTL-Beschreibungen von approximierten Beschleunigern aus C-Sprachbeschreibungen für eine bestimmte Fehlerschwelle und ein bestimmtes Minimierungsziel zu generieren. Die Verwendung von approximierten Beschleunigern muss sicherstellen, dass Fehler, die aufgrund von approximierten Berechnungen erzeugt werden, innerhalb eines definierten Maximalwerts für eine gegebene Genauigkeitsmetrik bleiben. Die Fehler, die durch approximierte Beschleuniger erzeugt werden, hängen jedoch von den Eingabedaten ab, die hinsichtlich der für das Design verwendeten Daten unterschiedlich sein können. In dieser Dissertation wird ECAx vorgestellt, eine automatisierte Methode zur Untersuchung und Anwendung feinkörniger Fehlerkorrekturen mit geringem Overhead in approximierten Beschleunigern, um die Kosten für die Fehlerkorrektur auf Softwareebene (wie es in der Literatur gemacht wird) zu senken. Dies erfolgt durch selektive Korrektur der signifikantesten Fehler (in Bezug auf ihre Größenordnung), die von approximierten Komponenten erzeugt werden, ohne die Vorteile der Approximationen zu verlieren. Die experimentelle Auswertung zeigt Beschleunigungsverbesserungen für die Anwendung im Austausch für einen leicht gestiegenen Flächen- und Leistungsverbrauch im approximierten Beschleunigerdesign

Input-Conscious Approximate Multiply-Accumulate (MAC) Unit for Energy-Efficiency

The Multiply-Accumulate Unit (MAC) is an integral computational component of all digital signal processing (DSP) architectures and thus has a significant impact on their speed and power dissipation. Due to an extraordinary explosion in the number of battery-powered “Internet of Things” (IoT) devices, the need for reducing the power consumption of DSP architectures has tremendously increased. Approximate computing (AxC) has been proposed as a potential solution for this problem targeting error-resilient applications. In this paper, we present a novel FPGA implementation for input-aware energy-efficient 8-bit approximate MAC (AxMAC) unit that reduces its power consumption by: performing multiplication operation approximately, or approximating the input operands then replacing multiplication by a simple shift operation. We propose an input-aware conditional block to bypass operands multiplication by (1) zero forwarding for zero-value operands, (2) judiciously approximating 43.8% of inputs into power-of-2 values, and (3) replacing the multiplication of power-of-2 operands by a simple shift operation. Experimental results show that these simplification techniques reduce delay, power and energy consumption with an acceptable quality degradation. We evaluate the effectiveness of the proposed AxMAC units on two image processing applications, i.e., image blending and filtering, and a logistic regression classification application. These applications demonstrate a negligible quality loss, with 66.6% energy reduction and 5% area overhead

Implementing Energy Parsimonious Circuits through Inexact Designs

Inexact Circuits or circuits in which accuracy of the output can be traded for cost (energy, delay and/or area) savings, have been receiving increasing attention of late due to invariable inaccuracies in nanometer-scale circuits and a concomitant growing desire for ultra low energy embedded systems. Most of the previous approaches to realize inexact circuits relied on scaling of circuit-level operational parameters (such as supply voltage) to achieve the cost and accuracy tradeoffs, and suffered from serious drawbacks of significant implementation overheads that drastically reduced the gains. In this thesis, two novel architecture-level approaches called Probabilisttc Pruning and Probabilistic Logic Minimization are proposed to realize inexact circuits with zero overhead. Extensive simulations on various architectures of datapath elements and a prototype chip fabrication demonstrate that normalized gains as large as 2X-9.5X in Energy-Delay-Area product can be obtained for relative error as low as 10 -6 % - 1% compared to corresponding conventional correct designs

Low-Power Design of Digital VLSI Circuits around the Point of First Failure

As an increase of intelligent and self-powered devices is forecasted for our future everyday life, the implementation of energy-autonomous devices that can wirelessly communicate data from sensors is crucial. Even though techniques such as voltage scaling proved to effectively reduce the energy consumption of digital circuits, additional energy savings are still required for a longer battery life. One of the main limitations of essentially any low-energy technique is the potential degradation of the quality of service (QoS). Thus, a thorough understanding of how circuits behave when operated around the point of first failure (PoFF) is key for the effective application of conventional energy-efficient methods as well as for the development of future low-energy techniques. In this thesis, a variety of circuits, techniques, and tools is described to reduce the energy consumption in digital systems when operated either in the safe and conservative exact region, close to the PoFF, or even inside the inexact region. A straightforward approach to reduce the power consumed by clock distribution while safely operating in the exact region is dual-edge-triggered (DET) clocking. However, the DET approach is rarely taken, primarily due to the perceived complexity of its integration. In this thesis, a fully automated design flow is introduced for applying DET clocking to a conventional single-edge-triggered (SET) design. In addition, the first static true-single-phase-clock DET flip-flop (DET-FF) that completely avoids clock-overlap hazards of DET registers is proposed. Even though the correct timing of synchronous circuits is ensured in worst-case conditions, the critical path might not always be excited. Thus, dynamic clock adjustment (DCA) has been proposed to trim any available dynamic timing margin by changing the operating clock frequency at runtime. This thesis describes a dynamically-adjustable clock generator (DCG) capable of modifying the period of the produced clock signal on a cycle-by-cycle basis that enables the DCA technique. In addition, a timing-monitoring sequential (TMS) that detects input transitions on either one of the clock phases to enable the selection of the best timing-monitoring strategy at runtime is proposed. Energy-quality scaling techniques aimat trading lower energy consumption for a small degradation on the QoS whenever approximations can be tolerated. In this thesis, a low-power methodology for the perturbation of baseline coefficients in reconfigurable finite impulse response (FIR) filters is proposed. The baseline coefficients are optimized to reduce the switching activity of the multipliers in the FIR filter, enabling the possibility of scaling the power consumption of the filter at runtime. The area as well as the leakage power of many system-on-chips is often dominated by embedded memories. Gain-cell embedded DRAM (GC-eDRAM) is a compact, low-power and CMOS-compatible alternative to the conventional static random-access memory (SRAM) when a higher memory density is desired. However, due to GC-eDRAMs relying on many interdependent variables, the adaptation of existing memories and the design of future GCeDRAMs prove to be highly complex tasks. Thus, the first modeling tool that estimates timing, memory availability, bandwidth, and area of GC-eDRAMs for a fast exploration of their design space is proposed in this thesis