On-board closed-loop congestion control for satellite based packet switching networks

NASA LeRC is currently investigating a satellite architecture that incorporates on-board packet switching capability. Because of the statistical nature of packet switching, arrival traffic may fluctuate and thus it is necessary to integrate congestion control mechanism as part of the on-board processing unit. This study focuses on the closed-loop reactive control. We investigate the impact of the long propagation delay on the performance and propose a scheme to overcome the problem. The scheme uses a global feedback signal to regulate the packet arrival rate of ground stations. In this scheme, the satellite continuously broadcasts the status of its output buffer and the ground stations respond by selectively discarding packets or by tagging the excessive packets as low-priority. The two schemes are evaluated by theoretical queuing analysis and simulation. The former is used to analyze the simplified model and to determine the basic trends and bounds, and the later is used to assess the performance of a more realistic system and to evaluate the effectiveness of more sophisticated control schemes. The results show that the long propagation delay makes the closed-loop congestion control less responsive. The broadcasted information can only be used to extract statistical information. The discarding scheme needs carefully-chosen status information and reduction function, and normally requires a significant amount of ground discarding to reduce the on-board packet loss probability. The tagging scheme is more effective since it tolerates more uncertainties and allows a larger margin of error in status information. It can protect the high-priority packets from excessive loss and fully utilize the downlink bandwidth at the same time

Buffer management and cell switching management in wireless packet communications

The buffer management and the cell switching (e.g., packet handoff) management using buffer management scheme are studied in Wireless Packet Communications. First, a throughput improvement method for multi-class services is proposed in Wireless Packet System. Efficient traffic management schemes should be developed to provide seamless access to the wireless network. Specially, it is proposed to regulate the buffer by the Selective- Delay Push-In (SDPI) scheme, which is applicable to scheduling delay-tolerant non-real time traffic and delay-sensitive real time traffic. Simulation results show that the performance observed by real time traffics are improved as compared to existing buffer priority scheme in term of packet loss probability. Second, the performance of the proposed SDPI scheme is analyzed in a single CBR server. The arrival process is derived from the superposition of two types of traffics, each in turn results from the superposition of homogeneous ON-OFF sources that can be approximated by means of a two-state Markov Modulated Poisson Process (MMPP). The buffer mechanism enables the ATM layer to adapt the quality of the cell transfer to the QoS requirements and to improve the utilization of network resources. This is achieved by selective-delaying and pushing-in cells according to the class they belong to. Analytical expressions for various performance parameters and numerical results are obtained. Simulation results in term of cell loss probability conform with our numerical analysis. Finally, a novel cell-switching scheme based on TDMA protocol is proposed to support QoS guarantee for the downlink. The new packets and handoff packets for each type of traffic are defined and a new cutoff prioritization scheme is devised at the buffer of the base station. A procedure to find the optimal thresholds satisfying the QoS requirements is presented. Using the ON-OFF approximation for aggregate traffic, the packet loss probability and the average packet delay are computed. The performance of the proposed scheme is evaluated by simulation and numerical analysis in terms of packet loss probability and average packet delay

Supporting real time video over ATM networks

Includes bibliographical references.In this project, we propose and evaluate an approach to delimit and tag such independent video slice at the ATM layer for early discard. This involves the use of a tag cell differentiated from the rest of the data by its PTI value and a modified tag switch to facilitate the selective discarding of affected cells within each video slice as opposed to dropping of cells at random from multiple video frames

Congestion Control by Bandwidth-Delay Tradeoff in Very High-Speed Networks: The Case of Window-Based Control

Increasing bandwidth-delay product of high-speed wide-area networks is well-known to make conventional dynamic traffic control schemes sluggish . Still, most existing schemes employ dynamic control, among which TCP and ATM Forum\u27s rate-based flow control are prominent examples. So far, little has been investigated as to how the existing schemes will scale as bandwidth further increases up to gigabit speed and beyond. Our investigation in this paper is the first to show that dynamic control has a severe scalability problem with bandwidth increase, and to propose an entirely new approach to traffic control that overcomes the scalability problem. The essence of our approach is in exercising control in bandwidth domain rather than time domain, in order to avoid time delay in control. This requires more bandwidth than the timed counterpart, but achieves a much faster control. Furthermore, the bandwidth requirement is not excessively large because the bandwidth for smaller control delay and we call our approach Bandwidth-Latency Tradeoff (BLT). While the control in existing schemes are bound to delay, BLT is bound to bandwidth. As a fallout, BLT scales tied to bandwidth increase, rather than increasingly deteriorate as conventional schemes. Surprisingly, our approach begins to pay off much earlier than expected, even from a point where bandwidth-delay product is not so large. For instance, in a roughly AURORA-sized network, BLT far outperforms TCP on a shared 150Mbps link, where the bandwidth-delay product is around 60KB. In the other extreme where bandwidth-delay product is large, BLT outperforms TCP by as much as twenty times in terms of network power in a gigabit nationwide network. More importantly, BLT is designed to continue to scale with bandwidth increase and the performance gap is expected to widen further

Traffic control mechanisms with cell rate simulation for ATM networks.

PhDAbstract not availabl

Performance analysis of an ATM network with multimedia traffic: a simulation study

Traffic and congestion control are important in enabling ATM networks to maintain the Quality of Service (QoS) required by end users. A Call Admission Control (CAC) strategy ensures that the network has sufficient resources available at the start of each call, but this does not prevent a traffic source from violating the negotiated contract. A policing strategy (User Parameter Control (UPC)) is also required to enforce the negotiated rates for a particular connection and to protect conforming users from network overload. The aim of this work is to investigate traffic policing and bandwidth management at the User to Network Interface (UNI). A policing function is proposed which is based on the leaky bucket (LB) which offers improved performance for both real time (RT) traffic such as speech and video and non-real time (non-RT) traffic, mainly data by taking into account the QoS requirements. A video cell in violation of the negotiated bit rate causes the remainder of the slice to be discarded. This 'tail clipping' provides protection for the decoder from damaged video slices. Speech cells are coded using a frequency domain coder, which places the most significant bits of a double speech sample into a high priority cell and the least significant bits into a high priority cell. In the case of congestion, the low priority cell can be discarded with little impact on the intelligibility of the received speech. However, data cells require loss-free delivery and are buffered rather than being discarded or tagged for subsequent deletion. This triple strategy is termed the super leaky bucket (SLB). Separate queues for RT and non-RT traffic, are also proposed at the multiplexer, with non pre-emptive priority service for RT traffic if the queue exceeds a predetermined threshold. If the RT queue continues to grow beyond a second threshold, then all low priority cells (mainly speech) are discarded. This scheme protects non-RT traffic from being tagged and subsequently discarded, by queueing the cells and also by throttling back non-RT sources during periods of congestion. It also prevents the RT cells from being delayed excessively in the multiplexer queue. A simulation model has been designed and implemented to test the proposal. Realistic sources have been incorporated into the model to simulate the types of traffic which could be expected on an ATM network. The results show that the S-LB outperforms the standard LB for video cells. The number of cells discarded and the resulting number of damaged video slices are significantly reduced. Dual queues with cyclic service at the multiplexer also reduce the delays experienced by RT cells. The QoS for all categories of traffic is preserved

Performance analysis of error recovery and congestion control in high-speed networks

In the past few years, Broadband Integrated Services Digital Network (B-ISDN) has received increasing attention as a communication architecture capable of supporting multimedia applications. Among the techniques proposed to implement B-ISDN, Asynchronous Transfer Mode (ATM) is considered to be the most promising transfer technique because of its efficiency and flexibility.In ATM networks, the performance bottleneck of the network, which was once the channel transmission speed, is shifted to the processing speed at the network switching nodes and the propagation delay of the channel. This shift is because the high-speed channel increases the ratio of processing time to packet transmission time and also the ratio of propagation delay to packet transmission time. The increased processing overhead makes it difficult to implement hop-by-hop schemes, which may impose prohibitably high processing at each switching node. The increased propagation delay overhead makes traffic control in ATM a challenge since a large number of packets can be in transit between two ATM switching nodes. Because of these fundamental changes, control schemes developed for traditional networks may not perform efficiently, and thus, new network architectures (congestion control schemes, error control schemes, etc.) are required in ATM networks.In this dissertation, we first present an extensive survey of various traffic control schemes and network protocols for ATM networks. In this survey, possible traffic control schemes are examined, and problems of those schemes and their possible solutions are presented. Next, we investigate two key research issues in ATM networks (and other types of high-speed networks): the effects of protocol-processing overhead and the efficiency of traffic control schemes.We first investigate the effects of protocol-processing overhead on the performance of error recovery schemes. Specifically, we investigate the performance trade-offs between link-by-link and edge-to-edge error recovery schemes. Our results show that for a network with high-speed/low-error-rate channels, an edge-to-edge scheme gives a smaller delay than a link-by-link scheme. We then investigate the effectiveness of a priority packet discarding scheme, a congestion control mechanism suitable for high-speed networks. We derive loss probabilities for each stream and investigate the impact of burstiness of traffic streams on the performance of individual streams