67 research outputs found
Stability Analysis for Markovian Jump Neutral Systems with Mixed Delays and Partially Known Transition Rates
The delay-dependent stability problem is studied for Markovian jump neutral systems with partial information on transition probabilities, and the considered delays are mixed and model dependent. By constructing the new stochastic Lyapunov-Krasovskii functional, which combined the introduced free matrices with the analysis technique of matrix inequalities, a sufficient condition for the systems with fully known transition rates is
firstly established. Then, making full use of the transition rate matrix, the results are obtained for the other case, and the uncertain neutral Markovian jump system with incomplete transition rates is also considered. Finally, to show the validity of the obtained results, three numerical examples are provided
BIBO stability analysis for delay switched systems with nonlinear perturbation
Extent: 8p.The problem of bounded-input bounded-output (BIBO) stability is investigated for a class of delay switched systems with mixed time-varying discrete and constant neutral delays and nonlinear perturbation. Based on the Lyapunov-Krasovskii functional theory, new BIBO stabilization criteria are established in terms of delay-dependent linear matrix inequalities. The numerical simulation is carried out to demonstrate the effectiveness of the results obtained in the paper.Jincheng Wei, Peng Shi, Hamid Reza Karimi, and Bo Wan
Coefficient Matrix Decomposition Method and BIBO Stabilization of Stochastic Systems with Time Delays
The mean square BIBO stabilization is investigated for the stochastic
control systems with time delays and nonlinear perturbations. A class of suitable Lyapunov
functional is constructed, combined with the descriptor model transformation and the decomposition
technique of coefficient matrix; thus some novel delay-dependent mean square BIBO
stabilization conditions are derived. These conditions are expressed in the forms of linear matrix
inequalities (LMIs), whose feasibility can be easily checked by using Matlab LMI Toolbox.
Finally, three numerical examples are given to demonstrate that the derived conditions are effective
and much less conservative than those given in the literature
Uniform bounded input bounded output stability of fractional‐order delay nonlinear systems with input
The bounded input bounded output (BIBO) stability for a nonlinear Caputo
fractional system with time-varying bounded delay and nonlinear output is
studied. Utilizing the Razumikhin method, Lyapunov functions and appropriate fractional derivatives of Lyapunov functions some new bounded input
bounded output stability criteria are derived. Also, explicit and independent on
the initial time bounds of the output are provided. Uniform BIBO stability and
uniform BIBO stability with input threshold are studied. A numerical simulation is carried out to show the system’s dynamic response, and demonstrate the
effectiveness of our theoretical results.publishe
Robust Delay Independent Stability Analysis for the Switched Interval Time-Delay Systems with Time-Driven Switching Strategy
Some new criteria of delay independent stability for the switched interval time-delay systems are deduced. The switching structure does depend on time-driven switching strategies. The total activation time ratio of the switching law can be determined to guarantee that the switched interval time-delay system is exponentially stable
LMI Approach to Exponential Stability and Almost Sure Exponential Stability for Stochastic Fuzzy Markovian-Jumping Cohen-Grossberg Neural Networks with Nonlinear p-Laplace Diffusion
The robust exponential stability of delayed fuzzy Markovian-jumping Cohen-Grossberg neural networks (CGNNs) with nonlinear p-Laplace diffusion is studied. Fuzzy mathematical model brings a great difficulty in setting up LMI criteria for the stability, and stochastic functional differential equations model with nonlinear diffusion makes it harder. To study the stability of fuzzy CGNNs with diffusion, we have to construct a Lyapunov-Krasovskii functional in non-matrix form. But stochastic mathematical formulae are always described in matrix forms. By way of some variational methods in W1,p(Ω), Itô formula, Dynkin formula, the semi-martingale convergence theorem, Schur Complement Theorem, and LMI technique, the LMI-based criteria on the robust exponential stability and almost sure exponential robust stability are finally obtained, the feasibility of which can efficiently be computed and confirmed by computer MatLab LMI toolbox. It is worth mentioning that even corollaries of the main results of this paper improve some recent related existing results. Moreover, some numerical examples are presented to illustrate the effectiveness and less conservatism of the proposed method due to the significant improvement in the allowable upper bounds of time delays
Digital repetitive control under varying frequency conditions
Premi extraordinari doctorat curs 2011-2012, àmbit d’Enginyeria IndustrialThe tracking/rejection of periodic signals constitutes a wide field of research in the control theory and applications area and
Repetitive Control has proven to be an efficient way to face this topic; however, in some applications the period of the signal to
be tracked/rejected changes in time or is uncertain, which causes and important performance degradation in the standard
repetitive controller. This thesis presents some contributions to the open topic of repetitive control working under varying
frequency conditions. These contributions can be organized as follows:
One approach that overcomes the problem of working under time varying frequency conditions is the adaptation of the
controller sampling period, nevertheless, the system framework changes from Linear Time Invariant to Linear Time-Varying
and the closed-loop stability can be compromised. This work presents two different methodologies aimed at analysing the
system stability under these conditions. The first one uses a Linear Matrix Inequality (LMI) gridding approach which provides
necessary conditions to accomplish a sufficient condition for the closed-loop Bounded Input Bounded Output stability of the
system. The second one applies robust control techniques in order to analyse the stability and yields sufficient stability
conditions. Both methodologies yield a frequency variation interval for which the system stability can be assured. Although
several approaches exist for the stability analysis of general time-varying sampling period controllers few of them allow an
integrated controller design which assures closed-loop stability under such conditions. In this thesis two design
methodologies are presented, which assure stability of the repetitive control system working under varying sampling period
for a given frequency variation interval: a mu-synthesis technique and a pre-compensation strategy.
On a second branch, High Order Repetitive Control (HORC) is mainly used to improve the repetitive control performance
robustness under disturbance/reference signals with varying or uncertain frequency. Unlike standard repetitive control, the
HORC involves a weighted sum of several signal periods. With a proper selection of the associated weights, this high order
function offers a characteristic frequency response in which the high gain peaks located at harmonic frequencies are
extended to a wider region around the harmonics. Furthermore, the use of an odd-harmonic internal model will make the
system more appropriate for applications where signals have only odd-harmonic components, as in power electronics
systems. Thus an Odd-harmonic High Order Repetitive Controller suitable for applications involving odd-harmonic type
signals with varying/uncertain frequency is presented. The open loop stability of internal models used in HORC and the one
presented here is analysed. Additionally, as a consequence of this analysis, an Anti-Windup (AW) scheme for repetitive
control is proposed. This AW proposal is based on the idea of having a small steady state tracking error and fast recovery
once the system goes out of saturation.
The experimental validation of these proposals has been performed in two different applications: the Roto-magnet plant and
the active power filter application. The Roto-magnet plant is an experimental didactic plant used as a tool for analysing and
understanding the nature of the periodic disturbances, as well as to study the different control techniques used to tackle this
problem. This plant has been adopted as experimental test bench for rotational machines. On the other hand, shunt active
power filters have been widely used as a way to overcome power quality problems caused by nonlinear and reactive loads.
These power electronics devices are designed with the goal of obtaining a power factor close to 1 and achieving current
harmonics and reactive power compensation.Award-winningPostprint (published version
Robust load frequency control of interconnected grids with electric vehicles
This thesis presents new load frequency controls of interconnected grids, using electric vehicles to assist power plants in providing stability, which fluctuates with load demands and renewable powers. New robust control schemes for comprehensive power systems with electric vehicles, diverse transmission links, network-induced time delays and uncertainties are investigated.<br /
- …